Beam Angle
Lens Diameter
Mounting
Tilt Angle
Control
Mini USB Interface
Housing Colors
IP Rating
LED Lifetime
Certifications
42,000 hours
IP20
Black
For firmware upgrades
130mm / 5 inch
54° (without Accessories)
DMX, 512 Addresses, XLR5, RJ45
+/- 90°
Baby Stud 5/8" Female (16mm) and Junior Stud 1-1/8" Male (28mm)
CE, UL, FCC
Size (without Barndoor)
Weight (Includes Yoke)
LED
Thermal Design
CCT Range
CRI
Power Consumption
Power Connection
Input Voltage
Operating Temperature 32-104ºF / 0-40º C (Over Temperature Protection)
Dense Matrix LED
2800-6500K Continuous Tuning
≥93 (3000-5600K)
185W Max
Detachable PowerCon Cable
AC Power: 100-240 VAC, 50~60Hz, Max 185W
Advanced Vapor Cooling
12 lbs / 5.5 kg
305mm X 325mm x 380mm (With yok)
6
Specifications
For Your Safety
•CAUTION! High Beam Intensity! - Do not look into the Light Source (5) of the fixture.
• Do NOT point the light at combustable or flammable materials.
• Do NOT attempt to disassemble the body of Q500. Doing so will void the warranty.
• Do NOT install Q500 in a damp or wet area.
• Do NOT cover/block the side and back air vents.
• Use only the included power supply. Failure to do so may cause damage to the light.
• Use only a soft, dry towel to gently clean the exterior of the light.
• Do NOT lift or suspend the light by the power cable.
• Do NOT use the Q500 or accessories if they display any physical damage.
• Before first use, make sure to remove all protective membranes.
• Do NOT use the gel holder designed for the P series of lights with the Q500.
• Do NOT mount the Q500 in a hanging position without a separate safety cable.
A safety cable is NOT included with the Q500.
27°-49° (with 5” Fresnel Lens) | 11°-23° (with 8” Fresnel Lens, Not Included)
