9
2 - Safety and equipment
2.1 - Safety warnings
Please read this document carefully before installing and starting up the product.
The installation and start-up phases of the device must be carried out exclusively by qualified personnel, able to identify
hazards and act safely.
The phases of maintenance, repair or subsequent repositioning must also be carried out only by qualified personnel:
there are no components that can be repaired by the user or maintained independently.
The product must not be operated by children or persons not considered able to assess the installation-related risks.
Pets and non-domestic animals must be kept away from the appliance.
Total or partial non-compliance with the indications contained in this document can lead to serious or fatal injuries.
The qualified installer must always ensure that the installation takes place in accordance with the local regulations in
force at the time of installation.
2.2 - Compliant use
The device requires grounding by a dedicated equipotential cable, to be connected in the grounding terminal inside the
device.
In any case, before installation, it is necessary to verify that the power supply system is fully compliant with the state of
the art and provided by qualified personnel in accordance with local and international regulations in force.
It is only safe to use the device if it is used as intended.
Different uses and unauthorized modifications to the appliance or any of its components are therefore impermissible
and are thus considered non-compliant.
The device is designed to be connected and to communicate information and data via a network interface. Users are
solely responsible for consistently providing and ensuring a secure connection between the product and their data
network or any other network (as applicable). Users should establish and maintain all appropriate measures (such as,
but not limited to, installing firewalls, applying authentication measures, encrypting data, installing anti-virus programs,
etc.) to protect the product, the network, their system and interface against any type of security breach, unauthorized
access, interference, intrusion, loss or theft of data or information. FIMER and its affiliates are not liable for damages or
losses related to such security breaches, any unauthorized access, interference, intrusion, leakage or theft of data or
information. The data, examples and diagrams in this manual are included only with the aim of describing the product
and should not be considered as a guaranteed declaration of ownership. All persons responsible for installing the
equipment indicated in this manual must ensure that each intended installation is suitable and acceptable, including
compliance with any applicable safety or other operational requirements. In particular, any risk in applications where a
system or product failure would create a risk of damage to property or persons (including but not limited to personal
injury or death) will be the sole responsibility of the person or entity installing the equipment; those responsible are
encouraged to ensure that all measures are taken to exclude or mitigate such risks.
This document has been carefully checked by FIMER but deviations cannot be completely ruled out. If errors are
detected, the reader is kindly requested to notify FIMER. Other than under explicit contractual commitments, in no event
shall FIMER be responsible or liable for any loss or damage resulting from the use of this manual or from the installation
of the equipment.
2
