Extreme Networks AP305C Installation manual
AP305C and AP305CX
Hardware User Guide
Read about and view specifications and compliance information for the AP305C and AP305CX in this topic. Install the
AP305C and AP305CX using this topic.
The AP305C and AP305CX are high-performance 802.11ax dual-5G. dual band access points.
Both are designed for indoor high-density environments that require HD video streaming and large file transfers. The AP305CX
has external antennas (sold separately), and an extended temperature range for industrial environments. These devices
support IEEE 802.11ax Orthogonal Frequency-Division Multiple Access (OFDMA) multi-user access.
For regulatory and compliance information, see "Regulatory Compliance Statements".
Important! Change the Country Code
Safety Guidelines
Safety Guidelines
Install the AP
You can mount the AP305C and AP305CX on a flat surface or wall, or on the rails of a standard dropped ceiling grid. If you
need to install your device in a non-standard ceiling, such as an Armstrong or Silhouette ceiling, you can order a separate
bracket kit. The bracket kits available for these devices are listed below.
The following sections describe how to install your AP305C and AP305CX devices and connect them to the network.
Shipping Carton Contents
Install the APon a Ceiling Track
The AP305C and AP305CX have built-in hardware that lets you easily install them on the T-rail of a standard (15"/16") dropped
ceiling grid. For standard ceiling mounts, place the built-in brackets onto the ceiling track and rotate the device until it clicks
into place. The illustration shows an AP305C but the procedure is the same for both models.
You can also install these devices on non-standard ceiling tracks or directly to a wall using accessory brackets. See
"Accessory Brackets for Non-standard Ceiling and Wall Installation"
Accessory Brackets for Non-standard Ceiling and Wall Installation
Lock the AP
Hardware Components
The hardware components of the AP305C and AP305CX are identified in the illustration below and described in the sections
that follow.
Component Descriptions
Status Light
Ethernet Port
The ETH0 port is autosensing 10/100/1000G BASE-T/TX Mbps, with IEEE 802.3af- or 802.3at-compliant PoE, and requires Cat5 or
better cable.
Micro USB Console Port
Security Slot
Both devices have a security slot for locking the device.
Extreme Networks recommends a variety of Kensington® locks. For more information, contact your sales representative.
External Antenna Connectors
The AP305CX has four male RP-SMA connectors for attaching dual-band dipole antennas. You can provide your own
antennas, or you can order them from Extreme Networks (AH-ACC-ANT-AX-KT).
The antenna kit contains four articulated 2.4/5 GHz antennas with a 3/5-dBi gain. These antennas are omnidirectional,
providing fairly equal coverage in all directions in a toroidal (doughnut-shaped) pattern. For greater coverage on a
horizontal plane, it is best to orient the antennas vertically. The articulated antennas hinge and swivel so that you can easily
do this, whether the AP is mounted horizontally or vertically.
Hardware Specifications
The following sections list radio, device, power, and environmental specifications for the AP305C and AP305CX.
Radio Specifications
Device Specifications
Antenna Gain
Antenna Plots
The antenna plots for these devices are available below. The Ethernet port location is noted on each chart.
AP305C
AP305CX
Power and Environmental Specifications
Power Specifications
Power Consumption
Environmental Specifications
Regulatory Compliance Statements
The regulatory compliance statements in this section apply to Extreme Networks AP305C and AP305CX devices.
Japan Indoor Use
Japan Equipment VCCI-B Statement
Compliance Statement - Europe
USA, Canada, and Taiwan Radio Frequency Bands
a. USA
802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz
802.11a/n/ac/ax: 5 GHz band: 5150-5250, 5725-5850 MHz
BLE: 2402-2480 MHz
b. Canada
802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz
802.11a/n/ac/ax: 5 GHz band: 5150-5250, 5725-5850 MHz
BLE: 2402-2480 MHz
c. Taiwan
802.11b/g/n/ac: 2.4 GHz band: 2412-2462 MHz
802.11a/n/ac/ax: 5 GHz band: 5180-5320, 5500-5825 MHz
BLE: 2412-2462 MHz
Max TX Power
2400-2483 - 28 dBm conducted
5150-5250 - 22 dBm conducted
5725-5850 - 22 dBm conducted
EURadio Frequency and Power Levels
EURadiation Warning Statement
Federal Communication Commission Interference Statement
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Brazil Statement
Este equipamento não tem direito à proteção contra inteferência prejudicial e não pode causar interferência em sistemas
devidamente autorizados.
Mexico Statement
La operación de este equipo está sujeta a las siguientes dos condiciones
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no
deseada.
The operation of this equipment is subject to the following two conditions:
(1) it is possible that this equipment or device does not cause disruptive interference and
(2) this equipment or device must accept any interference, including interference that may cause undesired operation).
Industry Canada Statement:
Taiwan Compliance Information
European Waste Electrical and Electronic Equipment (WEEE) Notice
In accordance with Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE):
1. The symbol above indicates that separate collection of electrical and electronic equipment is required.
2. When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted municipal waste. It
must be collected and treated separately.
3. It has been determined by the European Parliament that there are potential negative effects on the environment and
human health as a result of the presence of hazardous substances in electrical and electronic equipment.
4. It is the users’ responsibility to utilize the available collection system to ensure WEEE is properlytreated.
For information about the available collection system, please contact Extreme Environmental Compliance at
Hazardous Substances Statement and RoHS Chart
Hazardous Substances
This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June
2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Cloud Terms of Service |Evaluation Agreement |Data Privacy and Protection
Copyright © 2020Extreme Networks, Inc. 6480 Via Del Oro, San Jose CA, 95119 USA
Other manuals for AP305C
4
This manual suits for next models
1
Table of contents
Other Extreme Networks Wireless Access Point manuals
Extreme Networks
Extreme Networks WS-AP3805i User manual
Extreme Networks
Extreme Networks ExtremeMobility AP410i/e User manual
Extreme Networks
Extreme Networks AP-7522 User manual
Extreme Networks
Extreme Networks AP5050U User manual
Extreme Networks
Extreme Networks ExtremeWireless 31012 User manual
Extreme Networks
Extreme Networks AP-8533 Owner's manual
Extreme Networks
Extreme Networks AP305C User manual
Extreme Networks
Extreme Networks AP-7522 User manual
Extreme Networks
Extreme Networks AP460C User manual
Extreme Networks
Extreme Networks ExtremeWireless AP560i User manual
Extreme Networks
Extreme Networks ExtremeWireless AP510i User manual
Extreme Networks
Extreme Networks AP410C User manual
Extreme Networks
Extreme Networks Altitude 4522 Series User manual
Extreme Networks
Extreme Networks Altitude 3510 User manual
Extreme Networks
Extreme Networks ExtremeWireless AP460i User manual
Extreme Networks
Extreme Networks ExtremeWireless AP5050D User manual
Extreme Networks
Extreme Networks AP305C Installation manual
Extreme Networks
Extreme Networks ExtremeWireless AP4000 User manual
Extreme Networks
Extreme Networks Altitude 4511 Instruction sheet
Extreme Networks
Extreme Networks ExtremeWireless AP3965i User manual
