FOGE VL-BAL Series User manual

Instruction Manual

Product: VL-BAL Series

Long Bar Light

FÖGE ELEKTRONIK GMBH

Böhleswasenweg 11

72555 Metzingen

www.fogegmbh.com

info@fogegmbh.com

+49 7123 9570508

P1 Ver. 20.3.001

1. Intended Use

2. Technical Information

VL-BAL Series Long Bar Light is designed for use in industrial areas.

Purpose of the product is inspection of parts, code reading, OCR and

other applications need to be illuminated directly or with angle. Light is

positioned between part and camera..

The system must be operated within the limits specified in technical data

and used according to technical specifications as well as installation

instructions. The system must be used in such a way that no person are

in danger or machines and other material goods are damaged in the

event of malfunction or total failure of the system. Take additional

precautions for safety and damage prevention in case of safety related

applications

P2 Ver. 20.3.001

VL-BAL-25-400-R-24-C30 R 660nm 24VDC 11W M8 4 pin w 300mm cable 25 400 49 455 100

VL-BAL-25-400-W-24-C30 W 9000K 24VDC 16W M8 4 pin w 300mm cable 25 400 49 455 100

VL-BAL-25-500-R-24-C30 R 660nm 24VDC 14W M8 4 pin w 300mm cable 25 500 49 555 100

VL-BAL-25-500-W-24-C30 W 9000K 24VDC 20W M8 4 pin w 300mm cable 25 500 49 555 100

VL-BAL-25-600-R-24-C30 R 660nm 24VDC 16W M8 4 pin w 300mm cable 25 600 49 655 100

VL-BAL-25-600-W-24-C30 W 9000K 24VDC 24W M8 4 pin w 300mm cable 25 600 49 655 100

VL-BAL-25-700-R-24-C30 R 660nm 24VDC 19W M8 4 pin w 300mm cable 25 700 49 755 100

VL-BAL-25-700-W-24-C30 W 9000K 24VDC 28W M8 4 pin w 300mm cable 25 700 49 755 100

VL-BAL-25-800-R-24-C30 R 660nm 24VDC 22W M8 4 pin w 300mm cable 25 800 49 855 100

VL-BAL-25-800-W-24-C30 W 9000K 24VDC 32W M8 4 pin w 300mm cable 25 800 49 855 100

VL-BAL-25-900-R-24-C30 R 660nm 24VDC 24 M8 4 pin w 300mm cable 25 900 49 955 100

VL-BAL-25-900-W-24-C30 W 9000K 24VDC 36W M8 4 pin w 300mm cable 25 900 49 955 100

VL-BAL-25-1000-R-24-C30 R 660nm 24VDC 27 M8 4 pin w 300mm cable 25 1000 49 1055 100

VL-BAL-25-1000-W-24-C30 W 9000K 24VDC 40W M8 4 pin w 300mm cable 25 1000 49 1055 100

VL-BAL-25-1100-R-24-C30 R 660nm 24VDC 30 M8 4 pin w 300mm cable 25 1100 49 1155 100

VL-BAL-25-1100-W-24-C30 W 9000K 24VDC 44W M8 4 pin w 300mm cable 25 1100 49 1155 100

VL-BAL-25-1300-R-24-C30 R 660nm 24VDC 35W M8 4 pin w 300mm cable 25 1300 49 1355 100

VL-BAL-25-1300-W-24-C30 W 9000K 24VDC 52W M8 4 pin w 300mm cable 25 1300 49 1355 100

VL-BAL-25-1500-R-24-C30 R 660nm 24VDC 40W M8 4 pin w 300mm cable 25 1500 49 1555 100

VL-BAL-25-1500-W-24-C30 W 9000K 24VDC 60W M8 4 pin w 300mm cable 25 1500 49 1555 100

VL-BAL-25-1700-R-24-C30 R 660nm 24VDC 46W M8 4 pin w 300mm cable 25 1700 49 1755 100

VL-BAL-25-1700-W-24-C30 W 9000K 24VDC 68W M8 4 pin w 300mm cable 25 1700 49 1755 100

VL-BAL-25-2000-R-24-C30 R 660nm 24VDC 53W M8 4 pin w 300mm cable 25 2000 49 2055 100

VL-BAL-25-2000-W-24-C30 W 9000K 24VDC 80W M8 4 pin w 300mm cable 25 2000 49 2055 100

VL-BAL-25-2500-R-24-C30 R 660nm 24VDC 65W M8 4 pin w 300mm cable 25 2500 49 2555 100

VL-BAL-25-2500-W-24-C30 W 9000K 24VDC 100W M8 4 pin w 300mm cable 25 2500 49 2555 100

Model

Wavelength/

Color

Temperature

Power

Suppy Power Consumpon Connecon A(mm) B(mm) C(mm) D(mm) E(mm)

Colour

3. Dimensions / Installation

System operation assumes knowledge of the assembly instructions. The

symbols used for safety is shown in section 8(Safety) of manual.

P3 Ver. 20.3.001

Sample Applications

Diaper inspecon, non woven

inspecon, web inspecon

Part posioning, locaon on

large bins

Color check, part assembling,

posioning

Big metal part posioning,

checking holes, classiﬁcaon

Part posioning, existance,

angle checking Large part posioning,

orientaon to robots, LCD

panel

Large area counng parts, cap

counng, posioning

Large area linescan

applicaons, washing

machine drum

Camera

VL-BAL

Part

Product does not have this specification.

P4 Ver. 20.3.001

4.Electrical Connection

5. Display/Controls

6. Faults

In any case do not open the product.

If the leds not on check the connection and power supply.

If still leds are not on contact FÖGE or distributor.

7. Warnings

Connect the power supply and the display/output device according to the safety

regulations for electrical equipment.

The supply voltage must not exceed the specified limits.

Avoid shocks and impacts to the sensor.

Protect the cable against damage.

•

Possible Results of Avoidance

Risk of injury by electric shock

Damage to or destruction of the sensor

P5 Ver. 20.3.001

8. Safety

System operation assumes knowledge of the assembly instructions. The

following symbols are used in these assembly instructions:

9.Liability for Material Defects

All components of the device have been checked and tested for functionality at the production

facility. However, if defects occur despite our careful quality control, FÖGE or your dealer must be

notified immediately.

The liability for material defects is 12 months from delivery.

Within this period, defective parts, except for wearing parts, will be repaired or replaced free of

charge, if the device is returned to FÖGE with shipping costs prepaid. Any damage that is caused by

improper handling, the use of force or by repairs or modifications by third parties is not covered by

the liability for material defects. Repairs are carried out exclusively by FÖGE.

Further claims can not be made. Claims arising from the purchase contract remain unaffected. In

particular, FÖGE shall not be liable for any consequential, special, indirect or incidental damage. In

the interest of further development, FÖGE reserves the right to make design changes without

notification.

10. Decommissioning, Disposal

Remove the power supply and output cable on the sensor.

Incorrect disposal may cause harm to the environment.

Dispose of the device, its components and accessories, as well as the packaging materials in

compliance with the applicable country-specific waste treatment and disposal regulations of the

region of use.

Indicates a hazardous situation which, if not avoided, may result

in minor or moderate injury.

Indicates a situation that may result in property damage if not

avoided.

Indicates an electrical shock if not avoided or properly follow

comments.

P6 Ver. 20.3.001

This manual suits for next models

Table of contents

Other FOGE Lighting Equipment manuals

FOGE

FOGE VL-FLD Series User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions