C. PRODUCT USAGE
First start:
1. Make sure that the power switch is OFF before connecting the power cable.
2. Connected with power cable or batteries before turning on the light.
3. The color temperature range is 3000K – 8000K.
4. The power output is from 0% - 100%.
5. The color temperature and the brightness can be controlled by knob, LCD display or
through
the mobile application „L-control“.
WIFI LED operation:
A. Connect to single LED light
1. Turn on the light.
2. The light should be in „single light mode“ in default. If the light is in „multi light mode“,
press the „Reset“ knob for 6s until the red indicating light flash 4 times quickly.
3. The red light will twinkle slowly when i tis in „single light mode“.
4. On your mobile phone search and enter WIFI channel named „LEDXXXX“ („XXXX“ is the
number of the light).
5. The password is „candlehome“.
6. Get into the „L-control“ application and you can find the light got connected. If not,
press
the icon with the WIFI symbol.
7. Click the unit to enter the control menu for any light adjustments. Or you can directly
adjust the settings (color temperature, brightness) on the main menu by entering figures.
B. Connect to multi LED lights
1. Turn on the lights.
2. Press the color temperature adjustment knob for 2s until the red indicating light flash 2
times quickly.
3. The red indicating light blinks fast, it is in „searching mode“.
4. Switch on your router, most of the router available on market is fine to use.
5. Search your WIFI router channel on your mobile phone.
6. Get into the „L-control“ application and you can find the router got connected. If not,
press
the icon with the WIFI symbol.
7. The menu will display all connected units.
8. You can click on the settings for fast adjustment.
Important!
- Do not cover vents on the light!
- Be careful about humidity and water, light is not water resistant.
- Do not disassamble the light. If there is any problem, please contact our service facility.
