Exacq ExacqVision E Series User manual

Digital Encoder

E-Series User Manual

(updated June 29, 2014)

Information in this document is subject to change without notice.

Exacq Technologies is a trademark of Exacq Technologies, Inc. Other trademarks and trade names may be used in

this document to refer to either the entities claiming the marks and names or their products. Exacq Technologies,

Inc., disclaims any proprietary interest in trademarks and trade names other than its own.

Exacq Technologies makes no warranty of any kind with regard to this material, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose. Exacq Technologies shall not be liable

for errors contained herein or for incidental or consequential damages in connection with the furnishing,

performance, or use of this manual.

Exacq Technologies, Inc.

11955 Exit Five Parkway, Bldg 3

Fishers, IN 46037 USA

www.exacq.com

+1.317.845.5710

+44.1438.310163

USA (Corporate Headquarters)

Europe/Middle East/Asia

www.exacq.com

+1.317.845.5710

+44.1438.310163

USA (Corporate Headquarters)

Europe/Middle East/Asia

TABLE OF CONTENTS

1 Introduction................................................................................................................5

2 Encoder Overview......................................................................................................7

E-ADE1C FRONT PANEL........................................................................................................................................ 7

E-ADE4C FRONT PANEL........................................................................................................................................ 8

E-ADE1C REAR PANEL.......................................................................................................................................... 9

E-ADE4C REAR PANEL........................................................................................................................................ 10

Alarm Input Connections ..................................................................................................................................... 11

Alarm Output Connections .................................................................................................................................. 11

3 Network Parameters ................................................................................................12

Searching Online Devices.................................................................................................................................... 12

Modifying Network Parameters............................................................................................................................ 13

Restoring Default Password ................................................................................................................................ 13

4 Connecting to an exacqVision System...................................................................14

Initiating the Connection...................................................................................................................................... 14

Verifying the Connection...................................................................................................................................... 15

5 Encoder Configuration Page...................................................................................16

Installing Web Components................................................................................................................................. 16

Main Page.............................................................................................................................................................. 18

6 Live View ..................................................................................................................19

Starting Live View................................................................................................................................................. 19

Capturing a Picture............................................................................................................................................... 20

Operating PTZ Controls........................................................................................................................................ 21

Configuring Video Parameters............................................................................................................................. 24

7 Device Configuration...............................................................................................25

Local Configuration.............................................................................................................................................. 25

Configuring Time Settings................................................................................................................................... 26

8 Network Settings......................................................................................................27

Configuring TCP/IP Settings................................................................................................................................ 27

Configuring SNMP Settings ................................................................................................................................. 28

Configuring Port Settings .................................................................................................................................... 30

Configuring PPPoE Settings................................................................................................................................ 31

Configuring QoS Settings.................................................................................................................................... 32

Configuring SOCKS Settings............................................................................................................................... 33

Configuring NAT/UPnPTM Settings....................................................................................................................... 34

Configuring HTTPS Settings................................................................................................................................ 36

www.exacq.com

+1.317.845.5710

+44.1438.310163

USA (Corporate Headquarters)

Europe/Middle East/Asia

Configuring Bonjour Settings.............................................................................................................................. 38

Configuring IP Address Filter .............................................................................................................................. 39

Configuring IEEE 802.1x Settings........................................................................................................................ 40

Configuring Advanced Settings........................................................................................................................... 41

9 Camera Settings.......................................................................................................42

Configuring Display Settings............................................................................................................................... 42

Configuring Video Settings.................................................................................................................................. 44

Configuring Motion Detection.............................................................................................................................. 45

Configuring a Video Loss Alarm.......................................................................................................................... 49

Configuring a Privacy Mask................................................................................................................................. 50

Configuring Video Tampering.............................................................................................................................. 51

Configuring Text Overlay..................................................................................................................................... 52

Configuring Holiday Settings............................................................................................................................... 53

10 RS-232 and RS-485 Settings..................................................................................54

Configuring RS-232 .............................................................................................................................................. 54

Configuring RS-485 Settings................................................................................................................................ 55

11 Alarm Input/Output ................................................................................................56

Configuring the External Alarm Input.................................................................................................................. 56

Configuring the External Alarm Output............................................................................................................... 58

12 Exceptions..............................................................................................................59

13 User Management..................................................................................................60

Adding a User ....................................................................................................................................................... 61

Modifying a User................................................................................................................................................... 62

Deleting a User...................................................................................................................................................... 63

14 Log Search and Maintenance................................................................................64

Log Search............................................................................................................................................................ 64

Viewing Device Information ................................................................................................................................. 65

Maintenance.......................................................................................................................................................... 66

A Technical Support...................................................................................................68

B Regulatory Notice....................................................................................................69

C Warranty...................................................................................................................70

www.exacq.com

+1.317.845.5710

+44.1438.310163

USA (Corporate Headquarters)

Europe/Middle East/Asia

1 Introduction

exacqVision E-Series 1- and 4-channel encoders capture analog video and audio signals; encode the content using H.264,

MJPEG, and G.711 compression technologies; and transmit the data to exacqVision video servers for recording. E-Series

encoders are a cost-effective way to migrate to IP video when legacy analog CCTV equipment and infrastructure must be

used.

E-Series encoders are fully compatible with exacqVision and support configuration of motion detection, image quality,

streaming profiles, and digital inputs and outputs directly from exacqVision.

Encoding

Supports H.264 and MJPEG formats

Supports encoding video at up to 4CIF resolution

Supports dual-stream encoding.

Allows selection of compound stream encoding (with audio and video synchronization) or video stream encoding

Network

One 10M/100Mbps adaptive Ethernet interface (PoE)

Accessible by multiple web browsers, including Internet Explorer, Firefox, Chrome, and Safari

Remote web browser access by HTTPS, ensuring high security

Netfilter builds internet firewalls based on packet filtering

QoS protocol enhances the data transmission performance.

Supports SNMPv1/v2c/v3 simple network management protocol

mDNS-based Apple’s Bonjour protocol, which enables automatic discovery of devices

Zero configuration networking (Zeroconfig), which automatically obtains the IPv4 link-local IP addresses (range:

169.254.1.0~169.254.254.255).

Auto/manual port mapping by UPnP™

Discoverable by exacqVision or E-Series IP Configuration Utility

Automatically obtains IP address by DHCP protocol

RTSP/RTP standard stream media protocol, which allows user to view live by unicast

Transmission via RS-232 and RS-485 transparent channel (four-channel encoders only)

Access to Internet by PPPoE method; supports Peanut Hull, DynDNS, and more

Sets time by NTP

PTZ Control

Support multiple PTZ protocols; different channels can be configured with protocol type, RS-485 address, baud

rate, data bit, stop bit, even/odd parity, stream control method, and more; support for remote configuration of

presets, patrols, and patterns.

Relay input alarm can be responded to with PTZ linkage actions, such as presets, patrols, or patterns.

www.exacq.com

+1.317.845.5710

+44.1438.310163

USA (Corporate Headquarters)

Europe/Middle East/Asia

Alarm

Relay alarm input; normally open or normally closed; four configurable alarm arming periods; triggering of

corresponding alarm handling methods, relay alarm output, buzzer alarm, upload to control center, PTZ linkage,

presets/patrols/patterns, and more.

Relay Alarm Output; can be connected with alarm devices for alarm handling within arming period.

Exceptions

Exception alarm handling; includes network disconnect alarm, IP address conflict alarm, illegal access alarm, and

more; multiple alarm handling methods supported, relay alarm output, buzzer alarm, and more.

Exception reboot; software watchdog for inspecting important threads and system resources of device; device

automatically restarted if exceptions are detected.

Firmware watchdog for inspecting the firmware of device; device automatically restarted in case of exceptions in

system task scheduling.

Logs

Can be classified into the operation logs, alarm logs, exception logs, and information logs; searchable and

viewable by date or type; exportable in text format over network.

www.exacq.com

+1.317.845.5710

+44.1438.310163

USA (Corporate Headquarters)

Europe/Middle East/Asia

2Encoder Overview

E-ADE1C FRONT PANEL

Item

Description

POWER LED Indicator

Red when the device is powered on; orange when the SD card is

inserted.

VIDEO IN

BNC connector for video input.

LINE IN

3.5mm interface for two-way audio input or audio input; connect to

audio input device or active pick-up, microphone, etc.

AUDIO OUT

3.5mm interface; connect to audio output device such as loudspeaker.

microSD

microSD interface for log storage.

RESET

Hold button for more than 15 seconds after power is turned on to

restore factory-default settings.

www.exacq.com

+1.317.845.5710

+44.1438.310163

USA (Corporate Headquarters)

Europe/Middle East/Asia

E-ADE4C FRONT PANEL

Item

Description

POWER LED Indicator

Red when the device is powered on; orange when the SD card is inserted.

LINE IN

3.5mm two-way audio input interface; connect to active pick-up,

microphone, etc.

AUDIO OUT

3.5mm interface; connect to audio output device, such as loudspeaker.

VIDEO IN

BNC interface for video input.

AUDIO IN

Line input interface for audio input.

www.exacq.com

+1.317.845.5710

+44.1438.310163

USA (Corporate Headquarters)

Europe/Middle East/Asia

E-ADE1C REAR PANEL

Item

Description

ALARM IN /OUT

Relay alarm input/output. (JP2 pin not available on output.)

RS-485

RS-485 serial interface; connect to pan/tilt unit, speed dome, etc.

LAN

10M/100Mbps adaptive Ethernet interface (PoE). Right LED indicator

lights in green when the network cable is connected; left LED

indicator blinks in orange when data is transmitting/receiving.

DC12V

12V DC power supply.

GND

Grounding.

www.exacq.com

+1.317.845.5710

+44.1438.310163

USA (Corporate Headquarters)

Europe/Middle East/Asia

E-ADE4C REAR PANEL

Item

Description

ALARM IN

Relay alarm input.

ALARM OUT

Relay alarm output.

RS-232

Serial interface for configuration of device’s parameters; or used as

transparent channel.

RS-485

RS-485 serial interface; connect to pan/tilt unit, speed dome, etc.

RESET

Hold button for more than 15 seconds after the device is turned on to

restore factory-default settings.

microSD

microSD interface for data storage.

LAN

10M/100Mbps adaptive Ethernet interface (PoE). Right LED indicator

lights in green when the network cable is connected; left LED indicator

blinks in orange when data is transmitting/receiving.

DC12V

12V DC power supply.

GND

Grounding.

Table of contents

Popular Media Converter manuals by other brands

SoundTraxx

SoundTraxx Blunami BLU-2200 user guide

SPROLINK

SPROLINK VA1 user manual

Acclaim Lighting

Acclaim Lighting DDC-1-AC user guide

Nikon

Nikon AF-S TC-20E III user manual

Axis

Axis AXIS Q7406 user manual

Omega

Omega TAC80B-J instruction sheet

Zoom

Zoom Thunderbolt TAC-2R Operation manual

OST

OST iConverter 10/100M quick start guide

Vertiv

Vertiv Netsure user manual

birddog

birddog MINI user guide

Roland

Roland GI-10 owner's manual

Wallenstein

Wallenstein WX310 Operator's manual

Pace

Pace MSS 200-1 Service manual

Solar Converters

Solar Converters EQ 12/24-50 manual

CYP

CYP EL-7400V Operation manual

TIE

TIE MIDI 1i1o user manual

DCS

DCS Vivaldi Upsampler user manual

Westermo

Westermo MCW-211 SERIES user guide

Exacq exacqVision E Series User manual

Popular Media Converter manuals by other brands