EverFocus EDR1620 User manual
INSTRUCTION MANUAL
Digital Sixteen/Nine Channel Video Recorder
About this manual
Before installing and using this unit, please read this Manual carefully.
Be sure to keep it handy for later reference.
V 1.0
EDR1640/1620/920
Date: Sep. 30th 2005
Important Notice:
Do not remove the hard disk while machine is recording. Or
stop first before removing the hard disk.
Updated on Oct 20th, 2005
WARNING
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device,
The changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Notice:
The information in this manual was current when published. The manufacturer
reserves the right to revise and improve its products. All specifications are
therefore subject to change without notice.
Safety Warning
Note:
This is a class A product. In a domestic environment this product may cause radio interference
In which case the user may be required to take adequate measures.
2
Refer all work related to the installation of this product to qualified service
personnel or system installers.
Do not block the ventilation opening or slots on the cover.
Do not drop metallic parts through slots.This could permanently damage
the appliance. Turn the power off immediately and contact qualified service
personnel for service.
Do not attempt to disassemble the appliance.To prevent electric shock,
do not remove screws or covers. There are no user-serviceable parts
inside. Contact qualified service personnel for maintenance. Handle the
appliance with care. Do not strike or shake, as this may damage the
appliance.
Do not expose the appliance to water or moisture, nor try to operate it in
wet areas. Do take immediate action if the appliance becomes wet.
Turn the power off and refer servicing to qualified service personnel.
Moisture may damage the appliance and also cause electric shock.
Do not use strong or abrasive detergents when cleaning the appliance
body. Use a dry cloth to clean the appliance when it is dirty. When the
dirt is hard to remove, use a mild detergent and wipe gently.
Do not overload outlets and extension cords as this may result in a risk of
fire or electric shock.
Do not operate the appliance beyond its specified temperature, humidity
or power source ratings. Do not use the appliance in an extreme
environment where high temperature or high humidity exists. Use the
appliance at temperature within indoor type DVR for 0oC ~ +40oC and a
humidity below 90%.
The input power source for this appliance is AC100~240V.
Safety Precautions
Safety Precautions
3
The exclamation point within an equilateral triangle is
intended to alert the user to presence of important operating
and maintenance(servicing)instructions in the literature
accompanying the appliance.
Warning :
To prevent fire or shock hazard, do not expose units not
specifically designed for outdoor use to rain or moisture.
Safety Precautions
The lightning flash with an arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence
of uninsulated ” dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
Attention:
Installation should be performed by qualified service personnel only
in accordance with the National Electrical Code or applicable local codes.
Power Disconnect:
Units with or without ON-OFF switches have power supplied to the unit
whenever the power code is inserted into the power source; however, the
unit is operational only when the ON-OFF switch is in the ON position.
The power cord is the main power disconnect for all units.
External Power Supplies
Use only the recommended power supplies.
Power supplies must comply with the requirement of
the latest version of IEC 60065/CNS 13439. Substitutions
may damage the unit or cause a fire or shock hazard.
AC100~240V Power Cords
AC100~240V power cords
Warning:
Electrostatic-sensitive device. Use proper
CMOS/MOSFET handing precautions to avoid
electrostatic discharge.
Safety Precautions
Do not place on uneven or unstable work surfaces.
Seek servicing if the casing.
4
Important Safeguards
Read Instruction---All the safety and operating instructions should be read before the unit is operated.
Retain Instructions---The safety and operating instructions should be retained for future reference.
Heed Warnings—All warnings on the unit and in the operating instructions should be adhered to.
Follow Instructions—All operating and use instructions should be followed.
Cleaning—Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning
Attachments—Do not use attachment not recommended by the product manufacturer as they may cause hazards.
Water and Moisture—Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is
classified as a wet location.
Servicing—Do not attempt to service this unit by yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
Power Cord Protection—Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, playing particular attention to cords and plugs, convenience receptacles, and the point
where they exit from the appliance.
Object and Liquid Entry—Never push objects of any kind into this unit through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock.Never spill liquid of any kind on the unit.
Important Safeguards
5
Table of Contents
1. PRODUCT INTRODUCTION …………………………………………………………….…………
1.1 FEATURES …………………………………………………………………..…………..………….
1.2 SPECIFICATIONS…………………………………………………………………………….………
1.3 FRONT PANEL KEYPADS …………………………………………………………..…….………
1.4 BACK PANEL CONNECTORS …………………………………………………………….………
1.5 MONITOR DISPLAY ……………………………………………………………………….………
2. INSTALLATION …………………………………………………………………………….…………
2.1 PACKING LIST ………………………………………………………………………...…….………
2.2 SYSTEM FLOORPLAN ………………………………………………………..…………….………
2.3 BASIC CONNECTIONS ………………………………………..…………………….…….………
2.4 BOOT UP EDR16401620920……………………………………………..……………….………
3. MENU SETUP…………………………………………………………………………………………
3.1 TIME/DATE SETUP MENU …………………………………….……………………………….…
3.2 CAMERA SETUP MENU ……………………………………………………………………….….
3.3 RECORD SETUP MENU ………………………………………..…………………………….……
3.4 ALARM SETUP MENU ……………………………………………………………………….……
3.5 MOTION SETUP MENU ………………………………………..……………………………………
3.6 VLOSS SETUP MENU ………………………………………….…………………………….……
3.7 NETWORK SETUP MENU ……………………………………..…………………………….……
3.8 SCHEDULE SETUP MENU …………………………………………………………………………
3.9 DISK SETUP MENU ……………………………………………………………………….………
3.10 CONTROL SETUP MENU …………………………………………………………………………
3.11 WARNING SETUP MENU……………………………………………………………………….
3.12 SYSTEM SETUP MENU …………………………………………………………………….……
4. RECORDING …………………………………………………………………………………………
4.1 INSTANT RECORDING ………………………………………………………………………..……
4.2 SCHEDULE RECORDING …………………………………………………………………………
4.3 EVENT RECORDING ………………………………………………………….……………….……
4.4 ALARM RECORDING ……………………………………………………..………………………
8
8
9
11
14
17
20
20
20
21
21
22
22
26
29
31
34
38
40
44
45
46
48
52
55
55
56
56
57
6
Table of Contents
5. PLAYING BACK……………………………..……………………………………………..………...
5.1 NORMAL PLAYBACK……………….………………………………………………………………
5.2 SEARCH PLAYBACK …………………………………………………….…………………………
6. COPY TO A VIDEO FILE ………………………………………………….…………………………
7. CALL ………………………………………………………………………..……….…………………
8. SCREEN DISPLAY SETTING …………………………..………………..…………………………
9. SCREEN DISPLAY MODE ………………………………….…………….…………………………
10. REMOTE VIEWER ……………………………………..………………..…………………………
APPENDIX A: RS232 specifications …………………………………………….……………………
APPENDIX B: RS485 specifications ……………………………………………….…………………
APPENDIX C: Alarm I/O Assignment ………………………………………….…………….………
58
58
60
62
64
65
66
67
73
74
75
7
Multiplex Operation (Recording, Playback, Archiving, Remote Viewing)
Built-in MPEG4 Codec with Configurable Quality
EDR1640: Variable Recording Speeds Up to 480/400(CIF) Pictures per
second for NTSC/PAL
Audio Recording Capabilities
Motion Detection Capabilities
Two 3.5”Hot-Swap Hard Disks
SCSI Interface for External Expanded Storage
Ethernet Interface for Remote Network Viewing and Controlling
RS232/RS485 for Remote Control
Shuttle/Jog Dial for Picture-by-Picture or Fast/Slow Viewing
Easy-to-use User Friendly Control via Front panel keypad, Shuttle/Jog,
Mouse,and Control Keyboard (optional)
On-Screen Menus Operations with Multi-Language Support
Real-Time Live Display for all Cameras
USB 2.0 Interface for Archiving
1. PRODUCT INTRODUCTION
1.1 FEATURES
The Digital Video Recorder is the industry’s first full-featured digital video recorder
designed specifically for use in security industry. The Digital Video Recorder
incorporates all the benefits of digital video recording, is simple to install, and operates
just like a VCR. Highly efficient compression technology and superior resolution of
recorded images make the Digital Video Recorder stand out from the competition as the
best choice for security surveillance.
8
Support external DVD+RW for Archiving (optional)
Water Mark Capabilities
1.2 SPECIFICATIONS
9
Video Format NTSC/EIA or PAL/CCIR
Video Input 16 camera inputs (BNC), 1Vp-p/75ohm
1 BNC video out (1Vp-p/75ohm)and S-Video out for Main Monitor
1 BNC video out (1Vp-p/75ohm) for CALL Monitor
Video Output
16 video out (1Vp-p/75ohm) for Lopping
Video Compression MPEG4
720x480 (NTSC:120) / 720x576 (PAL:100)
720x240 (NTSC:240) / 720x288 (PAL:200)
Recordin
g
Resolution
& Rate 360x240 (NTSC:480) or 360x288 (PAL:400)
Video Display Full, 4,7, 9,10,13,16,PIP(Live only) and 2x2 Zoom for Live and Playback
Video Pause Yes
Alarm Input 16/9 Alarm Inputs
Alarm Output 4 Alarm Outputs
Hard Disk Storage Two Hot-Swap 3.5” IDE Hard Disk
Recording Mode Continue, Time-lapse, Schedule or Event recording (Motion, Video Loss,
Alarm)
Playback Rate Up to 60/50 Pictures per second for NTSC/PAL
Playback Search By Date/Time or Event(Alarm,Video Loss,Motion)
Motion Detection Yes, with configurable detection area & sensitivity
Video Loss Detection Yes
Event Log Yes
User Interface OSD Menu Driven
User Input Device Front panel keypad,Shutter/Jog,Mouse,Control Keyboard,
Remote Control(Optional)
Timer Built-in real time clock
Watch Dog Timer Yes
Title 12-character title generator for each camera
Ethernet RJ45 connectors for network communications
Archive USB2.0 Interface device for archive
Other manuals for EDR1620
1
This manual suits for next models
2
Table of contents
Other EverFocus DVR manuals
EverFocus
EverFocus TUTIS-16F3 User manual
EverFocus
EverFocus EDSR400H User manual
EverFocus
EverFocus ECOR 4 User manual
EverFocus
EverFocus ECOR4D User manual
EverFocus
EverFocus PARAGON 264x4-16 User manual
EverFocus
EverFocus EDR410H User manual
EverFocus
EverFocus EDSR 400F User manual
EverFocus
EverFocus EMV800 HD User manual
EverFocus
EverFocus MoniVue System ESN41 User manual
EverFocus
EverFocus DVR-100H User manual
EverFocus
EverFocus eZ.HD ECOR HD 4F User manual
EverFocus
EverFocus ECOR Series User manual
EverFocus
EverFocus EDVR16D3 User manual
EverFocus
EverFocus PARAGON264x4--32CH Series User manual
EverFocus
EverFocus EDSR-1600 User manual
EverFocus
EverFocus eDR1680 Series User manual
EverFocus
EverFocus EDSR400M User manual
EverFocus
EverFocus EMV1200 FHD User manual
EverFocus
EverFocus VANGUARD II 16x8H Plus User manual
EverFocus
EverFocus EDVR16D1/250 User manual
