Femometer XN/MD-2267R User manual
XN/MD-2267R
ELECTRIC
BREAST PUMP
HANDS FREE, BREASTFEEDING WITH EASE.
femometer
My dear,
This is a very special stage in your life. Maybe
you will experience the pain of breastfeeding,
lack of sleep, lack of freedom, more
pressure, etc., but you will also gain a lot,
such as your little baby's sweet smile,
surprises of growth, and unforgettable
memories. You have to believe you are great.
This is a wearable electric breast pump
designed specifically for you to make
breastfeeding more comfortable. I hope it
can accompany you through this unforgetta-
ble and special life journey easily.
01
Table of Contents
Product
Description
3
Intended
Use
5
Safety
7
Using Wearable
Pump
16
Technical
Specifications
22
Trouble
Shooting
23
Contains
24
Getting
Started
8
PAGE NAME| PAGE NAME|
02
1. PRODUCT DESCRIPTION
1.1 PARTS
03
02
01
0807
04
05
06
11
10
01
02
03
04
05
06
Breast Shield(25mm)
Diaphragm
Pump Motor
Valve
Bottle Connector
180ml Bottle
Tritan
SIL
/
SIL
PP
Tritan
........
.......................
......................
..................................
...............
.......................
07
08
09
10
11
22mm flange
18mm flange
Type-C Charging Cable
Bra Adjuster
Bottle Lid
SIL
SIL
/
/
PP
.....................
....................
....
......................
............................
09
* Spare part: valve
03
NOTE:
This product has a built-in li-ion battery. When the Battery Indicator light flashes during the
working process, we recommend that you use a certified 5V 1A Power Adapter to charge
the device as soon as possible.
1. PRODUCT DESCRIPTION
1.2 CONTROLS
Level Indicator
Battery Indicator
Vacuum Down
Massage Mode
Suction Mode
Traction Mode
Vacuum Up
On/off, mode switch
Simulation mode ( The icon of Massage Mode and Suction Mode will light up at
the same time . )
04
2. INTENDED USE
2.1 INDICATIONS FOR USE
Powered breast pump, to express and collect milk from lactating women, to alleviate
engorgement of the breast, maintain the ability of lactation, and provide mother’s milk for future
feedings when separation of mother and baby occurs. The device is intended for a single user.
2.2 OPERATING LIFE
The operating life of the Device is defined to be not less than 500 hours.
The expected operating life of the replaceable washable components is three-six months.
It also depends on how frequently the parts are used and washed.
It’s recommended to replace the washable components after long-term storage or before
pumping for your next child.
05
3. SAFETY
3.1 WARNINGS
This is a single-user product, use by more than one personal may present a health risk and
voids the warranty.
It’s recommended you consult with a licensed healthcare professional before using this
wearable pump if you have an active implanted device that would be affected by a
magnetic field (e.g. pacemaker, implantable cardioverter defibrillator).
Inspect for damage, clean and sterilize washable components that come into contact with
your breast and breast milk prior to first use.
Clean all parts that come into contact with your breast and breast milk, and inspect for
damage after every use.
During normal use, area of the wearable pump may warm up. If your pumping environment
is at the upper operating temperature limit (+30°C / +86°F) for the maximum session time (30
minutes), the temperature of the Cushion may reach up to +45°C / + 113°F.
Do not store wet or damp parts, as mold may develop.
Do not immerse the Pump Motor in water or other liquids. Wipe with a clean, damp cloth.
This product contains small parts and a cable that may present a hazard. Keep out of reach
of children.
Only use the manufactured parts with this wearable pump, including the charging cable, do
not substitute.
It’s recommended to use an adaptor compatible with both IEC60601-1 and your regional
power source.
06
Always inspect all parts before use for damage or cleanliness.
Always ensure all parts are completely dry before assembling.
Do not place the Pump Motor in the fridge or freezer.
This wearable pump and its components are not heat-resistant. Keep away from heat
sources.
Do not use flammable materials while using this wearable pump or connecting this
wearable pump to a charger.
Do not use this wearable pump while sleeping or overly drowsy.
Using a breast pump should not cause pain. Do not try to express with an intensity setting
that is too high or uncomfortable. If excessive discomfort or pain is felt during pumping,
stop pumping, break the Breast Shield around your nipple and discontinue the session.
Contact your healthcare professional if you express minimal or no milk, or if expression is
painful.
For assistance with correct Breast Shield sizing and comfort, pls see section 4.3 or talk to a
lactation consultant or breastfeeding specialist .
Extra care is necessary when using this wearable pump in the vicinity of children.
This wearable pump should not be used while lying down, or engaging in strenuous
exercise or activities with risk of harm.
Always break the cushion around your nipple before removing this wearable pump from
your breast.
Do not expose this wearable pump or components to direct sunlight.
3. SAFETY
3.2 PRECAUTIONS
07
4.GETTING STARTED
4.1 CLEANING AND STERILIZING
For the first time and after each use, you must disassemble, wash and sterilize all the
breast pump parts that come into contact with breast milk.
Disassemble and clean the parts come into contact with breasts and breast milk
immediately after use to avoid residual breast milk that may cause bacteria to grow.
Take care when cleaning the breast shield and diaphragm and valve, if it gets damaged,
your breast pump will not function properly.
Never wash or sterilize the pump motor, this component does not come into contact
with your breast milk. You can wipe this part clean with a soft cloth.
The Pump Motor contains electronics that should be kept dry. A clean, damp cloth can be
used to clean the Pump Motor. Any other cleaning method will be classed as misuse under
the warranty.
Do not get wet!
08
Table of contents
