Flower House BloomHouse Manual
Self-erecting portable greenhouses Set up Instructions
Step 1: Remove
your BloomHouse™
from the pack. Place
the hub ends on the
ground.
Step 2: Open the
Bloomhouse™ from the top and
lay it on the ground. It will open
up into a star shape. NOTE: It
will not lay flat.
Step 3: Reach to the center of
the BloomHouse™ and grab the
strap attached to the hub. Pull
firmly on the strap.
Step 4: The top will pop up.
Step 5: Then lift the top of the BloomHouse™ so you can reach
the hub strap of one of the walls. Grab the strap and pull firmly
until the wall pops out. As shown in "E & F"
Step 6: Repeat STEP 4 with 3 remaining
sides. Pull firmly on each hub strap until all of
the walls are popped out. Shown in "G & H".
Page 1
Self-erecting portable greenhouses
Page 2
Step 7: Secure your BloomHouse™ using the
supplied stakes. Insert the stakes into the stake holes
of the skirt at 45°angle. Keep as much tension on the
rope as possible. Repeat this step with all hub
locations. For added safety, attach the remaining 4
high-wind tie-downs to the top 4 corners of the
BloomHouse™ and secure them with stakes.
Step 8: The doorway and vents of the
BloomHouse™ can be secured open for
ventilation. To secure them, first unzip them.
Roll them up and use the straps to hold them
in place. Shown in "11& 12".
Parts List:
BloomHouse™ (84" x 84" x 84")
Ground Stakes
High-Wind Tie-Downs
Shade Cover
Set up Instructions
Self-erecting portable greenhouses Take Down Instructions
Step 1: To take down your
BloomHouse™ begin by removing all
high-wind tie-downs and stakes. It
may be easier for you to use the head
of one stake to remove
another. Shown in A.
Step 2: With an open palm, push on the hub of one of the
walls. It will collapse. Continue around the BloomHouse™,
pushing on the hubs of the walls, until all 4 walls have
collapsed.
Step 3: Reach to the center of the BloomHouse™ and push
in the hub so the roof will collapse. REMEMBER: It will not
lat flat. Shown in "D & E".
Step 4: Gather the corners of
the BloomHouse™
Step 5: Use the provided
material to tie around it to hold
it place.
Step 6: Place the BloomHouse™ in its pack with the hubs
down. Store the stakes and high-wind tie-downs in the
pouches provided and place them in the pack. Now you can
take your BloomHouse™ anywhere!
Page 1
Other Flower House Greenhouse Kit manuals
Popular Greenhouse Kit manuals by other brands
ACD PRESTIGE
ACD PRESTIGE MR3 H manual
Vitavia
Vitavia VA0040-TRP Assembly instructions
VegTrug
VegTrug Nursery manual
Riverstone Networks
Riverstone Networks Monticello 041315V Assembly instructions
STC
STC Easy Grow 6x12 Greenhouse Assembly instructions
CLIMA POD
CLIMA POD Spirit V7 Series Assembly instructions
