Expobar ZENITH Manual User manual
ZENITH
USER MANUAL
R
UM_EN
Part No.: 1704260_00
Date: 25/11/2014
Original Instructions
2R
ZENITH
GENERAL ................................................................................................................3
Introduction..............................................................................................................................................4
Warnings...................................................................................................................................................4
Precautions ..............................................................................................................................................5
Intended use............................................................................................................................................6
OVERVIEW OF COMPONENTS..............................................................................8
Front view ZENITH Manual and Automatic............................................................................................8
Front view ZENITH On Demand...............................................................................................................9
INSTALLATION AND START-UP .............................................................................10
Positioning ..............................................................................................................................................10
Electrical connection............................................................................................................................10
Starting the grinder................................................................................................................................10
For ZENITH Manual and Automatic....................................................................................................... 11
For ZENITH On Demand......................................................................................................................... 12
OPERATION ..........................................................................................................13
Grinder neness adjustment ................................................................................................................13
Grinder dose adjustment ZENITH Manual and Automatic.................................................................13
Ground coffee lever adjustment ZENITH Automatic ..........................................................................13
Spout orientation adjustment dispensing ZENITH On Demand .........................................................14
Filter holder fork height adjustment ZENITH On Demand ..................................................................14
CLEANING AND CARE ........................................................................................15
Maintenance of the grinder .................................................................................................................15
Daily cleaning - clean the dispensing spout ZENITH Manual and Automatic ................................15
Weekly cleaning - coffee bean container .........................................................................................16
Weekly cleaning - doser group ZENITH Manual and Automatic......................................................16
Weekly Cleaning - clean with Grindz .................................................................................................17
PROGRAMMING..................................................................................................19
Grinder setting ZENITH On Demand.....................................................................................................19
Appliance switch-on.............................................................................................................................19
Dose dispensing and setting (display) ................................................................................................19
Continuous dispensing mode activation ............................................................................................19
Resetting dose counters .......................................................................................................................20
Function block .......................................................................................................................................20
Enter service menu ...............................................................................................................................20
Factory reset .........................................................................................................................................20
DIMENSION SKETCH.............................................................................................21
ZENITH Manual .......................................................................................................................................21
ZENITH On Demand ...............................................................................................................................21
CONTENT
3
R
ZENITH
GENERAL
Important:
Alerts against unsafe practices. Observe to ensure drink quality, machine performance, food safety, to
prevent minor personal injury or damage to the machine.
WARNING!
Indicates a potentially hazardous situation which, if not avoided, could result in scalding, serious injury and
even death.
DANGER!
INDICATES A IMMINENTLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED,
WILL RESULT IN SERIOUS INJURY AND EVEN DEATH.
Note:
Gives additional information which may be helpful during the cleaning procedure or operation of the
machine.
i
R
4
ZENITH
Read the user manual before using the machine.
This guide contains important instructions for using
the grinder correctly and safely.
Always keep this manual close at hand for future
reference.
This guide must be looked after with care for the entire
working life of the coffee grinder
This guide reect the current state of the grinder
technology and shall not be considered obsolete solely
because update at a later date on the basis of acquired
experience. The manufacturer reserves the right to
makemodicationstothismanualwithnoobligationto
update previous version (except in exceptional cases).
Never touch the machine with damp or wet hands.
Never use the machine when barefoot.
Never attempt to unplug the machine by pulling the
power cord or the machine itself.
Do not use the machine outdoors so it can be exposed
to weather (rain, snow, frost). It will cause material
damage to the machine.
The appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a
person responsible for their safety.
Alwaysusetheapplianceonaat,steadysurfacethatis
able to support its weight.
Always unplug the machine from the power supply
before performing any cleaning or maintenance
operations.
Do not use water jets or non-suitable detergents for
cleaning.
In the case of machine breakdown or malfunction
switch the machine off and do not tamper with it.
For repairs contact an authorized service center and
request the use of original spare parts.
Not observing of the above precautions may make the
machine unsafe for future use.
Do not leave the machine switched on when it is not in
use. Unplug the machine when not in use.
Do not obstruct the ventilation and/or heat dissipation
openings and/or slits nor introduce water or any other
liquids into same.
Never insert spoons, forks or other utensils into the
pouring lip, or into the coffee grain container for any
reason whatsoever while the appliance is operating.
Always switch off the appliance before removing
blockages from the pouring lip.
Never immerse the machine, plug or mains cable in
water or another liquid.
.Should a foreign object stop the motor, switch the
machine off immediately and contact an authorized
service center.
Should a foreign body stop the motor, switch the
machine off immediately and contact an authorized
service center.
Introduction
Warnings
Thank you for choosing the ZENITH coffee grinder
We hope you enjoy it!
GENERAL
R5
ZENITH
Always handle the machine with care to avoid the risk
of machine failure.
The packing materials (carton, cellophane, staples,
polystyrene, etc..) can cut, wound or create hazards
if used improperly or handled carelessly. Store such
materials out of reach of children and persons with
reduced physical, sensory or mental capabilities, or lack
of experience and knowledge.
This symbol on the appliance or
package means that the appliance
must not be considered as normal
household refuse. It must be handed
over to an appropriate collection
centre for recycling of electric and
electronic appliances. Make sure
that this appliance is disposed of
correctly and you will be making
your contribution to the prevention of negative
health effects and harm to the environment. Recycling
materials helps to preserve our natural resources.
For more information about how to recycle this
product,youcancontactyourlocalcouncilofce,local
refuse disposal service or the retailer from whom you
purchased the appliance.
Before carrying out any installation or adjustment
work, make sure to read and thoroughly understand
the warnings in this manual.
The company cannot be held liable for any damage to
people or property resulting from failure to respect
the instructions concerning safety, installation and
maintenance enclosed in this manual.
If the power cord of this appliance is damaged,switch off
theapplianceandcontactaprofessionalandqualied
technician for having it replaced.
Should you decide to no longer use this appliance, we
recommend that you make it inoperative by unpluging
the appliance from the mains socket and cut off the
power cord.
All defects and/or abnormal machine behaviour shall be
reported immediately to an authorized installation and/
or maintenance technician.
Before connecting the machine,check that the electrical
powersupplycorrespondstothespecicationsonthe
data plate.
Should the machine plug not be compatible with your
socket, have the plug replaced with a suitable type
by a qualied technician, who should also check that
the power outlet is suitable for the machine power
requirements.
Avoid the use of multiple-plug adapters and extension
cords.
The ground wire must be connected; the electrical
system must meet the standards set by local safety laws
and regulations.
The machine must be installed by authorized and
qualiedpersonnel.
Check that the machine components have suffered
no damage during shipping. In the case defects or
abnormalities are found, abort the installation and
request a replacement.
Precautions
GENERAL
R
6
ZENITH
Note.
Machines with the “EL MOTORWITHTHERMAL PROTECTION” sign are equipped with a device which protects the
motor from overheating.
When this device is activated, do not attempt to operate the machine: isolate the machine from the power supply
and eliminate the cause of the problem before re-starting.
This grinder dispenser has been designed for
professional use by trained personnel.
The grinder/dispenser must be used only for the
application for which it was designed; that is, grinding
roasted coffee beans. Any other use are considered
improper and potentially dangerous.
The manufacturer shall not be held responsible for
damages deriving from improper or erroneous use of
the machine.
The appliance must not be used by children or
people with reduced, physical, sensorial or mental
abilities. It must also never be used by people without
the necessary skills and experience unless under
supervision or during training.
Do not allow children to play with this equipment at
any time.
The machine is not designed for use in environmental
conditions outside the -5 °C to +40 °C range.
The user must respect the general safety regulations in
force in the country in which the machine is installed
and shall be responsible for ensuring that periodic
machine maintenance is correctly done.
The persons installing and using the machine and doing
machine maintenance shall inform the manufacturer
of any defects or damages due to wear that might
jeopardize the original safety features of the machine.
The installer shall be responsible for checking that
the machine is installed and operated in a suitable
environmental condition thus not creating health or
safety hazards for those using the machine.
Any responsibility deriving from components
manufactured and installed on the machine shall be
assumed by the respective manufacturers;responsibility
attributable to the persons authorized to use the
machine shall be assumed by the customer.
The machine is designed for 24-hour intermittent
service. The machine components are designed and
built to ensure at least 1000 hours’ operation.
Good cleaning and maintenance also contribute to
ensure long machine life.
GENERAL
Intended use
i
7
R
ZENITH
Note:
In order to identify the appliance, read the code after “MATRICOLA” (serial number) on the label applied
on this manual or on the appliance itself and select the corresponding voltage (ex. ZENITH 65-CA 230
AA 1001/10).
i
GENERAL
DESCRIPTION
ZENITH
Manual / Automatic On Demand
EUR PLUG UK PLUG EUR PLUG UK PLUG
Grinding discs (mm) 65 65 65 65
Voltage (V) 230 240 230 240
Frequency (Hz) 50 50 50 50
Power consumption (W) 500 450 500 450
RPM
1290 1290 1290 1290
Throughput (Kg/h) 9.5 9.5 9.5 9.5
Electrical connection CEE 7/7 BS 1363/A CEE 7/7 BS 1363/A
Weight when empty (Kg) 13 13 12 12
8R
ZENITH
Front view ZENITH Manual and Automatic
OVERVIEW OF
COMPONENTS
Container lid
Coffee beans container
Grinding adjustment knob
Tab to open/close the coffee
bean container
Doser lid
Doser group
Tamper
Dispenser opening
Dose counter
Filter holder fork
Doser lever
ON/OFF switch
Coffee plate
9
R
ZENITH
Front view ZENITH On Demand
OVERVIEW OF
COMPONENTS
Container lid
Coffee beans container
Grinding adjustment knob
Tab to open/close the coffee
bean container
LCD display
Decreasing key
Luminous key for 1 coffee
dose
Dispenser opening
Luminous key for 2 coffees
doses
Increasing key
Grinding start key
Filter folder fork
ON/OFF switch
Coffee plate
R
10
ZENITH
The minimum dimensions for the place of the machine must be 360 mm wide x
415 mm depth x 620 mm high.
Positionthemachineonaatandstablesurface,awayfromwaterandsourcesof
heat.
It should be located in a dry environment, since excessive humidity will affect the
machine negatively.
Donotcoverthemachinewithplasticlmorcloths.
Only connect the machine to a grounded power supply.
Check the correct voltage and frequency on the technical data plate.
Positioning
Electrical connection
Starting the grinder
MIN. 10 cm
Note:
Make sure that air is able to circulate behind the machine (minimum 10 cm).
i
Insert the container into its seat; positioning it so
that the hole lines up with the screw on the back
part of grinder.
Tighten the lock screw.
01
02
INSTALLATION
AND START-UP
This manual suits for next models
2
Table of contents
Other Expobar Coffee Grinder manuals
