Fermax VIDEO DIGITAL COLOR KIT User manual

Pag 24

Congratulations for buying a quality product. FERMAX

ELECTRONICA S.A.E. manufactures and sells its well known

prestigious equipment, designed to the most technologic and

aesthetic requirements. The components of this KIT have been

winner, and developed by FERMAX ELECTRÓNICA S.A.E.

We hope you will have many years of service from it.

If you wish further information about FERMAX, or make

any sugestion, contact us in the web (http:\\www.fermax.es).

ENGLISH

Pag 25

VIDEO DIGITAL COLOR KIT manual

INDEX

INTRODUCTION ................................................................................................ 26

THE CITYMAX COLOUR MONITOR ................................................................. 27

THE OUTDOOR PANEL .................................................................................... 27

MONITOR INSTALLATION ................................................................................ 28

OUTDOOR PANEL INSTALLATION .................................................................. 29

POWER SUPPLY INSTALLATION..................................................................... 31

OUTDOOR PANEL SETUP ................................................................................ 32

MONITOR CONFIGURATION ............................................................................ 32

OPERATION ....................................................................................................... 33

INSTALLATION DIAGRAMS .............................................................................. 34

KIT EXPANSIONS .............................................................................................. 37

How to add terminals ............................................................................. 38

How to add an Outdoor Panel ............................................................... 39

ACCESORIES..................................................................................................... 40

Extension call .......................................................................................... 41

Stair light Relay ....................................................................................... 41

Second door control ............................................................................... 42

Connection to TV set .............................................................................. 42

TROUBLESHOOTING HINTS ........................................................................... 43

TABLE OF SECTIONS ....................................................................................... 43

OUTDOOR PANELS INTERNAL WIRING ......................................................... 44

Pag 26

INTRODUCTION

The VIDEO DIGITAL COLOR KIT is an advanced Video Door Entry

professional system for simplified installation (no call wires), specially designed

to be installed in bungalows or small residential complexes. It is basically made

up of an Outdoor Panel, which is installed outside the house, and a Color

Monitor, installed inside. Moreover, the corresponding Power Supply must be

installed in an inner place.

VERY IMPORTANT NOTES:

The Power Supply should be installed on a hard

and flat surface, as inside the buiding as in the lobby,

etc... but always in inner places. It can be installed in

a DIN box for electric switches.

Before installing the VIDEO DIGITAL COLOR KIT,

install the cables needed to Monitor (or monitors),

Outdoor Panel and Power Supply, following the

installation diagram.

To install the Monitor, choose a hard and flat

surface, far away from direct heat sources (radiators,

heaters, ...) or very smoky environments (kitchens,

etc.). We advise to install the Monitor in a place

where the call could be heard all inside the house.

The Outdoor Panel is protected against humidity

and atmosferical agents. In adverse conditions with

permanently hard rain or salty environment, it is

recommended to install the Panel with a hood or under

shelter. Strong light coming straight into the camera

(against the light) will produce contrast and/or

brightness losses.

Pag 27

VIDEO DIGITAL COLOR KIT manual

FLAT MONITOR

HIGH RESOLUTION

COLOR CAMERA

Only in installations withAUXILIARY COLOR CAMERA

KIT or ADDITIONAL COLOR VIDEO PANEL (optional).

THE CITYMAX MONITOR

THE OUTDOOR PANEL

AMPLIFIER

mesh

Terminals for

CONNECTION

DOOR RELEASE

push button

2nd CAMERA

connection

BRIGHTNESS

control

COLOR

control

ON/OFF

switch

AUTO SWITCH-ON

push button

STAIRS LIGHT

push button

COLOR

CAMERA

module

CALL

Push buttons

CONFIGURATION

jumpers

Volume for

MONITOR

Volume for

OUTDOOR PANEL

PUSHBUTTON

connector

Pag 28

3.Once the wires are connected, plug in

the connector and place the Monitor as

shown above: 1 - 2 - 3 .

90º

FLAT MONITOR

HIGH RESOLUTION

FLAT MONITOR

HIGH RESOLUTION

4.To unhook the Monitor, insert the screw-

driver in the notch , turn it a few degrees

and slide up the Monitor.

Once the equipment is fully installed, the Monitor will need to be programmed

in order to assign it a call pushbutton. Follow the set up sequence shown in

page 32.

90º

1.60m

FROM THE

FLOOR

1.Use a plain screw-driver to separate the

base from the Monitor. Put it in, rotate

and slide the Monitor up.

2.Install the Monitor on a hard and flat

surface. Mark and drill the wall at the

holes in the base.

MONITOR INSTALLATION

The CityMax monitors allow a quick and easy installation, without neccesity

of doing any kind of building-work. Do not remove the screen protection film

until the Monitor is completely installed.

Pag 29

VIDEO DIGITAL COLOR KIT manual

1.7m

1.Before embedding the box, break the

flange where the cables will be passed

through.

2.Place the embedding box at the desired

height (1.7m aprox.). Make sure that the

box is totally flush with the wall.

OUTDOOR PANEL INSTALLATION

Follow the recommendations shown in this chapter to install the Outdoor

Panel correctly. Do not forget to remove the protective plastic film in the front

of the camera once the installation is finished.

3.Place the waterproof tapes supplied with

the KIT.

4.Use the hinges to connect the wires and

handle the Panel comfortably.

Pag 30

+18V 1.5A

50-60 H. 50VA MAX.

12V 1A

FUENTE ALIMENTACION

KIT DIGITAL

MADE IN SPAIN

+18V 1.5A

50-60 H. 50VA MAX.

12V 1A

FUENTE ALIMENTACION

KIT DIGITAL

MADE IN SPAIN

POWER SUPPLY INSTALLATION

Finally, the Power Supply must be placed in a place dry and safe from the

weather. Its DIN 6 format allows you to install it in any type box or directly on

the wall by using the wallplugs and screws supplied.

1.Drill 2 holes in the wall, place the

wallplugs and fasten the screws, fixing

the Power Supply to the wall.

2.The Power Supply can be fitted on a

DIN rail inside a box pressing it as shown

in figure.

MARIA

LORCA

HIGH RESOLUTION

COLOUR TELECAMERA

6.Close the Panel and fasten the screws

with the allen key supplied. Place the

covers to finish the installation.

5.Push up the houvre behind nameplate

the louvre and place the label. You can

use the labels supplied with the Outdoor

Panel.

Pag 31

VIDEO DIGITAL COLOR KIT manual

+18V 1.5A

50-60 H. 50VA MAX.

12V 1A

FUENTE ALIMENTACION

KIT DIGITAL

MADE IN SPAIN

FUENTE ALIMENTACION

KIT DIGITAL

220 - 240 V

MADE IN SPAIN

+ - +

3.The Power Supply can be unmounted

from the DIN rail by levering at the flange

with a flat screw-driver.

NOTE:

The Power Supply must be installed in a place dry and safe from

inclemency of weather. It is advisable to install it protected through a

thermo-magnetic circuit breaker at the main input.

4.Plug-in the wires in the corresponding

terminals following the installation

diagrams attached.

ING

* The jumper JP1 must be always

connected, except when having 2

Outdoor Panels, in which case the

jumper in one of them will be removed

(secondary).

* Select the language of the door open

message by means of JP2: english

(ING), french (FRA), spanish (ESP) and

german (ALE).

OUTDOOR PANEL SET UP

The Outdoor Panel must be set up depending on the type of installation,

using the jumpers in the rear side of the amplifier.

ESP

FRA

ALE

JP2

JP1

Pag 32

OPERATION

Once the VIDEO DIGITAL COLOR KIT has been installed, it is advisable to

check all its features.

Call

* When pressing the call pushbutton in the Outdoor Panel it produces an

electronic sound in the Monitor, which is activated to show the visitor in

the screen. The image must be clear, day and night, because of the

camera's lighting. You can watch the visitors without letting them know if

the apartment is inhabited.

MONITOR CONFIGURATION

Before programming, the system must be fully wired, the handset on hook

and the Monitor connected as shown below.

HIGH RESOLUTION

COLOUR TELECAMERA

PRG

1.Put the jumper J1 to the

PRG position. A

confirmation sound will

be heard.

2.Press the button which

will identify the Monitor.

Once again confirmation

is generated.

3.Put back the jumper

back to its original

position and hang up the

Monitor.

Time between steps 1 and 2 must not be longer than 2 minutes. In case this

would occur, put back the jumper to its original position and restart the sequence.

Pag 33

VIDEO DIGITAL COLOR KIT manual

NOTE:

* For normal use of the Monitor, the switch must be in the ON

position. When the Monitor is not going to be used for a long time,

switch off the monitor using this switch.

* In installations with additional terminals (monitors and/or telephones),

the call activates all the terminals (call tone and video). When picking

up one of the handsets the communication channel with the Outdoor

Panel is opened, and the rest of terminals are blocked. From the blocked

monitors, the only function available will be the auto switch-on

* The spoken message when releasing the lock is selectable from 4

different languages (see page 31). If it is not needed, the message may

be cancelled.

* Picking up the handset you can hold a conversation with the visitor up to

a maximum of 90 seconds, or until you hang up the handset.

* Pressing the button you will release the door lock, giving access to

the visitor. When the door opening is produced, a spoken message can

be heard: "The door is opened. Please, close the door behind you.".

Reconnect a call

* At any time, you can re-stablish communication with the Outdoor Panel

by pressing

and picking up the handset.

Auto switch-on

* You can also activate the Monitor at will by pressing the auto switch-on

, obtaining the image from the Outdoor Panel. This feature allows

you to control the area covered by the camera whenever you need

(vigilance and watching functions). The Monitor will switch-off

automatically after 30 seconds.

If the system does not work correctly check out the chapter TROUBLE

SHOOTING HINTS in page 43 of this manual.

Table of contents

Other Fermax Intercom System manuals

Fermax

Fermax Cityline Owner's manual

Fermax

Fermax LOFT BUS2 User manual

Fermax

Fermax 1 LINE MARINE VIDEO KIT Instruction Manual

Fermax

Fermax SKYLINE 4+N KIT User guide

Fermax

Fermax VDS BASIC iLOFT TELEPHONE User manual

Fermax

Fermax 1102 User manual

Fermax

Fermax MARINE DDA 1-LINE ENTRYPHONE KIT User manual

Fermax

Fermax 9002 User manual

Fermax

Fermax VEO DUOX User guide

Fermax

Fermax LOFT 4+N User manual

Fermax

Fermax DUOX User guide

Fermax

Fermax MEMOPHONE 100C User manual

Fermax

Fermax LOFT BUS2 User manual

Fermax

Fermax Way-Fi User guide

Fermax

Fermax HALO User manual

Fermax

Fermax SKYLINE Series User guide

Fermax

Fermax 970114h User manual

Fermax

Fermax Lynx Series User guide

Fermax

Fermax DUOX plus 970050b User guide

Fermax

Fermax DUOX User guide

Fermax

Fermax MILO 1W PANELS User guide

Fermax

Fermax 6870 User manual

Fermax

Fermax WAY KIT with PROXIMITY Instruction Manual

Fermax

Fermax CITY LINE User manual

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual