Flory 860 User manual
PARTS CATALOG
FLORY
TRACTOR POWERED
HARVESTER
MODEL
850-860
As much as possible, parts are arranged in groups of related parts. Parts are
illustrated and identified by reference numbers that correspond to the parts list.
UAR in “Quantity” column indicates that this part is “Used As Required.” NSS in
“Part No.” column indicates that this part is “Not Sold Separately.” Serial Number
breaks are noted by “~”. (I.E. “s/n 101~” indicates “serial number 101 and after.”)
TERMS “RIGHT-HAND” AND “LEFT-HAND”
“Right-hand” and “Left-hand” sides of this machine are determined by
standing at the rear of the unit and facing the direction of forward travel.
ORDERS
Orders should plainly specify correct part number, full description, quantity
requested machine model and serial number.
PHONE (209) 545-1167 FAX (209) 545-2750
FLORY INDUSTRIES, INC. 4737 TOOMES RD PO BOX 908 SALIDA CA 95368
Revised 6/29/16
850-860 HARVESTER
SERIAL
NUMBER:_____________________
DATE OF PURCHASE: _________________
850-860 PARTS MANUAL
TABLE OF CONTENTS
FRONT HITCH AND PTO DRIVESHAFT 4-5
ROTARY TRAP AND PICKUP BELT 6-9
SUCTION FAN DRIVE 10-13
SUCTION FAN AND INLET TUBE 14-17
PRIMARY SEALS AND DRIVES 18-23
REAR LIGHTS 24-25
ELEVATOR SEALS AND DRIVES 26-29
CLEANING CHAINS 30-33
SHIELDS 34-35
HYDRAULIC TANK 36-37
TIRES, WHEELS AND HUBS 38-39
GEARBOX BREAKDOWN 40-41
OPTIONAL MUD BRUSH AND AUGER DRIVE KIT 42-43
OPTIONAL TWIN-ROD CLEANING CHAINS 44-47
OPTIONAL TWIN-ROD & BAR-CHAIN PICK-UP CHAINS 48-49
OPTIONAL PADDLE SWEEP KIT 50-51
OPTIONAL POWER PAK KIT 52-55
OPTIONAL LUNETTE EYE AND TOW HITCH KIT 56-57
OPTIONAL HERBST CART KIT 58-59
HYDRAULIC SCHEMATIC 60-70
ELECTRICAL SCHEMATIC 71-75
Click on a section to jump to that page
4
Back To The Table Of Contents
REF.
NO. PART NO. DESCRIPTION QTY.
1A PN6019 PIN-hitch 1
1B PN3005 PIN-hair (5/32”)(included with PN6019) 1
2A 12687 PIN-hitch 1
2B PN3005 PIN-hair (5/32”)(included with 12687) 1
3 F69198 ADAPTER-hitch 1
4 12695 PIN-lift 2
5 12623 PIN-linch 2
6 DS2021 DRIVESHAFT-pto (complete) 1
7 YK2011 YOKE 2
8 CK5010 CROSS KIT-yoke 2
9 YK2012 YOKE-inboard 1
10 SH1011 CONE-shield 2
11 087276 RING-bearing 2
12 SH2017 SHIELD-outer 1
13 SH2016 SHIELD-inner 1
14 YK2013 YOKE-inboard 1
15 PN1012 PIN-yoke 2
16 DS8014 PROFILE-inner 1
17 DS9014 PROFILE-outer 1
18 044321 CHAIN-safety 1
19 L69305 BRACKET-hitch mount upper 1
20 L69315 BRACKET-hitch mount lower 1
H25PB001 FLORY INDUSTRIES, INC.
MODEL 850-860 HARVESTER
5
Back To The Table Of Contents
6
Back To The Table Of Contents
REF.
NO. PART NO. DESCRIPTION QTY.
1 F5012 SHAFT-pickup belt (upper) (s/n ~1633) 1
F5012-R SHAFT-rubberized pickup belt (upper) (s/n 1634~) 1
NOTE: F5012 is replaced by F5012-R
2 PBC2108 BEARING-pickup belt shaft (upper) 2
3 F61348 PAD-bearing take up 2
4 F10728 REDI BOLT-bearing take up 2
5 L66010 ARM-torque (inc. 2 of L13015 bushings for s/n ~1246) 1
L66010 (s/n ~1709) Replaced by L30505
6 L67400 MOUNT-pickup belt motor 1
7A HM1149 MOTOR-p/u belt (Eaton) (s/n ~1246) (may use HM2149) 1
HM2149 MOTOR-p/u belt (Danfoss) (s/n 1247~1794) 1
HM3149 MOTOR-p/u belt (Danfoss) (s/n 1795~) 1
7B HM1149-K SEAL KIT-motor (HM1149) 1
HM2149-K SEAL KIT-motor (HM2149) 1
HM3149K SEAL KIT-motor (HM3149) 1
8 F4012 BELT-pickup (complete) 1
F4024 BELT-pickup (without teeth and flaps) 1
9 F3024 TEETH-pickup belt 11
10 F3036 FLAP-pickup belt 11
11 F6036 CLAMPSTRIP-pickup belt 11
12 F6024 CLAMPSTRIP-pickup belt 2
13 F61258 TROUGH-dirt (upper Rt)(s/n ~1633) Replaced by F61268 1
14A F61268 TROUGH-dirt (lower right) (s/n ~1633) 1
14B F61268 TROUGH-dirt (upper & lower right) (s/n 1634-1794) 1
F61468 TROUGH-dirt (upper & lower right) (s/n 1795~) 1
15 F60608 GUIDE-pickup belt (right) (s/n ~1794) 1
F60718 GUIDE-pickup belt (1/4" thick) (right) (s/n 1795~) 1
16 F61278 TROUGH-dirt (upper Lt)(s/n ~1633) Replaced by F61288 1
17A F61288 TROUGH-dirt (lower left) (s/n ~1633) 1
17B F61288 TROUGH-dirt (upper & lower left) (s/n 1634-1794) 1
F61488 TROUGH-dirt (upper & lower left) (s/n 1795~) 1
18 F60488 GUIDE-pickup belt (left) (s/n ~1794) 1
F60738 GUIDE-pickup belt (1/4" thick) (left) (s/n 1795~) 1
19 F50248 SHAFT-pickup belt (lower) (s/n ~1794) 1
F59258 SHAFT-pickup belt (lower) (s/n 1795~) 1
20 PBC2103 BEARING-pickup belt (lower) (s/n ~1794) 2
PBC2108 BEARING-pickup belt (lower) (s/n 1795~) 2
21 F1048 REDI BOLT-bearing take up 2
22 50JA12 SPROCKET-rotary trap (drive) (s/n ~1794) 1
50BTL16H SPROCKET-rotary trap (drive) (s/n 1795~) 1
H25PB003 FLORY INDUSTRIES, INC.
MODEL 850-860 HARVESTER
7
Back To The Table Of Contents
8
Back To The Table Of Contents
REF.
NO. PART NO. DESCRIPTION QTY.
23 JA103 BUSHING-sprocket (s/n ~1794) 1
1610108 BUSHING-sprocket (s/n 1795~) 1
24 AG2416 IDLER-sprocket 2
25 50BS48100 SPROCKET-rotary trap (driven) 1
26 FLC2100 BEARING-rotary trap 2
27 F6084 WEARSTRIP-pickup belt (lower right) (s/n ~1794) 1
F60748 WEARSTRIP-pickup belt (lower right) (s/n 1795~2026) 1
L60746 WEARSTRIP-pickup belt (lower right) (s/n 2027~) 1
28 F6072 WEARSTRIP-pickup belt (lower left) (s/n ~1794) 1
F60768 WEARSTRIP-pickup belt (lower left) (s/n 1795~2026) 1
L60766 WEARSTRIP-pickup belt (lower left) (s/n 2027~) 1
29 F5072 SHAFT-rotary trap 1
30 L30480 FLAP-rotary trap 4
31 F6096 CLAMPSTRIP-rotary trap flap 4
32 F6120 DEFLECTOR-rotary trap (right) 1
33 F6108 DEFLECTOR-rotary trap (left) 1
34 K6288 WEAR STRIP-side plate (right) (s/n ~2026) 1
L62880 WEAR STRIP-side plate
(right) (pec./wal.) (s/n ~2026)
1
35 K6276 WEAR STRIP-side plate (left) 1
L62760 WEAR STRIP-side plate (left) (pecans/walnuts) 1
36 L30120 CURTAIN-windrow (almonds & walnuts) 1
37 F6012 CLAMPSTRIP-windrow curtain 1
38 L30130 CURTAIN-windrow (pecans) 1
39 K6171 BRACKET-wing (right)(almonds / walnuts / hazelnuts) 1
40 K6172 BRACKET-wing (left)(almonds / walnuts / hazelnuts) 1
41 K3173 SEAL-wing (almonds / walnuts / hazelnuts) 2
42 L13015 BUSHING-torque arm (s/n 1247~1709) 2
43 F11338 BRACKET-bearing take up 1
44 L22100 SHIELD-rotary trap drive 1
45 CP9118 COUPLER-motor to shaft (s/n ~1794) 1
CP9125 COUPLER-motor to shaft (s/n 1795~) 1
46 L30485 FLAP-rotary pickup (s/n 1664-1986) 4
47 L30505 ARM-torque (rubber)(s/n 1720~) Requires Qty 2 1
L14015 when replacing L66010
48 L14015 WASHER-clamp (steel) 2
49 F14238 SPACER-bearing (s/n 1795~) 2
50 L69915 CLAMPSTRIP-windrow curtain (pecan) 1
51 MC1011 CAP-shaft end 1
52 L22006 SHIELD-shaft end 1
53 L62968 WEAR STRIP-side plate (right) (s/n 2027~) 1
54 L62988 WEAR STRIP-side plate (left) (s/n 2027~) 1
H25PB003
FLORY INDUSTRIES, INC.
MODEL 850-860 HARVESTER
9
Back To The Table Of Contents
10
Back To The Table Of Contents
Table of contents
