Firesense 1337 Technical reference manual

- 1-

PatioHeater

Model: PH09-S/ PH09-SS

Item #: 01338, 01337, 01347, 60789, 60790

FOR YOUR SAFETY

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. If odor continues, immediately

call gas supplier.

PLEASE retain this manual for

reference.

FOR YOUR SAFETY

Do not store or use gasoline or

other flammable vapors or liquids

in the vicinity of this or any other

liance.

Instruction Manual & Parts List

INSTALLER: Please leave this manual for the consumer.

CONSUMER: Please retain this manual for future reference.

Manufacturer: Changzhou Wellife Furnace Co., Ltd.

WARNING: For outdoor use only.

- 2-

DANGER CARBON MONOXIDE HAZARD

This appliance can produce carbon monoxide

which has no odor.

Using it in an enclosed space can kill you.

Never use this appliance in an enclosed space

such as a camper, tent, car or home.

WARNING:

For Outdoor Use Only

LPG cylinders to be used must be constructed and

marked in according with US DOT specifications

Storage indoors is permissible only if the LPG

cylinder is removed.

NOTE:

Use only 20lb LP-Gas tank with size of

18.1in / 46cm(Height)*12.5in / 32cm (Width).

Do not use if the environment temperature is

below 40°F / 4.4°C.

WARNING: Improper installation, adjustment,

alteration, service or maintenance can cause injury

or property damage. Read the installation,

operating and maintenance instructions thoroughly

before installing or servicing this equipment.

Tools needed:

●Open end wrench 10&12mm

(included)

NOT included:

●Adjustable opening wrench 8’’

long

●Slip joint 9’’ long

●Philips screwdriver w/ medium

blade

●Spray bottle of soapy solution

for leaking test

TOOLS AND PARTS NEEDED FOR ASSEMBLY

- 3-

NOTE: PLEASE READ THE FOLLOWING SAFETY RULES

WARNING:

PRECAUTIONS

This heater must only be used outdoors. Using this product in an enclosed

area may cause injury, death or property damage.

Only use in a well-ventilated space. Do not use in a building, garage, or any

other enclosed area.

Read the instructions before use. This heater must be installed in

accordance

with local codes or, in the absences of local codes, with the National Fuel

Code, ANSI Z223.1. If applicable, the appliance, when installed, must be

electrically grounded in accordance with local codes or, in the absence of

local codes, with The National Electrical Code, ANSI/NFPA70.

Do not use the heater in an explosive atmosphere. Keep the heater away

from areas where gasoline or other flammable liquids or vapors are stored.

Prior to use, check for damaged parts such as hoses, regulators, pilot or

burner.

Turn off and disconnect LPG cylinder before moving the heater.

Do not attempt to alter this heater in any manner. EXAMPLE: Using the

heater without the mesh guard or radiant screen.

Do not use the heater in basements or below ground level. It must always

be placed on a solid and level surface.

Always ensure there is ample fresh air ventilation. This heater if for

OUTDOOR use ONLY.

Never replace or substitute the regulator with any regulator other than the

factory suggested replacement.

Do not clean the heater with cleaners that are combustible or corrosive.

Do not paint radiant screen, control panel or mesh guard.

All leak tests should be done with a soapy solution. NEVER USE AN OPEN

FLAME TO CHECK FOR LEAKS.

The LPG cylinder should be turned off when the heater is not in use.

At least once a year, the heater should be inspected for the presence of

spiders, spider webs or other insects.

- 4-

CHECK THE HEATER IMMEDIATELY IF ANY OF THE FOLLOWING EXIST:

The smell of gas in conjunction with extreme yellow colored tips of the burner

flames.

2. The heater does not reach temperature.

3. The burner makes a popping noise during use (a slight popping noise is

normal when the burner is extinguished after using).

Children and adults should be aware of the hazards of high surface

temperature, and should stay away to avoid burns or clothing ignition.

Young children should be carefully supervised when they are in the area of the

heater.

Clothing or other flammable material should not be hung from the heater, or

placed on or near the heater.

Any guard or other protective device removed for servicing the heater must be

replaced prior to operating the heater.

Installation and repair should be done by a qualified service person. The

heater should be inspected before use and cleaning may be required at least

once a year, or as necessary. It is imperative that the control compartment,

burner, and circulating passageways of the heater be kept clean.

Keep the heater area clear of combustible materials such as gasoline and other

flammable vapors and liquids.

Do not obstruct the flow of combustion and air ventilation. Keep the ventilation

opening of the cylinder enclosure free and clear of debris.

Storage of the heater indoors is permissible only if the LPG cylinder is turned off,

disconnected, and removed from the heater.

Cylinders must be stored outdoors in a well-ventilated area out of the reach of

children. Disconnected cylinders must have threaded valve plugs tightly installed,

and must not be stored in a building, garage, or any other enclosed area.

。

PRECAUTIONS

-5 -

PARTS LIST

1. Burner assembly

2. 4 pcs mesh guard

3. Handle with 2 pcs M6 nuts

and 2 pcs flat gaskets

4. Back panel

5. 5 pcs M4x10mm bolts, 5 pcs

M4 flat gaskets, and 5 pcs M4

nuts to connect the burner

assembly with back panel

6. Regulator with gas hose

7. Door panel

9. Wheels with 2 pcs M8x16mm

bolts and 2 pcs M8 nuts

10. 6 pcs M6x12mm bolts and

6 pcs M6 nuts for connection

of 3 cylinder brackets with

base and 3pcs M8x25mm

bolts for securing the LPG

cylinder

11. Base

ASSEMBLY

10 pcs M5x12mm bolts and

10pcs M5 nuts for connection

of 5 brackets with back

panel,5pcs M8x16mm bolts

to connect the back panel

with base

- 6-

WARNING: This appliance requires installation by a competent person.

Proper assembly is the responsibility of the installer.

Step 1

Step 2

Attach the handle to the back

panel with 2 pcs M6 nuts and

2 pcs flat gasket.

Use 6 pcs M6x12mm bolts and

6 pcs M6 nuts to connect 3

cylinder brackets on the base.

The brackets will allow LPG

cylinder to rest securely on

base.

ASSEMBLY

Use 10 pcs M5x12mm bolts and 10pcs

M5 nuts to connect 5 brackets with

back panel, Attach the back panel on

the base with 5 pcs M8x16mm bolts.

-7 -

Step 3

Step 4

Attach the burner assembly to

back panel with 5 pcs M4x10mm

bolts, 5 pcs M4 flat gaskets, and

5 pcs M4 nuts.

ASSEMBLY

- 8-

Step 5

Attach the door panel to the

back panel.

Step 6

Attach the regulator to the burner

assembly (see picture to the right) and tighten.

Attach the regulator to the LPG cylinder (see below).

Warning: Always make sure to check the connection for

leaks before using the heater (see page 10).

ASSEMBLY

- 9-

Step 7

Attach mesh guards (4 pcs)

to burner assembly as shown

(see picture to right).

ASSEMBLY

- 10 -

To check for leaks:

Your patio heater has been checked at all factory connections for leaks, but you

should always check when you attach the LPG cylinder. To check for leaks, follow

these instructions:

--Assemble all gas connections.

--Connect regulator assembly to the propane tank.

--Make sure the heater valve is turned OFF.

1) Make soapy solution by mixing 1 part liquid dish soap and 3 parts water.

2) Open the propane tank valve.

3) Spoon several drops (or use squirt bottle) of the soapy solution onto the gas

hose /regulator and regulator/cylinder connection.

4) Inspect the connections and look for bubbles.

5) If no bubbles appear the connection is safe.

6) If bubbles appear, there is leakage. Close the propane tank valve, and

loosen and re-tighten this connection.

7) Check for leakage again.

8) If bubbles still appear, close the propane tank valve and contact your gas

supplier. If a leak is detected, DO NOT attempt to use the heater.

MAKE SURE TO CHECK ALL THREE CONNECTIONS BETWEEN THE LPG

CYLINDER AND GAS LINE.

ASSEMBLY AND OPERATION

This manual suits for next models

Table of contents

Other Firesense Patio Heater manuals

Firesense

Firesense 60688 User manual

Firesense

Firesense 60402 User manual

Firesense

Firesense FireSense 60485 User manual

Firesense

Firesense Mojave Sun IR 60253 User manual

Firesense

Firesense FireSense 60368 User manual

Firesense

Firesense LIP-10A-TGG/60951 User manual

Firesense

Firesense FireSense 60368 User manual

Firesense

Firesense 60803 User manual

Firesense

Firesense SP01 User manual

Firesense

Firesense FireSense PH08-S User manual

Firesense

Firesense 60469 User manual

Firesense

Firesense Patio Heater User manual

Firesense

Firesense 62216 User manual

Firesense

Firesense 61445 User manual

Firesense

Firesense 1031510 Quickspecs

Firesense

Firesense 60404 User manual

Firesense

Firesense FireSense 60696 User manual

Firesense

Firesense FireSense 60697 User manual

Firesense

Firesense 63073 User manual

Firesense

Firesense KLD7001S User manual

Firesense

Firesense DLX 46K User manual

Firesense

Firesense 63057 Quickspecs

Firesense

Firesense PH08-SB User manual

Firesense

Firesense 60405 User manual

Popular Patio Heater manuals by other brands

empasa

empasa HMXD-E-NHS operating instructions

Sunred

Sunred Indus manual

HEAT1

HEAT1 ECO pro-line 2300W instructions

Heatmaxx

Heatmaxx SRPH98 instruction manual

Sunjoy

Sunjoy A30600640 manual

Event Furniture

Event Furniture 16091 Operating & safety guide

Prem-I-Air

Prem-I-Air EH1462 manual

Blumfeldt

Blumfeldt 10028637 manual

Sunjoy

Sunjoy L-PH011PSS-2 owner's manual

Melissa

Melissa 670-202 user guide

Quality Heating

Quality Heating THE-12DW manual

DCS

DCS PHFS-P4 Use and care and installation guide

EUROM

EUROM 334241 instruction manual

Lava Heat

Lava Heat Venetian owner's manual

EHS Ltd.

EHS Ltd. HQH-2000W instruction manual

VONROC

VONROC ALICUDI PH515AC Original instructions

OZONA

OZONA Heatflow IF010997 Safety instructions and operation manual

theBBQshop

theBBQshop 51611010 Safety, Installation, Operation and Maintenance