Evoheat EVO FLEX 10 User manual

Installation and Instruction Manual

Inverter Air Source Water Heat Pump

CONTENT

1 Preface 1

3 Specification 5

(3) Unit dimension 7

4 Installation

7 Appendix

2 Safety Precaution 2

(1) Mark notes 2

(2) Icon Notes 2

(3) Warning 3

(1) Appearance and structure of the heat pump

(2) The data of unit

(1) Application of heat pump

(2) Choose a right heat pump unit

(3) Installation place

(4) Installation method

(5) Water loop connection

(6) Power supply connection

(7) Location of the unit

(8) Transit

(9) Trial Running

6 Form of Troubleshooting

(1) Appendix 1

(2) Appendix 2

(3) Appendix 3

(4) Appendix 4

(5) Appendix 5

(4) Attention 4

(1) Make judgment and troubleshooting

(6) Appendix 6

5 Use and Operation Instruction of Wire Controller

(1)Main interface display and function

(3) Mode switch

(5) Temperature setting

(4) Setting of target temperature

(2) On and off

(6) Fast heating

(8) Setup interface

(7) Timer setting

(9) The operation of time setting

2 Neat Appearance

The heat pump is designed to look neat and subtle. The monobloc one has the water

The PC microcomputer based controller is available for the users to review or set the running

parameters of the heat pump. Centralized controlling systems can control several units by PC.

pump included which is very easy for installation.

3 Flexible installation

The unit has a smart structure with compact body, just a simple outdoor installation is needed.

4 Quiet running

High quality and efficient compressor, fan and water pump is used to ensure low noise level with

insulation.

5 Good heat exchange rate

The heat pump unit uses a specially designed heat exchanger to enhance whole efficiency.

6 Large working range

This series of heat pump is designed to work under different working conditions as low

as -15 degrees for heating.

In order to provide our customers with high quality, strong, reliable and versatile products, this

heat pump is produced by strict design and manufacture standards.

This manual includes all the necessary information about installation, debugging,

discharging and maintenance. Please read this manual carefully before you open or

maintain the unit.

The manufacturer of this product will not be held responsible if someone is injured or

the unit is damaged as a result of improper installation, debugging, unnecessary maintenance

which is not in line with this manual.

The unit must be installed by qualified personnel.

It is vital that the below instructions are adhered to at all times to keep the warranty.

—The unit can only be opened or repaired by qualified installer or an authorised dealer.

—Maintenance and operation must be carried out according to the recommended time and

frequency, as stated in this manual.

—Use genuine standard spare parts only.

Failure to comply with these recommendations will invalidate the warranty.

The Evo Flex is a high efficiency, energy saving and environmentally friendly equipment, which is

mainly used for house warming. It can work with any kind of indoor unit such fan coil, radiator, or

floor heating pipe, by providing warm or hot water. One unit of monobloc heat pump can also work

with several indoor units.

The Evo Flex is designed to have heat recovery by using a super heater which can provide hot

water for sanitary purposes.

This series of heat pump unit has the following features:

1 Advanced controlling

Preface

Mark

Icon

Meaning

A wrong operation may lead to death or heavy injury on

people.

A wrong operation may lead to harm on people or loss of

material.

Prohibition. What is prohibited will be nearby this icon

Compulsory implement. The listed action need to be taken.

ATTENTION (include WARNING)

Please pay attention to what is indicated.

Mark Notes

Icon notes

WARNING

ATTENTION

To prevent the users and others from the harm of this unit, and avoid

damage on the unit or other property, and use the heat pump properly,

please read this manual carefully and understand the following

information correctly.

Safety Precaution

The manufacture of this product will not be held responsible if someone is injured or

the unit is damaged, as a result of improper installation, debugging, unnecessary

maintenance which is not in line with this manual.

This manual includes all the necessary information about installation, debugging,

discharging and maintenance. Please read this manual carefully before you open or

maintain the unit.

4 Quiet running

High quality and efficient compressor, fan and water pump is used to ensure the low

noise level with insulation.

5 Good heat exchange rate

The heat pump unit use special designed heat exchanger to enhance whole efficiency.

The unit must be installed by qualified personnel.

—The unit can only be opened or repaired by qualified installer or an authorised dealer.

—Use genuine standard spare parts only.

—Maintenance and operation must be carried out according to the recommended time and

frequency, as stated in this manual.

Failure to comply with these recommendations will invalidate the warranty.

2 Nice appearance

The heat pump is designed with beautiful looking. The monobloc one has the water

pump included which is very easy for installation.

3 Flexible installation

The unit has smart structure with compact body, just simple outdoor installation is needed.

This series of heat pump unit owns following features:

1 Advanced controlling

The PC microcomputer based controller is available for the users to review or set the

running parameters of the heat pump. Centralized controlling system can control several

units by PC.

It is vital that the below instructions are adhered to at all times to keep the warranty.

Inverter ir ource ater eat umpa s w h p is a kind of high efficiency, energy saving and

environment friendly equipment, which is mainly used for house warming. It can work with

any kind of indoor unit such fan coil, radiator, or floor heating pipe, by provide warm or hot

water. One unit of monobloc heat pump can also work with several indoor units.

The air source water heat pump unit is designed to have heat recovery by using super

heater which can provide hot water for sanitary purpose.

6 Large working range

This series of heat pump is designed to work under different working conditions as low

as -15 degrees for heating.

In order to provide the customers with high quality, strong reliability and good versatility

product, this heat pump is produced by strict design and manufacture standards.

Preface

Mark

Icon

Meaning

A wrong operation may lead to death or heavy injury on

people.

A wrong operation may lead to harm on people or loss of

material.

Prohibition. What is prohibited will be nearby this icon

Compulsory implement. The listed action need to be taken.

ATTENTION (include WARNING)

Please pay attention to what is indicated.

Mark Notes

Icon notes

WARNING

ATTENTION

To prevent the users and others from the harm of this unit, and avoid

damage on the unit or other property by using the heat pump properly.

Please read this manual carefully and understand the following information

correctly.

Safety Precaution

安装前注意事项

The heat pump must be installed by qualified personals,

to avoid improper installation which can lead to water

leakage, electrical shock or fire.

Please make sure that the unit and power connection have

good earthing, otherwise it may cause electrical shock.

Installation

Professional installer

is required.

Earthing is required

Warning

Safety Precaution

Meaning

Operation Meaning

PROHIBITION

Shut off the power

DO NOT put fingers and hands into the fans and evaporator of

the unit, otherwise it may cause injury.

When there is something wrong or a strange smell, the power

supply needs to be shut off to stop the unit. Continuing to run

may cause electrical shortage or fire.

Move and repair

Entrust

Prohibit

Entrust

When the heat pump needs to be moved or installed again,

please entrust dealer or qualified person to carry it out.

Improper installation will lead to water leakage, electrical

shock, injury or fire.

It is prohibited to repair the unit by the user himself,

otherwise electrical shock or fire may occur.

When the heat pump needs to be repaired, please entrust

dealer or qualified person to carry it out. Improper movement or

repair on the unit will lead to water leakage, electrical shock,

injury or fire.

Meaning

Switch off

the power

Prohibition

Please switch off the power for clean or maintenance.

It is prohibited to use copper or iron as fuse. The right fuse

must be fixed by electrician for the heat pump.

It is prohibited to spray the flammable gas to the heat pump,

as it may cause fire.

Installation

Operation

Prohibition

安装前注意事项

ATTENTION

Check the

installation basement

Please check the installation basement in a period (one

month), to avoid any decline or damage on the basement,

which may hurt people or damage the unit

Safety Precaution

Meaning

Fix the unit

Installation Place

Need

circuit breaker

The unit CANNOT be installed near the flammable gas.

Once there is any leakage of the gas, fire can be occur.

Make sure that the basement of the heat pump is strong

enough, to avoid any decline or fall down of the unit

Make sure that there is circuit breaker for the unit, lack of

circuit breaker can lead to electrical shock or fire.

Meaning

安装前注意事项

The heat pump must be installed by qualified personals,

to avoid improper installation which can lead to water

leakage, electrical shock or fire.

Please make sure that the unit and power connection

have good earthing, otherwise may cause electrical shock.

Installation

Professional installer

is required.

Earthing is required

Warning

Safety Precaution

Meaning

Operation Meaning

PROHIBITION

Shut off the power

DO NOT put fingers or others into the fans and evaporator

of the unit, otherwise harm may be occurred.

When there is something wrong or strange smell, the power

supply need to be shut off to stop the unit. Continue to run

may cause electrical short or fire.

Move and repair

Entrust

Prohibit

Entrust

When the heat pump need to be moved or installed again,

please entrust dealer or qualified person to carry it out.

Improper installation will lead to water leakage, electrical

shock, injury or fire.

It is prohibited to repair the unit by the user himself,

otherwise electrical shock or fire may be occur.

When the heat pump need to be repaired, please entrust

dealer or qualified person to carry it out. Improper movement

or repair on the unit will lead to water leakage, electrical

shock, injury or fire.

Meaning

Switch off

the power

Prohibition

Please switch off the power for cleaning or maintenance.

It is prohibited to use copper or iron as a fuse. The right fuse

must be fixed by an electrician for the heat pump.

It is prohibited to spray the flammable gas to the heat pump,

as it may cause fire.

Installation

Operation

Prohibition

安装前注意事项

ATTENTION

Check the

installation basement

Please check the installation basement in a timely period

(monthly), to avoid any decline or damage on the base which

may hurt people or damage the unit

Safety Precaution

Meaning

Fix the unit

Installation Place

Need

circuit breaker

The unit CANNOT be installed near flammable gas. Once

there is any leakage of the gas, fire can be occur.

Make sure that the basement of the heat pump is strong

enough to avoid the unit moving or falling.

Make sure that there is circuit breaker for the unit, lack of

circuit breaker can lead to electrical shock or fire.

Meaning

Specification

1. Appearance and Structure of the heat pump

The longest distance of installing the

remote controller is 200 meters.

Air outlet in horizontal

direction

Water intlet tube

Remote Controller

(Manually)

Water outlet tube

Evo Flex 17 & 25

Air outlet in horizontal

direction

Water outlet tube

Water intlet tube

The longest distance of installing the

remote controller is 200 meters.

Remote Controller

(Manually)

Evo Flex 10

2. The data of unit

Specification

Cooling working condition:(DB/WB)35℃/24℃, (Outlet/Inlet) 7℃/12℃.

Heating working condition: (DB/WB) 7℃/6℃. (Outlet/Inlet) 35℃/30℃.

Hot Water working condition: (DB/WB) 20℃/15℃. (Outlet/Inlet) 40℃/45℃.

BS EN 14511-1-2013 Air conditioner, whole liquid cooling machine, electric compressor.

Part2: Test condition Part3:Test method Part4:related requirements.

Model

Cooling Capacity

Heating Capacity

Hot Water Capacity

Cooling Power Input

Heating Power Input

Hot Water Power Input

Operation Electric Current(max)

Cooling Capacity Range

Heating Capacity Range

Hot Water Capacity Range

Cooling Power Input Range

Heating Power Input Range

Hot Water Power Input Range

Power Supply

Compressor Quantity

Compressor Model

Fan Quantity

Fan Power Input

Fan Rotate Speed

Noise

Water Pump Input

water head

Water Connection

Water Flow Volume

Water Pressure Drop(max)

Unit Net Dimensions (L/W/H)

Unit Shipping Dimensions (L/W/H)

Net Weight

Shipping Weight

BTU/h

RPM

dB(A)

inch

m /h

kpa

H8A

34121

11.5

39240

13.2

45040

3.4

3.6

15.7

2.0～10

2.5～11.5

4.2～13.2

1.0～3.4

0.8～3.4

1.0～3.6

230V～/50Hz

Rotary

850

0.18

12.5

1.6

953*445*910

1040*490*920

See nameplate

See package label

H15B

14.5

49489

16.5

56315

21.6

73702

5.6

5.1

6.2

5.0～14.5

5.0～16.5

7.4~21.6

1.6～5.6

1.2～5.1

1.5~6.2

230V～/50Hz

Rotary

75×2

850

0.5

1 1/4

2.8

105

996*395*1320

1070*435*1340

See nameplate

See package label

H25T

68260

85325

102364

9.0

8.2

14.0

7.0～20.0

8.0～25.0

11.0~30.0

2.5～9.0

2.1~8.2

380V/3N～/50Hz

Rotary

150×2

900

0.65

22.5

1 1/4

4.2

1175*400*1592

1225*430*1600

See nameplate

See package label

5.4

18426

6.4

21838

7.3

24909

1.9

2.0

2.1

8.7

1.6～5.4

1.9～6.4

3.0~7.3

0.6～1.9

0.6～2.0

0.7~2.1

230V～/50Hz

Rotary

850

0.05

6.2

1.0

1008*463*790

1060*500*805

See nameplate

See package label

Specification

1. Appearance and Structure of the heat pump

The longest distance of installing the

remote controller is 200 meters.

Air outlet in horizontal

direction

Water intlet tube

Remote Controller

(Manually)

Water outlet tube

H15B/H25T

Air outlet in horizontal

direction

Water outlet tube

Water intlet tube

The longest distance of installing the

remote controller is 200 meters.

Remote Controller

(Manually)

H6/H8A

2. The data of unit

Specification

Cooling working condition:(DB/WB)35℃/24℃, (Outlet/Inlet) 7℃/12℃.

Heating working condition: (DB/WB) 7℃/6℃. (Outlet/Inlet) 35℃/30℃.

Hot Water working condition: (DB/WB) 20℃/15℃. (Outlet/Inlet) 40℃/45℃.

BS EN 14511-1-2013 Air conditioner, whole liquid cooling machine, electric compressor.

Part2: Test condition Part3:Test method Part4:related requirements.

Model

Cooling Capacity

Heating Capacity

Hot Water Capacity

Cooling Power Input

Heating Power Input

Hot Water Power Input

Operation Electric Current(max)

Cooling Capacity Range

Heating Capacity Range

Hot Water Capacity Range

Cooling Power Input Range

Heating Power Input Range

Hot Water Power Input Range

Power Supply

Compressor Quantity

Compressor Model

Fan Quantity

Fan Power Input

Fan Rotate Speed

Noise

Water Pump Input

water head

Water Connection

Water Flow Volume

Water Pressure Drop(max)

Unit Net Dimensions (L/W/H)

Unit Shipping Dimensions (L/W/H)

Net Weight

Shipping Weight

BTU/h

RPM

dB(A)

inch

m /h

kpa

34121

11.5

39240

13.2

45040

3.4

3.6

15.7

2.0～10

2.5～11.5

4.2～13.2

1.0～3.4

0.8～3.4

1.0～3.6

230V～/50Hz

Rotary

850

0.18

12.5

1.6

953*445*910

1040*490*920

See nameplate

See package label

14.5

49489

16.5

56315

21.6

73702

5.6

5.1

6.2

5.0～14.5

5.0～16.5

7.4~21.6

1.6～5.6

1.2～5.1

1.5~6.2

230V～/50Hz

Rotary

75×2

850

0.5

1 1/4

2.8

105

996*395*1320

1070*435*1340

See nameplate

See package label

68260

85325

102364

9.0

8.2

14.0

7.0～20.0

8.0～25.0

11.0~30.0

2.5～9.0

2.1~8.2

380V/3N～/50Hz

Rotary

150×2

900

0.65

22.5

1 1/4

4.2

1175*400*1592

1225*430*1600

See nameplate

See package label

Evo Flex

Specification

H25T

3. Unit dimension

Specification

H15B

725

1175

400

450

Water i nlet 1 1/4''

Water outlet 1 1/4''

1592

254

320 55

996

650

395

437

1320

Water inlet 1 1/4''

Water outlet 1 1/4''

133

55 330

525

700

465 445

910

338

Water outlet 1

Water inlet 1

953

132

Evo Flex 10

Specification

Evo Flex 25

3. Unit dimension

Specification

Models:H6

Evo Flex 17

750

490 463

790

347

Water outlet 1

Water inl et 1

725

1175

400

450

Water i nlet 1 1/4''

Water outlet 1 1/4''

1592

254

320 55

996

650

395

437

1320

Water inlet 1 1/4''

Water outlet 1 1/4''

133

55 330

525

1008

700

465 445

910

338

Water outlet 1

Water inl et 1

953

132

H8A

Other manuals for EVO FLEX 10

This manual suits for next models

Table of contents

Other evoheat Heat Pump manuals

evoheat

evoheat Evo315-C User manual

evoheat

evoheat CS Series User manual

evoheat

evoheat CS User manual

evoheat

evoheat Evo Fusion-i User manual

evoheat

evoheat CS User manual

evoheat

evoheat EVO 270 User manual

evoheat

evoheat Fusion-i 7 User manual

evoheat

evoheat EVO ULTRA 64 User manual

evoheat

evoheat Polaris MT 70 Service manual

evoheat

evoheat EVO FLEX 10 User manual

evoheat

evoheat Polaris LA 60 Quick guide

evoheat

evoheat Force-i 9 User manual

evoheat

evoheat Evo Fusion-i User manual

evoheat

evoheat EVO ULTRA 32 User manual

evoheat

evoheat Force 26-3 Guide

evoheat

evoheat EVO150-1 User manual

evoheat

evoheat CS-i Series User manual

evoheat

evoheat 270 User manual

evoheat

evoheat EVO 270 User manual

evoheat

evoheat Force-i Series User manual

evoheat

evoheat Evo Control 17 User manual

evoheat

evoheat EVO FLEX 10 User manual

evoheat

evoheat Evo270-1 User manual

evoheat

evoheat CS57 User manual

Popular Heat Pump manuals by other brands

MICROWELL

MICROWELL HP 1000 GREEN Installation and user manual

Sanyo

Sanyo SAP120FCH Service manual

Daikin

Daikin EHYHBH05AA Operation manual

Panasonic

Panasonic WH-SDF03E3E5 Design handbook

Bryant

Bryant 544B Specifications

Airxcel

Airxcel 45000 Series Installation, operation and maintenance instructions

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Service manual

Dimplex

Dimplex LI 16I-TUR Installation and operating instruction

Carrier

Carrier WSHP Open v3 Integration guide

TGM

TGM CTV14CN018A Technical manual

Carrier

Carrier 38MGQ Series installation instructions

Kokido

Kokido K2O K880BX/EU Owner's manual & installation guide

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Installation and service instructions

Carrier

Carrier 48EZN installation instructions

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Installation and service instructions for contractors

Ariston

Ariston NIMBUS user manual

Weishaupt

Weishaupt WWP L 7 Installation and operating instruction

GE Zoneline AZ85H09EAC datasheet