Fifine K669B User manual
K669B
User Manual • Uživatelský manuál • Užívateľský manuál •
Használati utasítás • Benutzerhandbuch
2
Content • Obsah • Tartalom • Inhalt
English
3 – 12
Čeština
13 – 22
Slovenčina
23 – 32
Magyar
33 – 42
Deutsch
43 – 52
Importer • Dovozce • Dovozca • Importőr • Importeur
Alza.cz a.s.
Jankovcova 1522/53
Prague 7
www.alza.cz
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
What’s in the Box?
1× USB Microphone with 180cm USB cable
1× Metal Tripod Stand
1× User Manual
Specifications
Power Supply
5V
Polar Pattern
Uni-directional
Frequency Response
20 Hz – 20 kHz
Sensitivity
-34 dB ± 30 % (at 1 kHz)
Load Impedance
1000 Ω
Equivalent Noise Level
16 dB-A
Max. SPL
130 dB (at 1 kHz ≤1 % T.H.D)
S/N Ratio
78 dB
Electrical Current
3 mA
4
Introduction
Keep the volume all the way down when plugging the mic into the USB port and
gradually turn volume up for the perfect effect during the use.
Volume Control
Volume up
Clockwise (turn right)
Volume down
Counter clockwise (turn left)
Mute
Counter clockwise (turn maximum left)
The front of the microphone should be facing the sound source (a VOLUME icon
indicates the front of the microphone). No matter how you adjust the angle or position
of the mic, make sure the front of the mic is pointing at your mouth in order to achieve
the best pick-up effect.
5
Stand Installation and Adjustment
1. If necessary, adjust the microphone’s
angle with the pivot mount’s thumbscrew.
Turn left for loosening, turn right for
tightening.
2. Swing the microphone counter
clockwise. Swinging the microphone
clockwise will break the bracket.
3. Screw the pivot to adjust microphone angle 360° horizontally.
6
MacOS Setup
1. Plug the free end of the provided USB cable into the USB port of your computer.
Your computer will automatically recognize the USB device and install a driver.
2. To select the K669 as your audio input, first open your System Preferences.
3. Next, click Sound to display the Sound preference panel.
4. Click the Input tab and select the “USB PnP Audio Device” as the device for sound
input.
Note: If you want to monitor your voice when using MacBook, you must turn on any
recording software first (e.g. Audacity). Make sure to click “Software Playthrough (ON)”,
then click the Record button to begin, otherwise you cannot hear any sound when you
speak to the mic.
If the computer is not able to identify this USB device, please restart computer and
re-plug the mic into another USB port.
7
Windows Setup
Please wait for a few seconds when you use the device for the first time, since driver of
the microphone takes time to automatically install. There may be no pop-up window or
message though. If you plug the microphone in a different USB port, the driver installs
again.
1. Right-click the speaker icon at the bottom right of the screen. Click “Sounds”.
2. Confirm the loudspeaker is open.
Click the loudspeaker that is being used, then navigate through
“Properties” →“Levels”, drag progress bar to adjust volume of output.
8
3. Select the Recording tab and choose “USB PnP Audio Device” as the default
device. When you speak to mic, bar-type icon will turn green and bounce. If it
remains unchanged, please restart the computer and re-plug the device. If there’s
still no “USB PnP Audio Device”, please contact our customer service.
If you want to monitor your recording, click Microphone
“Realtek High Definition Audio” →“Properties” →“Listen”,
check “Listen to this device” and hit “Apply”. No sound can be heard through
earphone or speaker if you don’t follow this procedure.
Note: Uncheck “Listen to this device” when you’re using any recording software
or chatting software (e.g. Skype).
4. Double-click on the “USB PnP Audio Device” icon to open the Microphone
Properties window. Select the Levels tab to adjust microphone level (loudness).
9
Troubleshooting
Applicable both for Mac and Windows systems.
1. If computer prompts that it’s unable to identify USB devices, please restart
computer and re-plug the microphone into other USB port.
2. If the microphone is recognized but no sound comes out, please check whether
System Sound is mute and whether you have turned volume control on
microphone to minimum.
3. If the microphone is recognized but no sound comes out and your computer runs
Windows 10, please go to “Settings” “Privacy” “Microphone” and check the “Allow
apps to access the microphone”. Then restart your computer.
Recording Software Settings
Make sure you have the correct input/output selected. Also make sure to uncheck
“Listen to this device” in your computer system when you are using any recording
software, or else you would hear a duet of yourself.
Note: Quit Audacity (or other recording software) if you find USB microphone
unavailable and then plug in the microphone first, secondly start the software again.
Input: USB PnP Audio Device
Output
: Choose whatever device you need
10
Important Notice
Setting Your Software Levels
Correct adjustment of microphone level is important for the optimal performance.
Ideally the microphone level should be as high as possible without overloading the input
of your computer.
If you hear distortion or if your recording program shows levels that are consistently
overloaded (at peak levels), turn the microphone volume (or level) down, either through
your control panel (or system preferences) settings, or through your recording software.
If your recording program shows insufficient level, you can increase the microphone
gain either from the control panel (or system preferences) settings or through your
recording program.
Selecting Software
You have many choices in recording software. Audacity (available for free online at
www.audacity.sourceforge.net) is a widely used software program that provides basic
recording software.
Note: The microphone must be plugged in first and then the recording software is to be
opened.
Positioning Your Microphone
It is important to position the microphone directly in line (or axis) with the person
speaking/singing or other source of sound in order to achieve the best frequency
response of the microphone. For use in speaking/singing applications, the ideal
placement for the microphone is directly in front of the person speaking/singing.
Protecting Your Microphone
Avoid leaving your microphone in the open air or in areas where temperatures exceed
43 °C for extended periods. Extremely high humidity should also be avoided.
Other manuals for K669B
1
Table of contents
Languages:
Other Fifine Microphone manuals
Fifine
Fifine K658 User manual
Fifine
Fifine K669B User manual
Fifine
Fifine T683 User manual
Fifine
Fifine K025 User manual
Fifine
Fifine K651 User manual
Fifine
Fifine K726 User manual
Fifine
Fifine K670 User manual
Fifine
Fifine K669 User manual
Fifine
Fifine AMPLIGAME A8 PLUS User manual
Fifine
Fifine K720 User manual
