EverFocus ECOR Series User manual
Instruction Manual
5
1.4 Front Panel
Your primary interaction with your new DVR will be through the Front Panel buttons and their
corresponding buttons on the included Remote Control. Take a moment to learn where the keys are as the
remainder of the manual will refer to them often.
1. USB 2.0 (front)
For connecting USB mouse or USB flash memory.
2. DVD+RW Burner
DVD+RW burner (D models only)
3. Channel Key (1~4)/(1~8)
Press channel key (CH1~CH4)/ (CH1~CH8) to display that channel in full screen view.
4. Live
Press this key to show live view. Press to exit from playback mode.
5. View
Press this key to switch between 4-screen, 9-screen, Picture In Picture, and Full-screen displays in
live and playback mode.
Note1: PIP display is not available in playback mode.
Note2: 9-screen display available in 8 Channel model only
1
2
8
9
10
11
14
15
13
12
7
6
5
4
3
6
6. SEQ
Press this key to enter the auto sequential switching mode. The sequence dwell time can be set in
“Display Setting” tab of the Menu.For more detail about SEQ, please see “5.8.2 Display Setting-
Main M/T SEQ”.
7. Search
Press this key to enter Search Menu.For more detail about Search function, please see “4.8
Search ”.
8. Fast reverse playback or step reverse playback depending on playback mode
9. Reverse playback or pause
10. Forward playback or pause
11. Fast Forward playback or step forward playback depending on playback mode
12.Enter and Arrow buttons
If you do not use a mouse, you can use these keys to change the Menu settings.
13. Copy
Press this key to enter Copy Menu.For more detail about Copy function, please see “4.7Copy”.
14. Menu
Press this key to enter/exit MAIN SETUP MENU.
15. System LEDs
LED displays for Power,Alarm,HDD and Net active.
14
3 Mouse and Front Panel Operation
ECOR series DVR supports multiple sources to control the DVR. It can be controlled with a mouse, the
front panel, an EKB500, the handheld remote control, or serial command from RS232 port.
This chapter will cover the basic operation using mouse and front panel.
3.1 General USB Mouse Operation
3.1.1 OSD Root Menu
1. Right-click the mouse to obtain DVR control bar (see Figure 3.1). When you move the mouse over each
icon, the appropriate title will be displayed on top of the control bar.
Figure 3.1
2. Click on any icon to perform that action. These actions are covered in detail in Chapter 4.
3. Click the “x” sign in the top-right corner to close the DVR control bar.
Chapter
3
15
3.1.2 Operation in Configuration Menu
The Main menu (shown in Figure 3.2) is divided into 3 main sections.
Figure 3.2 (OSD Menu)
1In section 1, there are twelve setup options available. Move the mouse over an icon to select it.
2In section 2, the main options for the selected icon will be displayed. Click on a word to select it.
3In section 3, all the details for the selected option will be available. Click on an option to make changes.
3.1.3 Component Options
The following are examples of different fields available in the Configuration menu.
Textbox:Click on the box and anon-screen keyboard will appear below it.
(For more detailsabout on-screen keyboard, please see “*Note about on-screen keyboard”).
Dropdown box:Click on the down arrow to see all selections, then
directly click on an option to select it.
1
3
2
16
Check box:Click on thebox to check or uncheck it. Checked will enable the function,
unchecked will disable the function.
Button:Click the button to execute the function.
Selection box:Click Up/Down arrow to increase or decrease the value.
Bar:Click and hold on the bar to adjust the cursor Left or Right.
*Note about on-screen keyboard:
Click on a button to input that character.
The buttons on the right and bottom have the following functions:
<- BS
Delete the previous letter
Delete
Delete the next letter
Clear
Clear box
Enter
Confirm the selection
Caps
Switch to capital letters
Space
Enter a space
<-
Move to left
->
Move to right
Cancel
Cancel and exit from the keyboard
17
3.2 General Front Panel Operation
3.2.1 Front Panel Key Review
The basic principle of front panel operation is to use navigation keys (up, down, left and right) to navigate
among the menu items. Use “Enter”key to confirm a selection or enter the next level menu. Press “Menu”
key to enter the Main Menu or exit from the current level of the menu.
3.2.2 Operation in Configuration Menu
Press “Menu”button to enter the Main Menu.
NOTE: If password is active, you will need to log in first. Refer to “4.2 Login” for information on logging in.
The menu (shown in Figure 3.3) is divided into 3 main sections.
Figure 3.3 (OSD Menu)
1In section 1, there are twelve setup options available. Use the arrow keys to highlight an icon and press
“Enter” to select it.
2In section 2, the main options for the selected icon will be displayed. Use the arrow keys to highlight an
option and press “Enter” to select it.
1
3
2
18
3In section 3, all the details for the selected option will be available here. Use the arrow keys to move
between items and press “Enter” to make changes.
Note: press “Menu”button to go back to the previous menu section.
3.2.3 Component Options
Textbox: Press Enter key and an on-screen keyboard will appear below.
(For more detailsabout on-screen keyboard,please see *Note about on-screen keyboard).
Dropdown box: Press “Enter” key to show the available options. Use the
Up/Down arrow keys to highlight the desired option and press “Enter” again to select it.
Check box: Press “Enter” key to enable or disable the setting.
Button: Press “Enter” key to execute the function.
Selection box: Press “Enter” key to select the field, then use the Up/Down arrow keys to
scroll through the desired options. Press “Enter” again to choose it.
Bar: Press “Enter” key to activate the slider, then use the Left/Right arrow keys
to adjust the setting. Press “Enter” again to finalize the changes.
*Note about on-screen keyboard:
Use the arrow keys to highlight a button and press “Enter” to input that character.
The buttons on the right and bottom have the following functions:
<- BS
Delete the previous letter
Delete
Delete the next letter
Clear
Clear box
Enter
Confirm the selection
Caps
Switch to capital letters
Space
Enter a space
<-
Move to left
->
Move to right
Cancel
Cancel and exit from the keyboard
19
4 General DVR Operations
This chapter introduces the operations on major functions including playback, layout change, sequence,
triplex operations, archive,and search.
4.1 Record
By default, the ECOR series DVR will always be in record mode. When the DVR is turned on, it will start to
record.
The exceptions are:
1. ECOR will not record any disabled cameras(Refer to section 5.3.1 for more detail)
2. If a schedule is active, ECOR will follow the record settings of the schedule.
4.2 Login
In order to access ECOR options, users will be asked to log in for authority identification. To log in, follow
these steps.
1. Click on the Menu icon or press “Menu”button to bring up the following screen:
Figure 4.1 (Login page)
Chapter
4
20
2. Input the desired user name and password. The defaults are:
User name:admin
Password:11111111
+To select a user name: click the drop down button to show the list of the users, then click the desired
user from the list.
(Using front panel: press “Enter”key to show the drop-down list. Use “Up”and “Down”key to select the
desired name, and press “Enter”key to confirm the selection.)
+To input the password by mouse: click the password field to bring up the on-screen keyboard (see Figure
4.2). Click on each button to input the desired characters for the password. When finished, click “Enter”on
the on-screen keyboard to confirm the password.
(Using front panel: press “Enter”key to show the on-screen keyboard.Use the arrow keys to highlight each
character and press “Enter”key on front panel to input the selected characters. When finished, highlight
“Enter”on the on-screen keyboard and press “Enter” key on front panel to confirm the password input.
+ Click (or press “Enter”key)on “Login” button to log in to the system.
Figure 4.2 (on-screen keyboard)
3. If an invalid user name or password is used 5 times, the DVR will give an error message and
automatically lockdown. No access will be granted for 10 minutes without the backdoor password. To
obtain the backdoor password, you will need to contact EverFocus Technical Support and give the
provided access code.
EverFocus Support by phone: 1-888-884-9154 (toll-free)
EverFocus Support email: techsupport@everfocus.com
Other manuals for ECOR Series
3
Table of contents
Other EverFocus DVR manuals
EverFocus
EverFocus ECOR264-4X1 User manual
EverFocus
EverFocus PARAGON Series User manual
EverFocus
EverFocus eIVP-CFS-IV-V0004 User manual
EverFocus
EverFocus EDSR 900F Manual
EverFocus
EverFocus eNVP-JNN-IV-V0008 User manual
EverFocus
EverFocus NVR User manual
EverFocus
EverFocus EMV401 User manual
EverFocus
EverFocus EPHD16+U User manual
EverFocus
EverFocus VANGUARD 4x2H User manual
EverFocus
EverFocus ERS-4 User manual
EverFocus
EverFocus EDR1620 User manual
EverFocus
EverFocus PARAGON 264x1 User manual
EverFocus
EverFocus VANGUARD II 16x8H User manual
EverFocus
EverFocus PowerPlex EDR1600 Service manual
EverFocus
EverFocus ECOR 264x1-16 User manual
EverFocus
EverFocus EPHD04+ HDcctv User manual
EverFocus
EverFocus PowerPlex EDR-1640 User manual
EverFocus
EverFocus EDR HD-4H4 User manual
EverFocus
EverFocus PowerPlex EDR-920 Guide
EverFocus
EverFocus EDR410H User manual
