4
Howto useController
9
1
Howtouse buttons
*SequenceofModeConversion (Normalmode→QUICKmode→DMXaddresssetting mode→Normalmode )
DETAIL
1
2
4
35
7
68
ToSetLOCKMode : 2~3secondspress‘MODE’ button once,ontheLCD displaywindow'LOCK' displaysand
isset. (Note:when‘LOCK’modeisset,CCTand DIMcan’tbe changed)
ToUnlock
:
In‘LOCK’mode,when2~3 secondspress‘ADJUST ’ buttononce,‘LOCK’disappearsfromtheLCD
displaywindowand isreleased.
ToSetQUICKMode : Short-press‘MODE’buttononce,on the LCD display window‘QUICK’displays.
PressQ1▲buttonto 3200K or Q2▼ buttonto5600K (Defaultvalue).Atthistime,DIMandCCTcan be adjusted.
How to adjust/set desired CCT value :In‘QUICK’mode,press‘ADJUST’button and CCT value is blinking.Please turn
CCT dial to selectCCT valueandpress‘ADJUST’buttontoset.
Returntodefaultcondition:PressandholdQ1▲ buttonand press Q2 button.
To Turn QUICK Mode Off : In‘QUICK’ mode, when press‘MODE’ button once,‘QUICK’disappears from the LCD
display window.And‘QUICK’is released and transfer to DMX Address setting mode.(At this time,CCT is automati-
callygoingbacktothe previous valueusedinnormalmode.)
To Set DMX Address :
Press‘MODE’ button twice, on the LCD display window‘DMX’ appears and address is
blinking.Atthistime,setDMX address using Q1▲/Q2▼button.Please press‘ADJUST’button to savetheaddress,
then it switches to normal mode. (Note :when it is connected with DMX console,DMX mode is automatically set
andthe followingis how to set DMX address.– Press‘MODE’button once.Whenaddress isblinking,pleasesetthe
addressusingQ1▲/Q2▼buttonandpress‘ADJUST’buttontosavethe address.)
