EVRY X-FIT User manual
User Manual 2019
Introduction & Disclaimer
First of all, we would like to thank you for buying our X-Fit electric bike.
Our e-bike has been refined and perfected for almost 2 years by our senior designers and engineers to make it
the best e-bike in its class.
X-FIt has a modern design and convenient folding feature. It is very easy to operate and ride. X-Fit is an
economical and practical form of portable, alternative transport, that is also environmentally friendly.
For your riding safety and to help you understand the e-bike, you should read this user manual before riding.
Please do not use your X-Fit until you learn about its performance and operating systems to ensure a smooth,
safe ride.
WARNING
Using this product could result in serious injury, even if you are using safety equipment. X-Fit, its companies,
partners, associates and factories do not accept any liability whatsoever, in regards to the use of this product by
any person. This product is intended for adult use only (age 18+). This product is not a toy. Do not permit
individuals under the age of 18 to operate it. Keep this product away from unsupervised children. Do NOT
exceed the weight limit of 265 lbs (120 kg) and do not allow more than one passenger on the bike at a time.
Always wear a safety helmet and proper protective gear. Do not ride barefoot and always ride with both hands
on the handlebars.
Table of Contents
1. Product Diagram____________________4
2. Precautions Before Use______________5
3. Basic Parameters & Performance_______6
4. LCD Multi-Display Panel______________7
5. Electrical Wiring Diagram_____________8
6. Battery and Charger Care____________10
7. Use & Installation___________________12
8. Troubleshooting____________________15
9. Warranty__________________________16
10. Quality Control___________________18
1. Product Diagram
1. 10-inch Pneumatic Tire (air 40psi)
2. Suspension Fork
3. Shock Absorber
4. Slip Joint for Folding Function
5. Horn and Front LED Light Switch
6. Brake Levers (Disconnects Power to
Motor When Pulled)
7. LCD Multi Display Panel
8. Twist Throttle
9. Trigger for Folding the e-bike
10. Adjustable Seat
11. Charging Port
12. Battery Cover With LED Brake Light
13. Brushless, Gearless Motor (Hub)
14. Kickstand
15. Foot Rests
16. Mechanical Lock/Key
Start
2. Precautions Before Use
1. Before using, learn about X-Fit features, functions, and basic operations in this handbook.
2. Make sure that the brakes are working correctly and the tires have been sufficiently filled with air ( pressure
of approximately 40 psi).
3. For riding comfort and safety, adjust the seat height to ensure that your feet can touch the ground.
4. When using your X-Fit for the first time, please ride a short distance to make sure you can handle the e-bike.
Only attempt to ride longer distances—on the road, bike lane, sidewalk, or across roads—AFTER you have
learned to control the e-bike.
5. This e-bike is not suitable for use in poor road and weather conditions, such as in rain or snow or on icy
surfaces. Do not use your e-bike for extreme sports or try to do tricks UNLESS you are a professional and
use protective gear. We always recommend riders wear a helmet.
6. When the outside temperature is 23 °F (-5 °C), it will have a negative impact on battery usage. So
please charge your battery at room temperature. Please always discharge your battery before charging. This
will improve performance and lifespan.
7. The riding distance of this e--bike is measured based on an average temperature of 77 °F (25 °C),
an average weight of 170 LBS (77 KG), and assumption of smooth, flat surfaces. Battery life will fluctuate
based on variations in a rider’s weight, riding environment, temperatures and riding habits/speed. Maximum
range is achieved when riding on a flat, even surface, below the maximum speed, and with the rider’s weight
around 170 lbs.
3. Basic Parameters & Performance
Finished e-bike
Battery
Wheel base
30.55”
Voltage
36V
L x W x H (unfolded)
40.75”*41.34”*21.65”
Capacity
25 mile = 8.4AH
37 mile =11.6AH
L x W x H (folded)
41.54”*23.74”*11.8”
Battery core
Panasonic 18650-2900PF
Maximum speed
15.5 miles/h
Cycle life
More than 1,000 times
Maximum riding mileage
25/37 miles
Discharging rate
3C
Maximum load
265 lbs
Charging time
4h
Noise
Less than 60db
Controller
Wheel diameter
10”
Style
Sine wave
Overall weight
Less than 40 lbs
Maximum current
14A
Motor
Minimum voltage
29V
Rated voltage
36V
Charger
Rated power
350W
Input voltage
220V
Rated rotor speed
600RPM
Output voltage
42V
Maximum torque
16N.M
Output current
2A
Maximum efficiency
83%
Plug style
3pin aviation plug
Style
Brushless and gearless
Maximum permissible
gradient
15°
4. LCD Multi-Display Panel
▶LCD Display Panel
▶LED Headlight
▶Speedometer
▶Remaining Battery Meter
▶Temperature Display
▶Odometer/Tripometer Display
5. Electrical Wiring Diagram
Wiring diagram for controller (general set)
6. Battery and Charger Care
Battery description
Fully-charged
voltage
41.5v
Undervoltage
protection
29v
Core brand
Panasonic power core
Core quantity
30/40pcs
Charging
temperature
32~113 F
Discharging
temperature
-4~140 F
IMPORTANT
The battery is located in the frame of the
e-bike underneath the charging port area. Do
not attempt to disassemble the battery
compartment, or try to connect positive to
negative. Please charge the e-bike every
15-30 days (even if not being used) in order
to keep the battery healthy. For optimum life
span, the battery should be empty before
charging.
USING THE CHARGER:
1. Connect charger plug to 110/240v main
power supply socket first.
2. Connect charger to the e-bike charging
port, and screw into place.
3. After the e-bike is fully charged, remove
the plug from the e-bike charge port and
then pull the power cord gently from the
wall.
4. Always try to charge the battery from an
almost empty charge, and never let it stay
uncharged for more than 1 month.
Table of contents
Other EVRY Scooter manuals
