Extron electronics DTP3 T 101 D User manual

4K/60 DTP3 Transmitter for HDMI — Decorator-Style Wallplate

DTP3 T 101 D

User Guide

HDMI Extender

68-3706-01, Rev. A

01 24

Safety Instructions

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks(®), registered service marks(SM), and trademarks(TM) are the property of RGBSystems, Inc. or Extron

(see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks (®)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, eLink, Flat Field, FlexOS, Glitch Free,

GlobalConfigurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,

MediaPort, NAV, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, ShareLink, Show Me, SoundField, SpeedMount, SpeedSwitch,

StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V‑Lock, VN‑Matrix, VoiceLift, WallVault, WindoWall, XPA, XTP, XTPSystems, and

ZipClip

Registered Service Mark(SM) : S3 Service Support Solutions

Trademarks (™)

AAP, AFL (Accu‑RATEFrameLock), ADSP(Advanced Digital Sync Processing), AVEdge, CableCover, CDRS(ClassD Ripple Suppression),

Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator, DSPConfigurator,

DSVP(Digital Sync Validation Processing), EQIP, Everlast, FastBite, Flex55, FOX, FOXBOX, IP Intercom HelpDesk, MAAP, MicroDigital,

Opti‑Torque, PendantConnect, ProDSP, QS‑FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope‑Trigger, SIS, SimpleInstructionSet,

Skew‑Free, SpeedNav, Triple‑Action Switching, True4K, True8K, Vector™ 4K, WebShare, XTRA, and ZipCaddy



FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause interference. This interference must be corrected at the expense of the user.

ATTENTION:

• The Twisted Pair Extension technology works with unshielded twisted pair (UTP) or shielded

twisted pair (STP) cables; but to ensure FCC Class A and CE compliance, STP cables and STP

Connectors are required.

• La technologie extension paires torsadées fonctionne avec les câbles paires torsadées

blindées (UTP) ou non blindées (STP). Afin de s’assurer de la compatibilité entre FCC Classe A et

CE, les câbles STP et les connecteurs STP sont nécessaires.

NOTES:

• This unit was tested with shielded I/O cables on the peripheral devices. Shielded cables must be

used to ensure compliance with FCC emissions limits.

• For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility,

accessibility, and related topics, see the Extron Safety and Regulatory Compliance Guide on the

Extron website.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

CAUTION: Risk of minor personal injury.

ATTENTION : Risque de blessure mineure.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0

[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

EX! *X1&* X2)* X2#* X2! CE}

NOTE: For commands and examples of computer or device responses mentioned in this guide, the

character “0” is used for the number zero and “O” is the capital letter “o.”

Computer responses and directory paths that do not have variables are written in the font shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in italics as shown here:

ping xxx.xxx.xxx.xxx —t

SOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names are written in the font

shown here:

From the File menu, select New.

Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

xiDTP3 T 101 D • Contents

Contents

Introduction .................................................................. 1

About this Guide..................................................... 1

Product Description ................................................ 1

Features ................................................................. 1

Application Diagram ............................................... 3

Installation..................................................................... 4

Mounting the Transmitter ....................................... 4

UL and Safety Guidelines ................................... 4

Site Preparation and Wall Box Installation ......... 4

Mud Ring Installation .......................................... 6

Final Installation .................................................. 6

Front and Rear Panel Connections ........................ 7

Conntection Details ............................................. 10

TP Cable Termination/Recommendation for

DTP Communication ....................................... 10

Power Supply Wiring..........................................11

LockIt HDMI Lacing Bracket Installation ........... 12

Operation..................................................................... 13

Front Panel Indicator ............................................ 13

Operation ............................................................. 13

Resetting ........................................................... 13

HDCP ............................................................... 15

Product Configuration Software ............................... 16

Software/Firmware Installation ............................ 16

Connecting to PCS .............................................. 18

Device Discovery Panel .................................... 18

O󰀪ine Device Preview ..................................... 19

Software Overview .............................................. 20

Software Menu .................................................. 20

Device Menu .................................................... 22

SIS Configuration and Control.................................. 23

Host Control Ports ................................................ 23

Front Panel Conguration USB Port ................ 23

Simple Instruction Set Control.............................. 23

Host‑to‑Unit Instructions ................................... 23

Error Responses ............................................... 23

Timeout ............................................................. 23

Unsolicited Responses...................................... 24

Using the Command and Response Table........ 24

Symbol Denitions ............................................ 24

Command and Response Table for SIS

Commands .......................................................... 26

Reference Information ............................................... 28

Decorator‑Style Wallplate Template

Dimensions.......................................................... 28

DTP3 T 101 D • Contents xii

DTP3 T 101 D • Introduction 1

Introduction

This section gives an overview of the DTP3 T 101 D and its features. Topics include:

• About this Guide

• Product Description

• Features

• Application Diagram

About this Guide

This user guide contains installation, configuration, and operating information for the DTP3 T 101 D.

NOTE: Throughout this guide, the general term “transmitter" is used to refer to DTP3 T 101 D.

Product Description

The DTP3 T 101 D is a one‑gang decorator‑style transmitter for sending HDMI signals up to 300 feet (100 meters)

over a shielded CATx cable to an Extron DTP‑enabled product. It supports video resolution up to 4096x2160 @

60 Hz at 4:4:4 chroma sampling and complies with HDMI 2.0 and HDCP 2.3. The DTP3 T 101 D provides reliable

transmission of HDMI signals. The one‑gang wall‑mountable design of the DTP3 T 101 D offers the convenience

of placing input connections precisely where they are needed.

Features

• Transmits HDMI up to 330' (100 m) over a shielded CAT 6A cable — The DTP3 T 101 D provides high

reliability and maximum performance on an economical and easily installed cable infrastructure.

• Supports computer and video resolutions up to 4K/60 @ 4:4:4 — Support of 4K/60 at 4:4:4 color

sampling requires connection to matching DTP3 products.

• Comprehensive EDID management — Use PCS software to access EDID Minder for setting video input

EDID, capturing EDID from connected displays, or uploading custom EDID files. Proper EDID management

ensures that sources and displays are easily integrated into a system resulting in optimized system operation.

Freely downloadable EDID Manager software is available for advanced EDID editing and creating custom

EDID files.

• EDID Minder®automatically manages EDID communication between connected devices — EDID

Minder ensures that the source powers up properly and reliably outputs content for display.

• HDCP 2.3 compliant — Ensures display of content‑protected 4K video media and maintains interoperability

with earlier versions of HDCP.

• Supported HDMI 2.0b specification features include data rates up to 18 Gbps, HDR, Deep Color up to

12‑bit, 3D, HD lossless audio formats, and CEC pass‑through

• Remote power capability with DTP3 products — For simplified installation, the transmitter can be remotely

power to a connected DTP3 receiver.

• Extron XTP DTP 22 shielded twisted pair cable is strongly recommended for optimal performance

• Compatible with CAT 6A shielded twisted pair cable

• Support for HDR – High Dynamic Range Video — Enables greater contrast range and wider color gamut

by providing the necessary video bandwidth, color depth, and metadata interchange capability for HDR video.

DTP3 T 101 D • Introduction 2

• DTP3 output is compatible with HDBaseT‑enabled devices — The DTP3 output can be configured to send

video to an HDBaseT‑enabled display.

• User‑selectable HDCP authorization — Allows the unit to appear HDCP compliant or non‑HDCP compliant

to the connected source, which is beneficial if the source automatically encrypts all content when connected

to an HDCP‑compliant device. Protected material is not passed in non‑HDCP mode.

• Supports multiple embedded audio formats — The DPT3 T 101 D is compatible with a broad range of

multi‑channel audio signals, providing reliable operation with HDMI sources.

• Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous

communication between source and display.

• Output muting control — Provides the capability to mute the video or audio output at any time.

• Rear panel USB‑C configuration port — Provides convenient access for information and firmware updates.

• LED indicator for signal presence — Provides visual indication of system status for real‑time feedback and

monitoring.

• RJ‑45 signal and link LED indicators for DTP3 port — Provide a means for validating signal flow and

operation, allowing quick identification of connectivity issues.

• Easy setup and commissioning with Extron's PCS ‑ Product Configuration Software — Conveniently

configure multiple products using a single software application.

• Mounts in an included one‑gang decorator‑style wallplate — The one‑gang decorator‑style wallplate is

available in black or white to blend with a wide range of environments.

• Includes LockIt®HDMI cable lacing bracket

• External Extron Everlast™ power supply included, replacement part # (70‑1259‑01) — Provides

worldwide power compatibility with high‑demonstrated reliability and low power consumption.

• Extron Everlast Power Supply is covered by a 7‑year parts and labor warranty

Other manuals for DTP3 T 101 D

Table of contents

Other Extron electronics Transmitter manuals

Extron electronics

Extron electronics DTP T EU 4K 331 User manual

Extron electronics

Extron electronics DTP T FB 232 User manual

Extron electronics

Extron electronics ExSens User manual

Extron electronics

Extron electronics MTP T 15HD A User manual

Extron electronics

Extron electronics DTP T UWP 4K 232 D User manual

Extron electronics

Extron electronics DVI 201 A D Tx/Rx User manual

Extron electronics

Extron electronics DTP2 T/R 211 User manual

Extron electronics

Extron electronics DTP T DWP 4K D Series User manual

Extron electronics

Extron electronics XTP T UWP 202 4K User manual

Extron electronics

Extron electronics FOX T UWP 302 User manual

Extron electronics

Extron electronics FOXBOX 4G Tx User manual

Extron electronics

Extron electronics TP T 15HD AV User manual

Extron electronics

Extron electronics PowerCage MTP AV Series User manual

Extron electronics

Extron electronics XTP T HDMI User manual

Extron electronics

Extron electronics DTP T USW 333 User manual

Extron electronics

Extron electronics XTP T FB 202 User manual

Extron electronics

Extron electronics PowerCage FOX 4G Tx VGA User manual

Extron electronics

Extron electronics FOX II T HD 4K User manual

Extron electronics

Extron electronics TP Series User manual

Extron electronics

Extron electronics DTP T FB 332 User manual

Extron electronics

Extron electronics MTP 15HD A Series User manual

Extron electronics

Extron electronics FOXBOX T HD-SDI User manual

Extron electronics

Extron electronics USB Extender Plus Series User manual

Extron electronics

Extron electronics A/V Receiver MTP 4T 15HD RS User manual

Popular Transmitter manuals by other brands

NIVELCO

NIVELCO EasyTREK SCA-300 Series Programming manual

Honeywell

Honeywell 5816WMBR installation instructions

Kamstrup

Kamstrup READy MTU Installation and operation guide

Omega

Omega ZW Series user guide

ABB

ABB Field 264H Instructions for installation

Alinco

Alinco DJ-V17T Service manual

Dejero

Dejero EnGo 3x manual

Rosemount

Rosemount 4600 Reference manual

Speaka Professional

Speaka Professional 2342740 operating instructions

trubomat

trubomat GAB 1000 instruction manual

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 instructions

Rondish

Rondish UT-11 quick start guide

MG 10JRE instruction manual

Burkert

Burkert 8177 operating instructions

Firetide

Firetide HotPort 3203 Hardware installation guide

Tele Radio

Tele Radio T9-02 User instructions

Rotronic

Rotronic HygroFlex HF3 Series user guide

Jamara

Jamara FCX6 Pro Tel Instruction