Forest garden MGHFP User manual

DRILL

POZI DRIVE SCREWDRIVER

HAMMER

MGHFP (FIXING PACK)

Important : Assembly

of this product requires

two people.

REQUIRED TOOLS :

(NOT SUPPLIED)

Thank you for choosing this garden building manufactured by the UK's largest manufacturer of timber garden products. In order to gain the most benefit from it,

please note the following:

– If there are any technical queries with the product, please contact our customer help line on 0333 7777 089 between the hours of 8.30 am and 5.00 pm Monday to

Friday.

- Timber is a natural material. It will shrink and swell as a result of varying moisture content.

- This product is pressure treated to ensure the longevity of all timber components and protect against rot. This may leave a colour difference on some parts that will even

out as the moisture content stabilises.

- In line with your statutory rights, please check all parts prior to assembly, as assembly of damaged parts may be deemed to be acceptance and this may affect the

remedies you are entitled to. If the product is not constructed in accordance with the instructions, or is altered in anyway (eg painted), the manufacturer cannot be held

liable for any resulting damage.

- Please keep all plastic bags and small parts away from children in order to reduce the risk of suffocation.

- Make sure that you are building this product on a firm level base.

- This product is for DOMESTIC USE ONLY. Please keep these instructions for future reference.

1200mm

1443mm

624mm

PW475100802

Door Glazing

QTY 2

MGCLSPTR

Left Hand Side

QTY 1

MGCRSPTR

Right Hand Side

QTY 1

MGWINPTR

Window

QTY 2

MGHDRPTR

Door

QTY 2 MGHBPPTR

Back Panel

QTY 1

MGHSLF

Shelf

QTY 2

PW6065402

Window Glazing

QTY 2

PW7795402

Side Panel Glazing

QTY 2

21120475PTR (21x12x475mm) QTY 4

40121132PTR (cover strip) QTY 2 45281086PTWB (45x28x1086mm with badge) QTY 1

PC1550050 (plastic clip )

44120510PTR (prop) QTY 2

45281086PTR (45x28x1086mm ) QTY 1

21120986PTR (21x12x986mm ) QTY 4

21120542PTR (21x12x542mm ) QTY 4

Turn Button

40mm SCREW

60mm SCREW

25mm NAIL

Handle

Corner Brace 20mm PINS

MUST PRE DRILL

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

21120756PTR (21x12x756mm ) QTY 4

3”Butt hinge

25mm PINS

2”Flush hinge

3.0 x 25mm screw

6.5mm

3.0 x 25mm screw

5.5mm

4.5 x 25mm screw

9.0mm 7.5mm

4.0 x 25mm screw

Forest Garden Ltd, Unit 288 Hartlebury Trading Estate, Hartlebury, Worcestershire, Dy10 4JB

MINI GREEN HOUSE

Issue 0116

MGHFP

MGCLSPTR

MGHBPPTR

Slide the window glazing into

the recesses in the window so

that it is tight against the top.

Position two of the plastic clips

at the bottom of the glazing to

stop it from sliding out.

Secure each clip in place using

the 20mm panel pins for each.

60mm SCREW

Fix the left and right

hand side panels to the

back panel as shown

using 3x60mm screws

for each, screwing

through the back panel

frame work into the

side panel.

Place the side panels on the

floor and slot the side panel

glazing into the recess so it sits

flush.

Place the beading

(21x12x540mm) tight against

the top and bottom of the

recess. Next position the

(21x12x756mm) pieces on

either side.

Secure each beading in place

using 3 panel pins for the sides

and 2 for the top and bottom.

21120540PTR

PW6065422

21120475PTR

MGWINPTR

MGCLSPTR

Place the door on the floor and

slot the door glazing into the

recess so it sits flush.

Place the beading

(21x12x475mm) tight against

the top and bottom of the

recess. Next position the

(15x12x986mm) pieces on

either side.

Secure the 986mm beading in

place using 3 panel pins and 2

panel pins for the 475mm

beading.

PW7795402

21120756PTR

21120986PTR

MGHDRPTR

PW475100802

MUST PRE DRILL

QTY 8

QTY 6

PIERCE THESE

BEFORE

POSITIONING

25mm PINS QTY40

20mm PINS

Place a prop on the inside of each side

panel as shown. Secure at one end

using a 40mm screw. Make sure the

prop can pivot.

PRE-DRILL

MUST PRE DRILL

QTY 16

Place four of the corner braces on the underside of

each shelf on both of the end battens as pictured.

Secure each in place with 2 x 25mm screw.

Mark the desired height of the shelf on the inside of

the framework. Secure the shelf in position by

securing each brace to the frame using 2x25mm

screw for each brace.

Repeat the step for the second shelf.

45281086PTWB

45281086PTR

In the same manner as the previous

step, fix the corner braces to the

battens. Secure the

45x28x1086mm (with Badge)

batten at the top and inside of each

of the side panels as illustrated.

Repeat for the 45x28x1086mm

batten at the bottom.

UNDERSIDE OF SHELF

MUST PRE DRILL

25mm screw

QTY 32

QTY 2

40mm SCREW

INSIDE

PLACE AT HIGHEST POINT

6.5mm

Issue 0116

Fix two flush hinges to each of the

windows, equally spaced, using 2x25mm

screws for each hinge. Fix the inner part

of the hinge to the window

Then secure the windows to the rest of

the assembly as shown using a further

2x25mm screws per hinge

3.0 x 25mm screw 6

QTY 16

MUST PRE DRILL

5.5mm

Fix two hinges to each of the doors,

equally spaced, using 3x25mm screws

for each hinge.

Then secure the doors to the rest of the

assembly as shown using a further

3x25mm screws per hinge

Fix the two cover strips to the front of the

product so that it is flush with the sides.

Secure in position by using 2x25mm

nails for each board.

Fix the turn buttons to the

top and bottom of the

closed door using a 3.0 x

25mm screw for each.

Make sure that they turn

to keep the door shut.

Fix two Butt hinges to each of the doors,

equally spaced, using 3x25mm screws

for each hinge. The barrel of the hinge

must sit proud of the front of the door.

Then secure the doors to the rest of the

assembly as shown using a further

3x25mm screws per hinge

Fix a turn button on the inside and at

the top and bottom of the one of the

doors using a 25mm screw for each.

QTY 4

QTY 2

QTY 24

MUST PRE DRILL

3.0 x 25mm screw

QTY 16

3.0 x 25mm screw

7.5mm

6.5mm

9.0mm

4.0 x 25mm screw

Place a handle on the

front and centre of

each window, and the

centre of each door.

Secure in position

using the 4.0 x 25mm

screws provided.

QTY 2

3.0 x 25mm screw

9.0mm

MUST PRE DRILL

Forest Garden Ltd, Unit 288 Hartlebury Trading Estate, Hartlebury, Worcestershire, Dy10 4JB

MUST PRE DRILL

Other Forest garden Greenhouse Kit manuals

Forest garden

Forest garden Walk Around User manual

Popular Greenhouse Kit manuals by other brands

ACD PRESTIGE

ACD PRESTIGE MR3 H manual

Vitavia

Vitavia VA0040-TRP Assembly instructions

VegTrug

VegTrug Nursery manual

Riverstone Networks

Riverstone Networks Monticello 041315V Assembly instructions

STC

STC Easy Grow 6x12 Greenhouse Assembly instructions

CLIMA POD

CLIMA POD Spirit V7 Series Assembly instructions

Vitavia

Vitavia GAIA JUMBO Assembly instructions

Palram

Palram Harmony 6'x4' Assembly instructions

ClearSpan

ClearSpan Storage Master 104598 instruction manual

Sproutwell

Sproutwell GRANGE - 5 Assembly instructions

ACD

ACD Piccolo 03 manual

Growhouse

Growhouse Lean To 6 x 8 Erection and Glazing Instructions

Riverstone Networks

Riverstone Networks Grower's 181010V Assembly instructions

GrowSpan

GrowSpan 500 Series manual

Robinsons

Robinsons 5ft Wide LEAN-TO Assembly instructions

Botanica

Botanica E manual

PNI

PNI SP6000 user manual

Hortus

Hortus 211-203 Assembling manual