Evo 300SB User manual
Spin Bike
300SB
User Manual
For all service enquiries go to www.evofitness.net.au or call toll free 1300796636
CONTENTS
SAFETY & MAINTENANCE INSTRUCTIONS……………….…….…….1
GENERAL KNOWLEDGE …………....………...……..………..…………..2
ASSEMBLY INSTRUCTIONS……..……………………….…….………….3-12
SAFETY & MAINTENANCE INSTRUCTIONS
1. Once assembled fully, please ensure that all parts such as bolts, nuts and washers are
positioned and tightened correctly.
2. Inspect the safety chain guard of the bike regularly to ensure that all screws and
bolts are tight.
3. Always inspect the seat post, seat slider, pedals and handlebar to make sure they are
in safe and stable position before using the bike.
4. Do not wear loose clothing
5. Running or aerobic shoes are required when using the bike. Do not wear bare feet.
6. Dry the bike after each use to remove sweat and moisture. Wipe your bike regularly
with a mild, non-abrasive cleaner and water solution. To avoid damaging the finish
on the bike, never use a petroleum-based solvent when cleaning.
7. Please keep children away from the bike while it is in use. Do not allow children to
use the bike. This bike is designed for adults, not children.
8. Do not dismount the bike until the pedals are at a complete STOP.
9. If you have any pain or tightness in your chest, an irregular heartbeat, shortness of
breath, feel faint or have any discomfort while you exercise, STOP!
10. Do not place fingers or any other objects into moving parts of the exercise
equipment.
11. Before starting any exercise program, consult with your physician first. He or she
can help establish the exercise frequency, time and intensity appropriate for your
particular age and condition.
12. After exercising, please turn the adjustment control knob clockwise (+) to increase
tension so the pedals will not rotate freely and possibly hurt someone.
GENERAL KNOWLEDGE
1. This cycle should always be placed on a level surface for use. You may raise or lower
the bike by adjusting the four leveling bolts (16).
2. Adjust Seat (22) to a suitable position by adjusting Seat Sliders (3) and Seat Post (2).
And please adjust height of Handlebar (4) according to your body size.
3. Set the correct resistance by Adjusting Knob (11) please set a right resistance
according to your requirement.
4. The drive mode of the equipment is bi-directive drive. Please press Brake Handle (9)
for braking when aggressive exercise is performed and it will stop immediately. Do
not leave the seat until all parts come to a complete stop.
Item
NO. Description Specification QTY
1 Main Frame 1
2 Seat post 35*460*t2 1
3 Seat Slider 35*280*t2 1
4 Handlebar Post 35*280*2T 1
5 Handlebar Ø28*998*t2 1
6 Tension Bracket 1
7 Back Stabilizer Flat elliptical 30*70*2T*498L 1
8 Front Stabilizer Flat elliptical 30*70*2T*498L 1
9 Brake-handle 1
10 Felt Pad Ø10xØ25xT5 1
11 Tension Knob M10*P1.25*60 1
12 Cover (right) 1
13 Cover (Left) 1
14 Belt Cover A 1
15 Belt Cover B 1
16 Leveler M10 4
17 Plastic Sheath – inner
Pipe
Match 45*45*2 square tube
38x38 square tube 3
18 Inner cover of iron tube 30*70*2 use in elliptical tube 4
19 Inner tube plug Match 35*35*2T square tube 1
20 Front cover Use in belt driven 1
21 Transportation wheel D8*D71 5*W223 2
22 Seat 1
23 Adjusting knob M16*P1.5*35L 3
24 Φ21 plug 1
25 Inner tube plug 45*45*2T square tube 1
26 Inner hexagon hollow
screw Φ8*M6*30 3
27 Flat washer Φ12*Φ25*1.5T 1
28 Belt 5PK54" 1
29 Tension spring Ø2.5*17 loop 1
30 Spline Shaft 1
31 Left and right crank 170 9/16"-20UNF 1
32 Crank cover 2
33 Flat washer Φ20*Φ10*1.5 4
34 Inner hexagon round head
Screw M10x25 4
35 Left/ right pedal 9/16"-20UNF-RH 1
36 Flywheel 1
37 Flywheel axle M12*P1.0*166 1
38 PK belt wheel Ø205*19.8W 1
39 Tube cover Ø18*Ø12*34L 1
40 Pulley, Flywheel φ37*φ30*24.5 1
41 Friction brake pad 2
42 Clamp Brake Holder T4.0*M10*P1.25 1
43 Flat washer Ø10.2-Ø25*T1.5 1
44 6001 6001 black plastic shuck
ABEC-5 2
45 6004 6004 black plastic shuck
ABEC-5 2
46 608 608 4
47 C shape axes snap spring Φ10 1
48 C shape axes snap spring Φ20 2
49 Spring nut Φ4.8*T0.8 1
50 Cross big flat head
tapping screw ST4.8*15 17
51 Hexagon flange nut M12x1.0 1
52 M12 nut cap M12*p1.0 1
53 Hexagon flange nut M10*P1.25 2
54 Cross sinking screw M5*12L 2
55 Hexagon thin nut M12 M12*1.0 3
56 Hexagon flange nut M6 1
57 Nylon nut M10 1
58 Nylon nut M10*P1.25 1
59 Flat mat GB/T97.2 10 Φ10*1.5 6
60 Flat mat GBT97.2 5 Φ5.2*1.0 4
61 Hexagon nut M10 4
62 Braking rope 2
63 Inner hexagon flat round
head screw M6x12 M6x12 3
64 Inner hexagon flat round
head screw M10x25 M10x25 1
65 Inner hexagon flat round
head M10x16 M10x16 4
66 Inner hexagon round head
screw M6x40 M6x40 1
67 Clamp Brake Assembly 1
68 Friction flake fixing base 2
69 Pedal cage 2
70 Pedal rope 2
71 Bottle 1
72 Bottle shelf 1
73 Umbrella cross screw M5x12L 2
74 Computer 1
75 Computer shelf 1
76 Flat washer Φ30*10.5*4T 2
77 Handle M10*25L 2
78 Computer sensor base 1
79 Magnet 1
Small exploded diagram
Installation
Step 1: Assemble base of bike
Attach the front stabilizer (8) and rear stabilizer (7) to the main frame (1) with inner
hexagon flat round head M10x25L (34), flat washer φ20*φ10*1.5T (33) (4 Pcs / item)
using tools.
Step 2: Assemble left and right pedals.
Connect the right and left pedals (35) to their appropriate crank arms, then tighten
using open spanner 15#.
Step 3: Assemble the adjustable handlebar post
Loosen the adjusting knob (23), and slide the handlebar post (4) into the handlebar
post
housing on the main frame, then tighten the adjusting knob (23).
Step 4: Assemble the handlebar
Assemble the handlebar (5) onto the handlebar post and tighten it with adjusting handle
(77) and flat washer (76).
Table of contents
Other Evo Exercise Bike manuals
