Fmart YZ-X1 User manual
INSTRUCTION MANUAL
SUJKR ?@>
1 Important Safety Instructions.......................................................................1
2 Product Components...................................................................................2
2.1 The main machine and accessories.................................................................2
2.2 The main machine......................................................................................3
2.3 Charging station.........................................................................................3
2.4 Dustbin....................................................................................................4
2.5 Water tank...............................................................................................4
2.6 Side brush...............................................................................................4
2.7 Remote control..........................................................................................4
3 Product Operations......................................................................................6
3.1 Quick start guide........................................................................................6
3.2 Start/Pause/Standby mode...........................................................................7
3.3 Plan mode...............................................................................................7
3.4 Cleaning mode..........................................................................................8
3.5 Water tank and mop operation.......................................................................9
4 Product Maintenances................................................................................11
4.1 Cleaning of side brush...............................................................................11
........................................................................11
4.3 Cleaning of sensors and charging poles.........................................................12
4.4 Cleaning of main brush..............................................................................12
4.5 Water tank maintenance.............................................................................13
4.6 Battery replacement..................................................................................13
5 Resume to default setting...........................................................................14
6 Troubles Shooting.......................................................................................15
7 Product Parameters....................................................................................16
Table of Contents
狣
1 Important Safety Instructions
Warning! Violation of safety instructions may cause
severe personal casualty and property loss.
Do not attempt to disassemble or
revise the main machine, otherwise
personal injury.
Do not touch the power cord with wet
hand, otherwise may cause electric
shock.
Do not touch wheels and brushes when
the product is working and keep your
clothes and hair away from the product
when it is working.
Always use the original charger with
this product, otherwise may cause
Do not put weight on the power cord or
bend the power cord, otherwise may
Keep the product away from heat or
Attention! Violation of safety instructions may
cause personal injury and product damage.
Please switch the product off when you
will not use it for a long time.
Please take careful of children when
use the product to avoid scaring or
injury.
Do not use the product to vacuum
water or other liquids, otherwise may
cause product damage.
This product is intended to be an
indoor appliance. Never use it outdoor.
Make sure the charger plugged in the
socket tightly, otherwise may cause
electric shock, short-circuit, smoke or
Clear up all fragile, braided fabrics,
glasses or bottles before use it,
otherwise may cause damage.
Do not stand or sit on the product,
otherwise may cause product damage
or personal injury.
Do not use the product on an easy
falling place such as table or chair to
avoid product damage.
Do not use it in public commercial
places.
When people with disabilities (body perception and thinking ability defects) and children
using, need to be operated under the guardian to accompany with product use and get
the related instructions.
Please read the following safety instructions before using this product to
avoid damage.
Do not use the product to vacuum
stone, big waste paper, burning
cigarette ends or metals.
2 Product Components
2.1 The main machine and accessories
No. Name Quantity
1Main machine 1pc
2Charging station 1pc
3Remote control 1pc
4Adapter 1pc
5Cleaning brush 1pc
6Insturction manual 1pc
7Side brush 2pcs
8Water tank 1pc
Attention:
Please take actual product shall prevail on the basis of not less than the above accessories.
2 Product Components
2.2 Main machine
2.3 Charging station
1.Signal projector
2.Charging poles
3.Indication light
4. Adapter socket
1. Signal receiving
sensor
2. Clean button
3. Bumper
4. Panel
5. Universal wheel
6. Charging poles
7. Battery cover
8. Stair detection
sensor
9. Main brush
10. Dustbin
11.Dustbin cover button
12.Charging socket
13. Side brush
14. Drving wheel
2 Product Components
2.4 Dustbin
3.Dusbin upper cover
4. Dusbin botton cover
2.5 Water tank
1. Water tank button
2. Water inlet cap
3. Air valves
4. Mop
2.6 Side brush
Please install the side brush according to the color
of the socket of the side brush. Left brush is green
color, and right brush is red color.
2.7 Remote control
1
The robot is in standby or cleaning mode, press this button to start auto recharging. Voice
prompt “DING”
2
1 Press this button to change standby mode from sleep mode (power switch is on).
3
2 Press the button in other woking mode, it will stop working and continue work in the pre-
timeout mode after you press the button again.
狧
2 Product Components
4
Press direction button to adjust the robot
moving direction.
5
Press this button for 3 seconds to start time
6
The main machine will start the distribution net
work if press the button for a long time which
above 3 seconds.
7
Press the botton for 3 seconds for the
appointment cleaning, press the On/Off button
remind you successful appointment with “Ding”.
Please set the time to 00:00, meanwhile,
the appointment function. The machine will
8
9
Press the button for one time in standby mode or working mode, the machine will trun “On/Off”
10
Press the button in standby mode or working mode, it will start the spot cleaning mode with
Attention:
1 Please install 2 AAA/R03(No.7) battery.
2 Please take out battery when you do not use for a long time.
3 Remote control will be in standby mode in a few seconds after use, please press any key to
wake up it.
3 Product operations
3.1 Quick start guide
1.Place charge
Place charger, connect the adapter and
power, and the power light on the charger
will stay lit. Position the charger against
the wall, and remove all obstacles about 1
or 2 meters ahead of the charger.
2. Power Switch
Turn on the power switch of the product, and press directly the sweep button on the panel, voice
prompts:enter cleaning mode, the product is start to clean.
this time the product will into the state of APP connecting network, after successful connection,
voice prompts，successful network connection. Then the users can remotely control the main
engine.
3. Main machine sweep button
Turn on the power switch of the product, and
press directly the sweep button on the panel, it
will begin with a zigzag path cleaning.
4.Product charging
There are two methods of charging.
1 Plug the power adapter directly to the
machine and the other end is plugged in
the power.
2 When the charge is lower than 20%, the
machine will automatically start looking for
recharge stand, or press the recharge
button on the remote control to return
the automatic charger. Automatic
recharge-sensing distance as in the
charging a RADIUS 4m, please ensure
that the charger is powered and obstacle
.
8UHUZ
'JGVZKX
6U]KX
PP
P
狩
3 Product operations
Attention:
1 When charging, make sure the power switch is on.
2 using the charger stand will interrupt the charging and start the cleaning, so please do not
make this operation when using thedirect charge.
4 When charging, the cleaning button blinks, and when fully charged, the cleaning button stops
blinking, and lit permanently.
5 Please switch the main machine off when long time no use.
3.2 Pause/Standby mode
1. This model operation process: sleep mode>Standby mode>Cleaning
mode
1 Sleep mode: power switch is on, CLEAN button light is off, the robot does not work.
2 Standby mode: power switch is on, CLEAN button light is on, the robot does not work.
3 Cleaning mode: the robot is cleaning, CLEAN button light is off.
2.Start
1 Please turn on the switch at the bottom of the
machine.
2 Press sweep button on the machine or on
the remote control to automatically start the
machine to work.
Attention:
When the robot is in sleep mode, press CLEAN
button on the main machine to wake it up, press
again to start cleaning.
3.Standby mode
Standby mode refers to the machine switching from working status to static status. Press the
sweep button on the machine or switch button on the remote control to operate.
4.Sleep mode
In standby mode without any operation the machine will enter into standby mode after 2
minutes, or press the On/Off Button on the remote control and the machine is in static status
and the button indicator light is off.
3.3 Plan mode
Under the plan mode, the machine can work at a preset time.
1.Set the remote controller clock time
狪
3 Product operations
according to “up, down, left and right” direction button.
2 Press the clock button once again to save the setting.
2.Set the pre-scheduled cleaning time
1 Point the remote controller at the machine (the machine is in standby status).
2 Long press the “plan” button in the remote controller for 3 seconds into the plan mode, and set
3 Press the on/off button to save the settings.
4 Please set the time to 00:00 if you want to cancel the appointment function. Press the On/Off
Attention:
1 Set clock for your remote control before cleaning, the time settings are using real time.
2 Replace the remote control batteries, reset the appointment.
3 This machine uses real time for an appointment. If power is off, you will need to make an
appointment.
4 Make an appointment for each half hour, clock settings are in minutes.
5 It just can be set once if you make appointment by the remote control, please set by APP if
you want to make several appointments.
3.4 Clean mode
1.Automatic clean
Press the plan cleaning key on host or the
key on remote then product into the bow-
shaped path planning mode of cleaning, will
after cleaning
Attention:
Machine in any cleaning mode, press the
remote control "on/off" button or sweep button
on the machine to stop working.
Table of contents
