Faber Duet User manual

DUET

Installation Guide

IRLU

40010731-0842

1 <<<<

UK IRL

General

1.1

1.2 1.3

1.4 1.5

30cm

>>>>2

UK IRL

Duet

2.1 2.2

2.3 2.4

2.5

3 <<<<

UK IRL

3.1

3.2 3.3

3.4 3.5

>>>>4

UK IRL

3.6 3.7

3.8 3.9

4.0 4.1

5 <<<<

UK IRL

4.2 4.3

5.1

>>>>6

UK IRL

Content

1Introduction ......................................................................................... 7

2Safety and general information .................................................................. 8

3Installation requirements ......................................................................... 9

3.1 Chimney breast............................................................................... 9

3.2 Surround with cover plate.................................................................. 9

3.3 Placing the service hatch ................................................................... 9

3.4 Flue requirements............................................................................ 9

3.5 Flue restrictor ...............................................................................10

3.6 Terminal position ...........................................................................10

3.7 Using an existing chimney. ................................................................11

4Instruction for Installation .......................................................................12

4.1 Gas Connection..............................................................................12

4.2 Electrical connection.......................................................................12

4.3 Preparation of the appliance..............................................................12

4.4 Removing the glass..........................................................................12

4.5 Placing the appliance.......................................................................13

4.6 Constructing the chimney breast.........................................................13

4.7 Placing the side glas........................................................................14

4.8 Placing the bottom plate ..................................................................14

4.9 Placing the pebbles ........................................................................14

4.10 Placing the front glass......................................................................14

5Commissioning (functional checks) .............................................................15

6Handing over (final check and customer briefing) ...........................................17

7Servicing ............................................................................................17

Appendix A: Example calculation.....................................................................19

Appendix B: Flue restrictor............................................................................20

Appendix C: Installation of the flue..................................................................21

Appendix D: Technical specifications Flatburner ..................................................22

Appendix E: Dimensions Duet R.......................................................................23

Appendix F: Dimension Duet L ........................................................................24

Appendix G: Dimensions Duet R with floorplate ...................................................25

Appendix H: Dimensions Duet L with floorplate ...................................................26

Appendix J :Dimensions Convection grid............................................................27

Appendix K : Dimensions Service hatch .............................................................28

7 < <<<

UK IRL

1Introduction

Note: these instructions should be read carefully and retained for future reference. Please

leave these instructions with the user.

The Duet is available in a left and a right version. According to commonly accepted

definitions in the Fire place business (in front view) the left version has a blinded side at

the right and a right version has a blinded side at the left. See also appendix E, F, G and H.

Before opening the crate always check if the desired version has been delivered!

Special features:

•Room sealed appliance, inlet and outlet are led to the outside using a natural

draught concentric pipe system (100 mm/150 mm) (no power fan required)

•Air supply and flue-gases go to outside atmosphere through wall or roof. A

horizontal extension is possible (see appendix A and B).

•Remote Control is standard.

•This appliance comes standard with two convection grills and one service hatch

•The appliance can be placed in two ways: standing on the floor and hanging on the

wall

•Meets the requirements of the European Gas Appliance Directive (GAD) and carries

the CE mark.

>>>>8

IRL

2Safety and general information

Before installation, ensure that the local distribution conditions (identification of the type

of gas and pressure) and the adjustment of the appliance are compatible.

This gas appliance is factory set and can not be adjusted.

This appliance does not contain any component manufactured from asbestos or any

asbestos related products.

Ventilation

This appliance is room-sealed and doesn't require purpose provided ventilation.

Never use the appliance if it has a broken glass.

General safety

It is the law in the UK that all gas appliances, are installed by a competent person in

accordance with the Gas Safety (Installation and Use) Regulations (as amended), the

relevant British Standards for Installation work, Building Regulations, Codes of Practice and

the manufacturers instructions.

Always use an additional guard if there are elderly, infirm or children in the same room of

the appliance.

The installation should also be carried out in accordance with the following where

relevant:

•BS5871 Part1

•BS5440 Parts 1 & 2

•BS1251

•Building Regulations Document J (as applicable)

•Building Regulations and Standards issued as relevant by the Department of the

Environment or the Scottish Development Department

•In the Republic of Ireland installation should be carried out in accordance with

IS813, ICP3, IS327, Building Regulations, Codes of Practice, the manufacturers

instructions and all other regulations in force

Failure to comply with the above could leave the installer liable to prosecution and

invalidate the appliance warranty.

9 < <<<

UK IRL

3Installation requirements

Note: Since the appliance is a source of heat, circulation of air occurs. Therefore it is of

importance that you do not use the appliance shortly after a renovation of the home. Due

to the natural circulation of air, moist and volatile components from paint, building

materials, carpet etc. will be attracted to the lit appliance. These components can settle

onto cold surfaces in the form of soot.

As on all heat producing appliances, soft furnishings such as blown vinyl wallpaper placed

too near the appliance may become scorched or discoloured. This should be born in mind

when installing the appliance.

3.1 Chimney breast

The appliance must be built into a chimney breast. This can be an existing or a new

chimney breast. In either case, take the following points into account:

•The chimney breast must be constructed of an inflammable material.

•Always install the hearth first before constructing the chimney breast.

•Always ventilate the space above the hearth by means of the grates supplied or a

comparable alternative with a minimum air supply of 20000 mm².

•Use special stucco (min. 100°C resistant) or glass fibre wallpaper to prevent

discoloration or tears etc. Recommended drying time:

1 day per mm finishing coat applied.

3.2 Surround with cover plate

•If the cover plate (which can be optionally ordered) is used, the chimney breast

must be placed at the same height as the bottom of the recess. (see figure 1.2).

3.3 Placing the service hatch

•The gas control valve is generally mounted onto the hearth with a brace. Unscrew it

and mount the brace with the gas control valve onto an easily accessible spot

behind the service hatch (max. 1m. from the centre of the hearth in connection

with the length of the flexible gas pipe).

3.4 Flue requirements

•The appliance is of the type C11/C31. The appliance will need to be supplied with

the approved Faber flue pipes and terminal, it is not possible to supply your own.

The minimum effective height of the flue system must be 1 meter.

•Flue routing:

•a horizontal extension with elbows is allowed for a maximum of 4 meters.

•vertical max. 12 meters (without horizontal extensions only)

Table of contents

Other Faber Indoor Fireplace manuals

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual