Ezviz S6 User manual
Quick Start Guide
CZ
RU
PL
NO
NL
DK
SW
www.ezvizlife.com
Basics
1
2
3
3
4
6
5
7
8
1
1
9
10
11
1
13
12
14
1
1Recording Status LED Indicator Steady on: Standby
Flashing: Recording
2Wi-Fi Status LED Indicator Unlit: Wi-Fi is off
Flashing: Wi-Fi is on
3MIC Microphone
4LED Indicator for Charging
5micro-HDMI Interface Connect with HDMI cable.
6microSD Card Slot Insert a microSD card for storage. The microSD card is
not included in the box. Please purchase separately (see
page6 for the recommended microSD card models).
7Type-C Interface Connect with data cable or power adapter.
8Loudspeaker
9Shutter
Start/stop recording
10 Power Button
Hold it to power on/off
11 LCD Screen LCD touch screen
12 Wi-Fi Button
Hold long to enable Wi-Fi.
13 Battery Cover Open it to access the battery.
14 Standard Bracket Interface
(1/4inch)
Interface for various brackets.
2
Display Introduction
1 micro SD Card Status 6 Battery Power
2 Live View 7 Slide downwards to set parameters
3 Tap to select camera mode 8 Tap to set more parameters
4 Tap to set resolution 9 Tap to set frame rate
5 H.265 Status
00:00:00
30FPS4K
H.265
4
1
5
6
2
3
7
9
8
3
Tap the Screen
Open/close display information.
Swipe to the Left
Choose the camera mode.
Swipe to the Right
View photos or videos, etc.
Use Gestures on Your Camera
4
Swipe Downwards
Enable Lock Screen or other settings.
Swipe Downwards in the Setting Page
Return to Live View.
5
Step 1
Operation
Insert the microSD card.
The camera supports video and picture storage in the local memory card.
MicroSD Card Capacity: > 4GB
MicroSD Card Level Requirement: Class 10 or above.
MicroSD Card Recommendation:
SANDISK EXTREME®32GB microSDHCTM
SANDISK EXTREME®64GB microSDHCTM
LEXAR®32GB microSDHCTM
LEXAR®64GB microSDHCTM
6
Step 2
Charger
Install the Battery
Hold the arrow and push the battery cover according to the arrow direction. Insert the battery
with EZVIZ logo facing upwards and close the cover.
1
Connect to Outlet
Use the power cable to connect your camera and the power outlet.
Power Cable
Power Outlet
2
For the first time use: you are recommended to fully charge the camera in the power-off
status before you use the camera
7
Power-on and Power-off
Power on
Hold down the power button and release until the startup sound plays.
Power off
Hold down the power button and release until the power-off sound plays.
DO NOT power off the camera when the camera is recording or capturing photos.
8
Voice Control
Go to Setup -> Voice Control to control the camera via your voice.
Read the following commands to control your camera.
EZVIZ start recording
EZVIZ stop recording
EZVIZ take photo
EZVIZ start burst
......
This function only works when you read the command in English.
For detailed information, please go to www.ezvizlife.com.
9
Table of contents
Other Ezviz Digital Camera manuals
