Introduction
Thank you for choosing the DLB100 DMX LED light bar as part of your lighting display.
This product is designed to offer colour and movement to walls and ceilings with full internal
or DMX control. Please read this manual in full to achieve the best results from your purchase.
Unpacking
Your DLB100 should reach you in good condition, supplied with appropriate mains lead(s) and
mounting feet. If there is any damage or items missing from the packaging, contact your
dealer immediately.
Warning
To prevent risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the housing, disconnect mains, allow unit to dry out and have the unit
checked by qualified personnel before further use.
No user serviceable parts inside –do not open –refer all servicing to qualified personnel.
Safety
Check for correct voltage and condition of IEC lead before connecting to power outlet
Ensure DMX leads are in good condition with no short connections or damaged plugs
Do not daisy chain IEC mains for more than 30 units
Placement
The DLB100 is supplied with mounting feet which allow the bar to tilt on its axis
The mounting feet can be used to fix the DLB100 to a wall or ceiling if required
If mounted at height, attach a drop cable for safety
Ensure adequate access to controls and connections
Cleaning
Use a soft dry or slightly damp to clean the cabinet and lenses. Do not use solvents
