Feider Machines FAP1630 User manual
WATER AND DUST VACUUM CLEANER
Reference: FAP1630
Operating instructions
IMPORTANT ─Please carefully read this manual to understand the whole of the machine before use.To
reduce the risk of injury, user must read instruction manual.
BUILDER SAS
ZI – 32, rue Aristide Bergès, 31270 Cugnaux, France
MADE IN PRC
01
Table of Contents
Considerations relating tosafe use….…….……….…….…….….….….………………………3
Warning.…….…….…….…….…….…….…….……….…….…….…..…….……….….….……4
Product instructions.…….…….…….…….…….…….…….…….…….…..…….……...….……5
Technical data…….…….…….…….…….…….…….….………….….….….……….…….……6
List of contents.…….…….…….…….…….…….…….……….…….….….…….………….……6
Electrical diagram…….…….…….……….…….…….….…….…….….….…….…….…………6
Main components.…….…….…….………….…….……..…...….…….….….…….……....……7
Operating instructions…….…….…….…….…….…….…..…….…….………..……....…….…8
Maintenance…….…….…….……….…….…….….….….…..……….…….……..……..……..11
Diagnosis of common faults.…….…….…….…….…….……….…….…….….….…….……..12
Exploded view of the product and spare parts list…….…….…….….…………....….…..………13
CE Declaration of Conformity.…….…….……….…….…….….…….…….….…...….…….…16
WARRANTY…….…….……….…….…….….…….……..….…….….……….….….……....…17
PRODUCT FAILURE…….…….……….…….…….….….….……….…….….….….……....…18
WARRANTY EXCLUSIONS…….…….……….…….…….….…….…….….….…...…...….…19
02
General safety instructions for machine preparation,
operation and maintenance are provided in this manual.
The use should comply with the instructions. Otherwise,
in case of an accident, the manufacturer shall not be
held responsible.
Considerations relating to safe use
1. Do not use in areas containing inflammable liquids or
gases, or in areas protected against explosion, and
protected against fire.
2. Turn the switch Off and unplug before cleaning or
repairing to prevent fire hazard.
3. Be careful because the hose and body can be
charged with static electricity.
4. Do not step on the hose, pull on the hose when it is
rolled up; if the hose is damaged, do not use it again; do
not place heavy or sharp objects on the hose; do not
use a high-pressure cleaner.
5. Do not let the power cord get stuck in a door, or use
the wire to pull the vacuum cleaner, protect the power
cord.
6. Be careful of your own safety during use, keep away
from suction or moving parts.
7. Do not place the entire machine in water, do not
touch the plug with wet hands or a wet towel to avoid
electric shock.
8. The supply voltage must correspond to that of the
device, do not use it with a voltage different from the
rated voltage of the device.
03
9. Before suctioning water, remove the dust bag, filters
and use a sponge filter.
10. Clean the tank if it contains a lot of dust.
Warning
1. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
2. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
3. The plug must be removed from the socket-outlet
before cleaning or maintaining the appliance.
4. Do not suck glass, iron and other sharp debris into
the hose and body as this may damage the hose, filters,
etc.
5. Do not suck hot, flammable, caustic or explosive
substances to avoid the risk of fire and electric shock.
6. The suction of hair, paper, cement, chalk, putty
powder, sticky substances can easily block the vacuum
cleaner, and this could cause a fire; sucking these
substances is not advisable;
7. Do not use for an extended period of time when the
04
air inlet is blocked, otherwise it can damage the vacuum
cleaner.
8. Stop when an abnormal sound is emitted; check and
clean.
9. Do not let children play with the vacuum cleaner
accessories to avoid accidents.
10. If the electrical power is high, use a separate
electrical panel to prevent fire.
11. Remove the plug from the power outlet when the
appliance is not in use; monitor the device when it is in
use.
12. Do not place the vacuum cleaner or power cord
close to any heat sources to avoid fire.
13. Do not use the power cord or power plug if one of
them is damaged, a professional should perform repairs;
Product instructions
The vacuum cleaner has been designed to look nice, it
is robust and has many functions; it is equipped with a
double ventilation duct, an integrated dust bag, a three-
level HEPA filtration system, and it can recover very fine
dust.
The front is equipped with swivel wheels and the rear
with large unidirectional wheels; easy to move; various
accessories can be used for different functions; Efficient
motors for both fans, higher suction, longer service life.
It's the best material for cleaning in hotels, factories and
other places.
05
•
Technical data
Rated voltage: 220-240V~
Rated frequency: 50/60Hz
Rated power: 1600,3600 W with max load of socket-outlet
Insulation class.:Class I
Suction: ≥ 18 kPa
Suction effectiveness: ≥ 20%
•
List of contents
•
Electrical diagram
Name
Amount
Vacuum cleaner
1
Flexible hose
1
Telescopic tube
1
Floor brush
1
Round brush
1
Small tip
1
Manuals
1
06
•
Main components (indicated in the illustration above)
n.
Name
n.
Name
1
Floor brush
8
Front suction
2
Telescopic tube
9
Handle
3
Hose connector
10
Cable
4
Flexible hose
11
Fasteners
5
Top suction
12
Tank
6
Handle
13
Small tip
7
Switch
14
Round tip
07
Note:
The vacuum cleaner is equipped with a
double suction structure including front
and top suction, they can be used for
different functions.
Top suction (Fig. A)
If the hose is connected to the top suction,
you may need to install a plug on the front
suction.
Use the front suction to suck water (Fig.
B)
If the hose is connected to the front
suction, you may need to install a plug on
the top suction.
•
Operating instructions
1. On or Off (Fig. 1)
(1).
Switch on: After inserting the electrical plug into the socket,
turn the switch to position 1, the vacuum cleaner starts.
(2).
To stop: Turn the switch to 0 position, the vacuum cleaner
stops.
2. Connect the hose to the vacuum cleaner (Fig. 2)
Insertion: insert the connector into the suction mouth, and then
turn it clockwise to lock it.
Removal: turn the connector counter clockwise to disengage the
hose.
3. Connect the hose to the tube (Fig. 3)
(1). Connect the hose to the tube, turn it clockwise to secure.
(2). Hold both ends and turn counter clockwise.
4. Connecting the floor brush (Fig. 4)
(1).
Connect the brush to the tube and then turn it clockwise to
tighten.
(2).
Hold the end of the tube and the brush, then turn it counter
clockwise to disconnect.
08
5. Installation of the two swivel wheels (Fig. 5)
(1).
Remove the head and tank from the body of the vacuum
cleaner (where the wheels are located)
(2).
Tilt the vacuum cleaner, insert the swivel wheels on the front
in the holes on both sides.
6. Storage of the power cord (Fig. 6)
(1).
The cord supports are located on the back of the vacuum
cleaner; when the unit is not in use, wind the cord on the
supports.
(2).
To operate the machine, unwind the power cord.
7. Storage of accessories (Fig. 7)
The accessories can be stored with the two holes on the sides of
the machine.
8. Blowing function (Fig. 8)
(1). Insert the tube into the blowing connection
(2). Blowing connection
9. Blowing reversal function (Fig. 9)
(1). When the suction decreases, insert the hose head and press
the button.
(2). Repeat three to five times, the suction will increase.
10. Mounting of the dust bag (Fig. 10)
(1). Remove the transparent cover.
(2). Install the dust bag and reassemble the unit.
11. Replacement of the dust bag (Fig. 11)
(1). Remove the transparent cover holding the dust bag.
(2). Change the dust bag with the new.
12. Separate the tank head (Fig. 12)
(1). Open the 2 side fixings.
(2). Take the handle in hand and lift the head.
13. Replacement of the filter (Fig. 13)
(1).
Remove the cover, the filter is at the bottom, remove the
filter.
(2).
Replace the old filter with a new one, then reassemble.
09
14. Cleaning the filter (Fig. 14)
(1). Remove the filter and wash it with clean water.
(2). After cleaning, dry the filter for reuse.
15. Cleaning the connectors (Fig. 15)
(1).
Remove the connectors from the cover and clean them with
water.
(2).
Replace the connectors and secure them well.
16. Adding water (Fig. 16)
(1).
Remove the head from the body of the vacuum cleaner, add
water to the tank.
(2).
Take note of the "Water level", avoid adding too much water.
17. Speed control operation (Fig. 17) (1).
Speed control above the switch
(2). Turn the speed control to the left, the suction decreases.
Turn the speed control to the right, the suction increases.
18. Synchronous operation with a power tool (Fig. 18)
(1).
Connect the suction hose with the dust absorption port of
the power tool.
(2).
Connect the power tool plug into the synchronous
socket of the vacuum cleaner.
(3).
Turn the switch to "-" position to be in standby mode.
When the power tool is switched on, the vacuum cleaner
switches on.
10
Table of contents
Other Feider Machines Vacuum Cleaner manuals
Feider Machines
Feider Machines FHAR28 User manual
Feider Machines
Feider Machines FHAEP120015L User manual
Feider Machines
Feider Machines FVC12L User manual
Feider Machines
Feider Machines VULCANO User manual
Feider Machines
Feider Machines FHAEP1430L User manual
Feider Machines
Feider Machines ONYX User manual
Feider Machines
Feider Machines FAP1430 User manual
Feider Machines
Feider Machines FAP1440 User manual
Feider Machines
Feider Machines FHAEP1820 User manual
