FAVI Pro AV Series User manual
Model: FPM2338HT1W
• Be sure to read this manual thoroughly before installing.
• Sufficient expertise is required for installing this projector ceiling mount.
• Do not use the projector ceiling mount for other purposes than what it is designed for.
• Keep this manual available for future reference.
IMPORTANT SAFTY NOTES
1. Be sure to read this manual thoroughly before installing projector ceiling mount.
2. Only qualified technicians (two or more) should install or dismount the projector from the ceiling mount.
3. For safety reasons, check the strength of the ceiling before installation. If ceiling is not strong enough to hold ceiling mount
and projector weight, do not install until ceiling is properly reinforced for installation.
4. Ceiling mount should only be installed on a flat ceiling surface. Do not install on wall.
5. Do not install the ceiling mount to a ceiling subjected to vibration or impact.
6. To avoid fire, do not install projector with the ceiling mount in a humid or excessively dusty environment.
7. Only use the supplied accessories to assemble and install the ceiling mount. Use of accessories other than those supplied
may result in damage to the projector ceiling mount.
8. Unplug the projector power cable and all other connecting cables before dismounting the projector from the ceiling mount.
9. Do not hit or hang heavy objects on the ceiling mount other then one projector unit. If the ceiling mount is damaged, stop
use and contact a qualified technicians immediately to dismount the projector and ceiling projector.
10. Do not alter the ceiling mount. Altering ceiling mount may result in damage to the mount, cause safety hazards, and will
void any warranty.
Ceiling Mount Weight Capacity: < 55 lb.
Use with products heavier than the weight capacity may result in instability that may lead to possible injury.
Manufacturer is not liable for any damages and injury caused by mishandling or improper installation of mount.
ACCESSORIES
Setting Plate (1) Ceiling Plate Cover (1) Extended Arms (1)
NO Image Description Quantity
A Screw (M6 x 55) 5
B
Φ
10mm Anchor bolt 5
C Allen key 1
D Screw (M4 x 10) 4
E Screw (M5 x 12) 4
F M5 nuts 4
1
Mounting on concrete ceiling:
Ensure ceiling is a minimum of 4-inches in thickness.
Use anchor bolts (B) and screws (M6 x 55, A) for
installation.
Mounting on dry-ceiling:
Ensure ceiling is a minimum of 3-inches in thickness.
Use screws (M6 x 55) for installation. If the wall is
not strong enough for installation, reinforce it before
installing.
INSTALLING CEILING MOUNT
Remove the ceiling
plate cover
Wooden Stud Center Line
CAUTION:
Make sure both mounting
holes are centered to the
stud.
Loose the screws and
remove the bracket
from ceiling mount Remove the
decorative cover
Loose the screws and remove
the projector mounting plate
Φ
10 ~ 11 mm
Φ
3 mm
Use anchor bolts.
*Anchor bolts are
not necessary.
Thread power cables and other
cables through the tube.
Spare screws and actor bolts are extra.
2 in 2 in
2
INSTALLING CEILING MOUNT (Cont.)
Ensure the ceiling wall is not more than 30o. Use the screw to attach the adjustment part of the
mount to the extension tube.
ATTACHING PROJECTOR TO MOUNT
A. Using the mounting arm:
B. Not using the mounting arm.
3
Projector mounting
plate
- OR -
Mounting arm
4
ATTACHING PROJECTOR TO MOUNT (Cont.)
Move the projector mounting plate and adjust the forward/backward slide.
Connect the power cable and other cables to the projector.
ADJUST VERTICAL TILT
ADJUST HORIZONTAL ROLL
Adjust forward/
backward slide
Adjustment direction
Connect power cable and
other cables to projector.
Adjustment buttons
Adjustment direction
Adjustment buttons
Adjustment direction
5
ADJUST HORIZONTAL ROTATION
ADJUST PROJECTOR HEIGHT
PUT ON DECORATIVE COVER
PRODUCT INFORMATION
Model: FPM2338HT1W
Net weight: 6-lb
Capacity: 55-lb
Adjustable Angle: Longitudinal inclination, Level angle, Yaw angle ± 5o(3 directions)
Adjustable Range: From the installation plate center vertical distance 20-in ~ 40-in
Adjustment buttons
Locking screws
Adjustment direction
Adjustment direction
This manual suits for next models
1
Other FAVI Rack & Stand manuals
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
