Evolution Fury3-B Owner's manual

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

Supplemental Manual How to Change Saw Blade

This document is only suplemental manual with some tricks. If you are unsure how to proceed,

please consult with the original saw manual.

FIRST: ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

Please mind that this saw blade change can be performed by experienced person.

Please ensure that you use a correct balde for the saw with correct blade diameter,hole diammeter,

allowed rpm and type.

This manual for changing balde is for Evlotution FURY3-B mitre saw.

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

Remove two bolts as depicted on the picture below.

Please ensure that you don’t lost rubber for securing turning plate. The rubber poistion is depicted

on the below picture.

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

Remove bolt which holds the safe cover.

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

Lift saw up. Lift safe cover when needed to expose blade.

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

On the bottom of the engine is the axle. Push inside and hold it with one hand.

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

At the same time unscrew bolt holding saw the blade.

The holding bolt should go out easily. If you can’t unscrew easily, please use WD40. Wait a while and

try again. Unscrewing is clockwise!

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

Take out the old blade and put in the place the new one.

Follow the TURNING ARROW !!!! Arrows on the blade and saw have to have to have the same

orientation!!!

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

If the blade has a wider hole, you need to use washer.

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

Screw back the bolt which holds the blade. The bolt has to be fastened firmly! Please use reasonable

strong force to screw the bolt. Screwing is anti-clockwise.

ENSURE THAT SAW IS UNPLUGGED FROM THE POWER SUPPLY !!!!

Test by hand manually that the blade turns freely.

Also test turning blade by hand when you put saw down into working position and check that blade

moves freely in horizontal position down and all angles.

If the blade doesn’t turn freely, please check blade is the correct side and consult with the saw

manual.

Screw back bolt holding the safety cover

Other manuals for Fury3-B

1

Other Evolution Saw manuals

Evolution

Evolution FURY TWIN Series User manual

Evolution

Evolution R230 RCP User manual

Evolution

Evolution R185CCSL User manual

Evolution

Evolution FURY5 User manual

Evolution

Evolution R230 DCT User manual

Evolution

Evolution R210SMS User manual

Evolution

Evolution R255SMS User manual

Evolution

Evolution Fury User manual

Evolution

Evolution EVOSAW355 User manual

Evolution

Evolution RAGE5-S User manual

Evolution

Evolution FURYTWIN125 User guide

Evolution

Evolution EVOSAW2301 User manual

Evolution

Evolution S355CPSL User manual

Evolution

Evolution Rage3B2102 User guide

Evolution

Evolution R355CPS User manual

Evolution

Evolution Fury 5-S Installation guide

Evolution

Evolution F210 User manual

Evolution

Evolution R230 RCP User manual

Evolution

Evolution R185 SMS User manual

Evolution

Evolution EvoSaw 230 User manual

Evolution

Evolution EVO230-HDX User manual

Evolution

Evolution R210 CMS User manual

Evolution

Evolution D0911 User manual

Evolution

Evolution R255 PTS User manual

Popular Saw manuals by other brands

RIDGID

RIDGID BS1400 owner's manual

ATIKA

ATIKA BWS 400-2 Original instructions

RGC

RGC FS20 instructions

Makita

Makita M2300 instruction manual

IMET Spa

IMET Spa BASIC 300 PLUS SHI Instructions for use

IMET Spa

IMET Spa SIRIO 370 AF-E User instructions

Optimum

Optimum OPTisaw CS 275 operating manual

Makita

Makita BPB180 instruction manual

Stihl

Stihl MS 462 C-M instruction manual

AEG

AEG TS 250 K Original instructions

Meec tools

Meec tools 004665 operating instructions

Makita

Makita LS1018L instruction manual

Ryobi

Ryobi RCS1400 Original instructions

DeWalt

DeWalt DCS391 instruction manual

Sealey

Sealey SA72 instructions

skilsaw

skilsaw SPT88 Operating/safety instructions

Urrea

Urrea SI810 User manual and warranty

EINHELL

EINHELL BKG 210/1 operating instructions