FOREVER VR-300 User manual
FOREVER VR-300 CAR VIDEO RECORDER
USER’S MANUAL
Thank you for purchasing Forever car video recorder. Before using this product, please read
this manual carefully to learn more about the functions and operating way. We hope that you will
enjoy Forever’s product.
Appearance and function
POWER SUPPLY
a) Built-in Li-Ion battery - car video recorder can be turned on by pressing the Power
button for 3 seconds and turned off in the same way. Connect the attached USB cable to
the device and the power supply. Charging will start when the red diode turns on. When
the red diode disappears, the device is fully charged.
b) Connect the charger - the video recorder will automatically turn on when the car starts
and turn off when the car stops.
SPECIFICATIONS
Recording size: 1920 x 1080 / 1440 x 1080 / 1280 x 720
Video format: avi
Supported card: microSD up to 32GB
Microphone: ability to record sound
Display: 2.7” rotating 170 degree
Charging socket: mini-USB
G-Sensor: 8-levels sensitivity
KEY FUNCTIONS
Menu key: Click to select the menu inside.
Mode key: Press once to switch into camera mode, press twice to convert the file browser
interface.
Up key: Menu state for menu selection, playback status for browsing pictures, in state of video
playback, fast forward, fast backward operation.
Down key: Menu state for menu selection; playback status for browsing pictures; in the state of
video playback, fast forward, fast backward operation.
REC/OK key: Start/stop recording; menu state, used to confirm menu settings, video playback
status, for start and pause playback.
RECORDING AND SETTINGS
Press the REC button to start recording. In the recording process, a red icon should show up on
the screen. Press the REC button again to stop the camera.
1. Digital zoom: press up/down key to control
2. Resolution, select recording resolution: 1920*1080/30fps, 1440*1080/30fps,
1280*720/30fps
3. Audio: on and off the MIC to switch sound recording
4. Loop recording: set 3/5/10 minutes
5. Motion detection: turned on/off motion detection function
6. Volume: range from 0 (min.) to 7 (max)
7. Date/clock: set the date and clock using the up and down arrow keys, press the “OK”
button to confirm and enter the next setting.
8. Reset system: Yes / No
9. Auto power off: 1/3/5 minutes
10. TV output: NTSC/PAL
11. Optical frequency 60HZ/50HZ
12. Automatic off-screen: ⅓ minutes
13. G-Sensor: recognizes hits and bumps and prevents the video from overwriting after
collision
System reset: use to set system parameters to original values
Automatic shutdown: use to set to automatic shutdown when recording stops
Frequency: use to select the frequency of the power line, if you choose the wrong light
frequency, the image will appear horizontal stripes interference
Automatic off-screen: set the time for the screen to automatically shut off in order to save
battery. Press and key to turn the screen back on.
Using the microSD card:
1. Make sure to properly insert the card. Otherwise you can damage the card or the video
recorder.
2. Please use a high-speed SD card with SDHC specifications for best performance
3. Format the card before recording anything
TROUBLESHOOTING
1. Problems with saving: check if the SD card has been properly inserted
2. The recorder automatically stops while recording: due to huge amount of data in
high-definition, please use an SDHC compatible high speed SD card
3. No image displayed on high-definition television: make sure the AV/HDMI cable is
properly connected to the TV. Also, make sure you’re checking the right source channel.
4. Blurry photos: please check if there is a stain or any fingerprints on the lens. Clean the
lens before recording.
Table of contents
