Fantic Motor TF 250 2012 User manual
2
WARNING
It is recommended, after the first hours of use, to check all the torques with particular attention to:
A Front / Rear brake caliper
B Wheels axle
C Rear sprocket
D Engine bolts
E Rear suspension mounting nuts
F Wheels spokes
G Rear frame
The vehicle is equipped by catalytic exhaust (accredited Euro3) that can catch up high temperatures. Absolutely avoid the contact with body parts,
clothes inflammable materials !
WARNING
If necessary consult a FANTIC MOTOR dealer.
The technical information and specifications for maintenance contained in this handbook were correct at the time of going to press. FANTIC MOTOR
reserves the right to change the specifications, design data and necessary equipment at any time without notice. No part of this publication may be
abridged or translated without the manufacturer’s approval. FANTIC MOTOR cannot be held liable for any errors or omissions. All rights reserved.
3
This handbook is an integral part of the vehicle and must accompany it if resold.
FANTIC MOTOR reserves the right to make changes to the models described in this handbook without notice, while guaranteeing the essential features
described and shown herein.
No part of this handbook may be reproduced without the prior permission of the Manufacturer.
FANTIC MOTOR cannot be held liable for any copying or printing errors in this handbook.
GENERAL CONTENTS AND CONSULTATION
All the specifications and helpful instructions for normal use and maintenance of the vehicle are given in the handbook.
It is advisable to contact our Authorised Dealers for maintenance and any repairs, since they guarantee a prompt and precise service and always use
original spare parts.
MANUFACTURER’S DATA AND EDITION
FANTIC MOTOR
via Al Bigonzo, 15
31030 – Dosson di Casier (TV) Italy
Tel. +39 0422 634192/490636
Fax +39 0422 630491/490620
E-mail: info@fanticmotor.it
www.fanticmotor.it
Edition: 01/2012
FOREWORD
4
IMPORTANT NOTICE
Read this Manual carefully. You will nd it contains all the necessary informa-
tion for your safety, and that of other persons, as well as guaranteeing the
correct conservation and maintenance of the FANTIC MOTOR motorcycle
that you have just acquired.
You will nd all the necessary instructions for the correct riding and control
of this vehicle are set out below. Each message is preceded by a symbol with
the following meaning.
WARNING
This warning symbol identies special instructions or procedures which, if
not correctly followed, could result in personal injury or even death.
CAUTION
This symbol identies instructions or procedures which, if not followed
strictly, could result in damage to or destruction of equipment.
NOTE
This note symbol indicates points of particular interest for more ecient
and convenient operation.
Motorcycle riding, if improverly conducted, has the potential to cause envi-
ronmental problems as well as conicts with other people. Responsible riding
use of your motorcycle will ensure that these problems and conicts do not
develop.
recommends the use of lubricants and products
.
5
TABLE OF CONTENTS
Warning...................................................................................................... 2
Foreword ................................................................................................... 3
Important notice .................................................................................... 4
Table of contents.................................................................................... 5
Specications........................................................................................... 6
Location of components...................................................................... 8
Side Stand ................................................................................................. 10
Fuel .............................................................................................................. 10
Serial Number.......................................................................................... 11
Homologation Plate .............................................................................. 11
Starting the engine................................................................................ 12
Stopping the engine ............................................................................. 12
Cold starting............................................................................................. 13
Hot starting .............................................................................................. 13
Shifting gears........................................................................................... 13
Stopping the motorcycle..................................................................... 14
Riding during the Break-In Period.................................................... 14
Maintenance Schedule......................................................................... 15
Battery ........................................................................................................ 16
Cooling System ....................................................................................... 17
Spark Plug ................................................................................................. 19
Air Cleaner................................................................................................. 21
Throttle Cable .......................................................................................... 22
Clutch.......................................................................................................... 23
Exhaust System ....................................................................................... 23
Drive Chain Guide .................................................................................. 24
Handlebar ................................................................................................. 26
Brakes ......................................................................................................... 26
Steering...................................................................................................... 28
Steering blockage .................................................................................. 29
Front Fork .................................................................................................. 29
Rear suspension...................................................................................... 30
Wheels........................................................................................................ 32
Cleaning..................................................................................................... 33
Bolts and nuts tightening.................................................................... 34
Lubrication................................................................................................ 36
Engine oil................................................................................................... 37
Suspension tune-up.............................................................................. 39
Spare parts availible .............................................................................. 43
Preparation for competition............................................................... 43
Storage....................................................................................................... 44
FANTIC MOTOR Multifunction Instructions .................................. 45
Troubleshooting ..................................................................................... 51
Electric Schemas..................................................................................... 55
Warranty Manual .................................................................................... 56
Fast guide.................................................................................................. 58
Lubricants table ...................................................................................... 59
6
SPECIFICATIONS
ENGINE 4 stroke, single cylinder, DOHC 5 valves, liquid cooled
Displacement 249 cc
Bore and stroke 77 x 53,6 mm.
Fuel supply Carburatore Keihin FCR MX37
TRANSMISSION
Transmission type 5 speed
Clutch type Multi disc wet clutch
Secondary drive Chain driven
Gear ratio 1ª 2.385 (31/13)
2ª 1.750 (28/16)
3ª 1.353 (23/17)
4ª 1.095 (23/21)
5ª 0.895 (17/19)
Primary reduction 3.353 (57/17)
Final reduction 3.846 (50/13)
Overall drive ratio 11,5 (5ª gear )
Transmission oil Capacity 1.300 c.c.
Type SAE 5W40 API SG
CHASSIS
Type Cromoly steel frame
Tire size Front 90/90 x 21 (120/60 x17 motard version)
Rear 140/80 x 18 (150/60 x17 motard version
Suspension Front
ø 48 mm inverted fork with closed cartidge and shock preload regulation
Rear Progressive system with single multi-adjustment shock absorber
Suspension stroke Front 305 mm
Rear 298 mm
Front fork oil Tra SAE 5 e 7,5 (check manufacturer’s information)
Front fork oil level 320cc
7
BRAKES
Type Front, Rear Disk brakes, pump and double callipers / simple
Eective disc diameter Front 260 mm
Rear 220 mm
DIMENSIONS
Overall height 1260 mm
Overall length 2260 mm
Overall width 825 mm
Minimum height 340 mm
Wheelbase 1465 mm
Fuel tank capacity 7 litres
(Specications subject to change without notication, also possibly not applicable in some countries).
8
LOCATION OF COMPONENTS
14
5
623
1 - Clutch handle
2 - Engine start button
3 - Fuel tank cap
4 - Front brake uid tank
5 - Front brake handle
6 - Throttle control
9
7 - Exhaust bend
8 - Front suspension
9 - Radiator
10 - Fuel tank
11 - Air lter
12 - Seat
13 - Front brake disk
8 10 12
14 9 24 16 11 19 181713
20 21
15 22 22 7
14 - Front brake callipers
15 - Rear brake uid tank
16 - Shift pedal
17 - Rear shock absorber
18 - Chain guide
19 - Chain
20 - Silencer
21 - Rear shock absorber gas tank
22 - Tie rod and rocker suspension
23 - Rear brake pedal
24 - Engine oil cap
10
SIDE STAND
To set the side stand only turn it until it contacts the stopper, then the side
stand will be parallel to the ground and rest securely.
The side stand will return to its original position by means of the double
spring. The function of the double spring insures that, when the side stand is
down, the rest position is stable and above all secure; moreover, it also returns
the side stand to its original position.
(A)
(B)
(A) - Side stand.
(B) - Double spring.
NOTE
Do not start the engine or ride the motorcycle when the side stand is
down.
FUEL
The Fantic Motor TF250 has a four stroke engine and requires 98 octane, unle-
aded petrol.
Fuel Tank Capacity : 7 l
(B)
(A)
(A) - Fuel tank cap.
(B) - TVapor outlet tube.
The fuel tank cap is of the quick-release type.
To open the fuel tank cap, lift the plated latch and turn cap counter-clockwise.
To close it, turn the cap clockwise and lower the latch.
NOTE
It is recommended that the rubber seal should be checked thoroughly to
insure it is airtight.
Table of contents
Other Fantic Motor Motorcycle manuals
