Fein AWBP 10 Setup guide

AWBP 10

Repair instructions

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 35

AWBP 10

Contents

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 2of 35

1. Models described

2. Technical data

3. Notes and requirements

4. Tools required

5. Lubricants and auxiliary substances required

6. Removal

7. Fitting

8. Troubleshooting

9. Connection diagram

AWBP 10

1. Models described

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 3of 35

These repair instructions describe how to repair the following models:

Model Order number

AWBP 10 7 105 04 00 94 0

AWBP 10

2. Technical data

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 4of 35

Technical data

All the technical data can be found in the operating instructions for the model.

Test data

Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service →Repair Guides).

Lubricants

The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service →Repair Guides).

Lists of spare parts

Lists of spare parts and exploded views are available online at www.fein.com

AWBP 10

3. Notes and requirements

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 5of 35

Please note

These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and

electrical training.

Only use original FEIN spare parts.

Provisions

Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in

serious risks to the user.

The provisions set out in DIN VDE 0701-0702 should be observed after repairs.

The relevant accident prevention regulations of the employer’s liability insurance associations are to be observed when

commissioning.

The German Equipment and Product Safety Act [ProdSG] applies for correct use.

Outside Germany, the regulations applicable in the relevant country must be observed.

AWBP 10

4. Tools required

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 6of 35

Standard tools Special tools

Extraction tool Drawing-off socket cap 6 41 04 150 00 8

Drill chuck key Chuck cone, dia. 16 mm 6 41 07 016 00 1

Arbor press Chuck cone, dia. 19 mm 6 41 07 019 00 7

Punch Dia. 4 mm; Dia. 5 mm Chuck cone, dia. 22 mm 6 41 07 022 00 0

Sleeve Inner dia. 16 mm

Inner dia. ~20 mm Chuck cone, dia. 26 mm 6 41 07 026 00 0

Inner dia. 12 mm

Inner dia. ~16 mm

Inner dia. 10 mm

Inner dia. 26 mm

Inner dia. 11 mm

Inner dia. 26 mm

Inner dia. 9 mm

Inner dia. 22 mm

Inner dia. 12 mm

Inner dia. 15 mm

Inner dia. 16 mm

Inner dia. ~25 mm

AWBP 10

4. Tools required

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 7of 35

Standard tools

Sleeve

Inner dia. 5 mm

Inner dia. ~15 mm

Inner dia. 13 mm

Inner dia. 25 mm

Inner dia. 16 mm

Inner dia. ~20 mm

Hex key 6 mm

Plastic hammer

Circlip pliers

Torx T15; T20

Cylinder head screw M8x60

AWBP 10

5. Lubricants and auxiliary substances required

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 8of 35

Lubricants

Grease 0 40 101 0100 4 25 g Housing

AWBP 10

6. Removal

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 9of 35

Removing the battery and key-type drill chuck

1. Press the catch (1) and pull the battery off the tool.

2. Remove the key-type drill chuck (2). Tools:

- 6 mm hex key

- M8x60 cylinder head

screw

- Drill chuck key

AWBP 10

6. Removal

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 10 of 35

Removing the motor housing

1. Unscrew the three screws (1).

2. Remove the gearbox housing (2).

3. Unscrew the seven screws (3).

4. Open the upper part of the motor housing (4).

Tools:

- Torx T20; T15

Table of contents

Popular Power Tools manuals by other brands

AEG

AEG OMNI-JS Original instructions

SIP

SIP 01533 manual

Ribimex

Ribimex PRS499 quick start guide

3M Fiber Optic Connector Crimp Tool instructions

Ryobi

Ryobi P524 Operator's manual

ROJEK

ROJEK FSN 300A manual

Kemper

Kemper 1740PRO manual

WABCO

WABCO OptiTire installation manual

EINHELL

EINHELL TE-MS 18/210 Li Original operating instructions

Orgapack

Orgapack OR-T 85 Operating and safety instructions

TOUGHCUT

TOUGHCUT Diamond 400 instruction manual

Yaros

Yaros PB-3603 user manual

Baileigh Industrial

Baileigh Industrial SS-2725 Operator's manual

Milwaukee

Milwaukee 2674-20 Operator's manual

Princess

Princess Electric Multi Sharpener user manual

FOREDOM

FOREDOM K.1050 Operation & maintenance manual

Blaupunkt

Blaupunkt TIF 30 DA manual

Silca

Silca MARKER 2000 operating manual