FLIR 614004898 User manual
ThermoVision™ Sentinel
Operator’s manual
1 557 544Publ. No.
a121Revision
English (EN)Language
October 6, 2005Issue date
ThermoVision™
Sentinel
Operator’s manual
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
Legal disclaimer
All products manufactured by FLIR Systems are warranted against defective materials and workmanship for a period of one (1) year from the
delivery date of the original purchase, provided such products have been under normal storage, use and service, and in accordance with
FLIR Systems instruction.
All products not manufactured by FLIR Systems included in systems delivered by FLIR Systems to the original purchaser carry the warranty,
if any, of the particular supplier only and FLIR Systems has no responsibility whatsoever for such products.
The warranty extends only to the original purchaser and is not transferable. It is not applicable to any product which has been subjected to
misuse, neglect, accident or abnormal conditions of operation. Expendable parts are excluded from the warranty.
In the case of a defect in a product covered by this warranty the product must not be further used in order to prevent additional damage. The
purchaser shall promptly report any defect to FLIR Systems or this warranty will not apply.
FLIR Systems will, at its option, repair or replace any such defective product free of charge if, upon inspection, it proves to be defective in
material or workmanship and provided that it is returned to FLIR Systems within the said one-year period.
FLIR Systems has no other obligation or liability for defects than those set forth above.
No other warranty is expressed or implied. FLIR Systems specifically disclaims the implied warranties of merchantability and fitness for a
particular purpose.
FLIR Systems shall not be liable for any direct, indirect, special, incidental or consequential loss or damage, whether based on contract, tort
or any other legal theory.
Copyright
© FLIR Systems, 2005. All rights reserved worldwide. No parts of the software including source code may be reproduced, transmitted, transcribed
or translated into any language or computer language in any form or by any means, electronic, magnetic, optical, manual or otherwise,
without the prior written permission of FLIR Systems.
This manual must not, in whole or part, be copied, photocopied, reproduced, translated or transmitted to any electronic medium or machine
readable form without prior consent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries.
All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective
owners.
Quality assurance
The Quality Management System under which these products are developed and manufactured has been certified in accordance with the
ISO 9001 standard.
FLIR Systems is committed to a policy of continuous development; therefore we reserve the right to make changes and improvements on
any of the products described in this manual without prior notice.
Patents
This product is protected by patents, design patents, patents pending, or design patents pending.
Contact details
FLIR Systems AB Imaging Sweden ■ P. O. Box 3 ■ SE-182 11 Danderyd ■ SwedenPostal address
+46 (0)8 753 25 00Telephone
+46 (0)8 731 05 30Telefax
www.flir.com/imagingWeb site
imagingsweden.sales@flir.seE-mail
➲ For contact details for regional offices, see the back cover of this manual.
iv Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
Table of contents
11 System description .........................................................................................................................
22 Packing list ......................................................................................................................................
33 Connecting system components ..................................................................................................
33.1 Important notes ....................................................................................................................
43.2 Connection overviews ..........................................................................................................
43.2.1 Imager ...................................................................................................................
63.2.2 Power Box (PB) .....................................................................................................
84 Typical system overview ................................................................................................................
95 Mechanical installation ..................................................................................................................
106 Remote Control (RC) ......................................................................................................................
117 Display symbology .........................................................................................................................
117.1 General information ..............................................................................................................
127.2 System display & symbols ...................................................................................................
127.2.1 System display ......................................................................................................
137.2.2 In-depth explanations of symbols ........................................................................
137.2.2.1 NFOV (narrow field-of-view) reticle ...................................................
137.2.2.2 Crosshair reticle ................................................................................
137.2.2.3 Image polarity ....................................................................................
137.2.2.4 System date ......................................................................................
137.2.2.5 System time .......................................................................................
137.2.2.6 Focus position indicator ....................................................................
137.2.2.7 Active channel indicator ....................................................................
137.2.2.8 Additional indicators not shown in the illustration ............................
147.2.2.9 Declutter function ..............................................................................
158Operation .........................................................................................................................................
158.1 Checking the system by using the Remote Control (RC) ....................................................
158.2 On-screen menus .................................................................................................................
158.2.1 General information ..............................................................................................
168.2.2 Autofocus ..............................................................................................................
178.2.3 Image menu ..........................................................................................................
178.2.3.1 When IR is selected ...........................................................................
188.2.3.2 When TV is selected ..........................................................................
198.2.4 Setup menu ...........................................................................................................
208.2.4.1 Image ................................................................................................
218.2.4.2 Symbology ........................................................................................
238.2.4.3 Local adapt ........................................................................................
248.2.4.4 Date & Time .......................................................................................
258.2.4.5 Maintenance ......................................................................................
278.2.4.6 System info ........................................................................................
289 Adverse weather conditions ..........................................................................................................
289.1 Built-in heaters ......................................................................................................................
289.2 Precautions under cold weather conditions ........................................................................
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005 v
2910 Maintenance & cleaning ................................................................................................................
2910.1 Camera body, cables & accessories ....................................................................................
2910.2 Lenses ...................................................................................................................................
3011 Technical support ...........................................................................................................................
3112 Technical specifications .................................................................................................................
3112.1 System specifications ...........................................................................................................
3212.2 Thermal imager specifications .............................................................................................
3312.3 Video camera specifications ................................................................................................
3412.4 List of relevant documents ...................................................................................................
3512.5 Diagnostic tools ....................................................................................................................
3512.5.1 General ..................................................................................................................
3612.6 Troubleshooting guide .........................................................................................................
3712.7 Overview & location of connectors ......................................................................................
3712.7.1 Connectors on Power Box (PB) ............................................................................
3812.7.2 Connectors on imager unit ...................................................................................
3912.8 Pin configuration ...................................................................................................................
3912.8.1 Connectors on Power Box (PB) ............................................................................
3912.8.1.1 J4 – 23-pin connector .......................................................................
4012.8.1.2 J5 – Connector for host computer & remote control ........................
4012.8.1.3 J6 – BNC connector ..........................................................................
4012.8.1.4 J7 – BNC connector ..........................................................................
4012.8.2 Connectors on imager unit ...................................................................................
4012.8.2.1 J1 – 23-pin connector .......................................................................
4212.8.2.2 J3 – Internal service connector .........................................................
4312.9 Basic dimensions – Imager; view from above .....................................................................
4412.10 Basic dimensions – Imager; rear view .................................................................................
4512.11 Basic dimensions – Imager; front view ................................................................................
4612.12 Basic dimensions – Imager; side view .................................................................................
4712.13 Basic dimensions – Imager; view from below ......................................................................
4812.14 Basic dimensions – Remote Control (RC) ...........................................................................
4912.15 Basic dimensions – Power Box (PB) ....................................................................................
5012.16 Basic dimensions – Power Box (PB) ....................................................................................
5113 History of infrared technology ......................................................................................................
5614 Theory of thermal imaging ............................................................................................................
5614.1 Introduction ...........................................................................................................................
5614.2 The electromagnetic spectrum ............................................................................................
5714.3 Blackbody radiation ..............................................................................................................
5814.3.1 Planck’s law ..........................................................................................................
5914.3.2 Wien’s displacement law ......................................................................................
6114.3.3 Stefan-Boltzmann's law .........................................................................................
6114.3.4 Non-blackbody emitters .......................................................................................
6414.4 Infrared semi-transparent materials .....................................................................................
65Index ................................................................................................................................................
vi Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
1 System description
The ThermoVision™ Sentinel from FLIR Systems is a high performance thermal
imaging system that incorporates the latest in uncooled detector technology. The
ThermoVision™ Sentinel contains a 320 × 240 uncooled microbolometer focal plane
detector array.
The ThermoVision™ Sentinel features a dual field-of-view (WFOV = 20° × 15°, NFOV
= 5° × 3.75°) for wide area surveillance, and close-up inspections. Electronic zoom
as well as autofocus are included for enhanced target recognition, along with freeze
frame capabilities, and various image enhancement functions.
The system also features a side-mounted 1/4" color CCD video camera with autofocus
and 12x electronic zoom / 18x optical zoom, allowing the operator to toggle between
IR imaging and video imaging.
The ThermoVision™ Sentinel can be configured for stand-alone operation, or it can
be fully configured into a comprehensive surface surveillance network. This makes
it an ideal solution for a wide variety of applications including perimeter surveillance,
border surveillance, and force protection.
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005 1
2 Packing list
The ThermoVision™ Sentinel and its accessories are normally delivered in a hard
transport case which typically contains the items below.
On receipt, inspect all items and check them against the delivery note. Any damaged
items must be reported to the local FLIR Systems representative immediately.
Qty.Part NumberDescription
1614004898ThermoVision™ Sentinel
11 557 544Operator’s manual
1■194 796 (15 m / 50 ft.)
■194 797 (61 m / 200 ft.)
■System cable, 15 m / 50 ft. or
■System cable, 61 m / 200 ft.
11 195 413Power Box (PB)
11 195 367Remote Control (RC)
1908 929Video cable
11 909 824Transport Case
1PP_614004898ATR ThermoVision™ Sentinel
1Certificate of Conformity
2Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
3Connecting system components
3.1 Important notes
Please note the following:
■Always disconnect the system from the mains supply before connecting or discon-
necting any cables.
■The connectors should be sealed with the protective caps when not in use.
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005 3
3.2 Connection overviews
3.2.1 Imager
10597403;a1
Figure 3.1 Main system connector
Figure 3.2 Explanations of callouts
ExplanationCallout
■Cable designation: System cable
■Part Number: 194 796 (15 m / 49 ft.) or 194 797 (61 m / 200 ft.)
■Function: Connecting from Power Box (PB) to J1 connector on imager
■Pin configuration on receptacle connector: See section 12.8.2.1 – J1 – 23-
pin connector on page 40
SEE ALSO: For an example in a typical system overview, see section 4 – Typical
system overview on page 8
1
4Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
3.2 – Connection overviews
Table of contents
Other FLIR Thermal Camera manuals
FLIR
FLIR SR-Series User manual
FLIR
FLIR T Series Parts list manual
FLIR
FLIR A500f Series User manual
FLIR
FLIR E series User manual
FLIR
FLIR ETS320 User manual
FLIR
FLIR InfraCAM User manual
FLIR
FLIR FLIR H Series User manual
FLIR
FLIR T8 Series User manual
FLIR
FLIR FLIR TG167 User manual
FLIR
FLIR A400 Series User manual
