■2 - EVENTIDE® SETTINGS
■1 - EVENMIDI® PITCHY FEATURES
1) Create your Presets
Pitchy calls 2 presets on your Eventide® :
- 1 for the Whammy® eect
- 1 for the Sequencer eect
You need to create this 2 presets as below. Save it on
your wanted preset number, then assigned it to the
Specic Midi Program Change:
2) Your Whammy preset -> Midi PC 117 Called
Algorithm: PitchFlex
Mix: 100 |PitchMix: A10 B0 |Heel-A: Unison
Heel-B: Unison |HTGLIS: Instant |THGLIS: Instant
LPF: 22 |SHAPE: 0 |TOE-A: Unison |TOE-B: Unison
Name: Whammy®
3) Your Sequencer preset -> Midi PC 118 Called
Algorithm: PitchFlex
Mix: 100 |PitchMix: A10 B0 |Heel-A: -2 oct.
Heel-B: Unison |HTGLIS: Instant |THGLIS: Instant
LPF: 22 |SHAPE: 0 |TOE-A: +2 oct. |TOE-B: Unison
Name: Sequencer
You have to set your Eventide® H9 to work properly
with the controller. Use the H9 control software is
easy to set parameters in Pedal>MIDI Settings. You
can also hold down Hotknob and Tap for 2s. then
scroll with encoder to access MIDI settings. Press the
«encoder switch» to enter menu and press «presets»
switch to return. Hold down Hotknob and Tap for 2s.
to save & exit.
4) MIDI Channel - RCV CH
Set your H9 or PitchFactor on Midi channel receive 1
for example.
5) Assign MIDI CC messages - RCV.CTL
Press Tap or Active and use encoder to set properly.
KB0-KB9 Set parameter 1-10 ►C22-C31
EXP Set expression pedal value ►BND (PitchBend)
6) Assign MIDI PC messages - RCV.MAP
Press Tap or Active and use encoder to set properly.
117 PC Number 117 ►Your Whammy Preset Number
118 PC Number 118 ►Your Sequencer Preset Number
125 PC Number 125 ►BYP (bypass the pedal)
126 PC Number 126 ►ACT (activate the pedal)
Pitchy contains a lot of cool features.
With an Eventide®H9, PitchFactor:
- Recall all Whammy® presets with only one Eventide®
Preset
With a Digitech®Whammy®4:
- Recall all whammy® presets and add the 4 «missing»
presets compared to the whammy® 5 (+5th + 4th - 4th
- 5th)
With a Digitech Whammy®5, Bass, DT:
-- Recall all whammy® presets and access to Classic/
Chords (W5) or Drop Tune (DT) menu with Encoder
switch (status = Led Mod2)
Sequencers :
- 3 sequencers type: 1/8th,1/16th, 1/12th note
- 8 presets by sequencer type
- Sequencer Editor, Test & Save
- Tap tempo
- Use global tempo or Preset Tempo
Ricochet
- Use the footswitch as an expression pedal
- Set the ricochet Up and Down speed
- In sequencer Mode, Ricochet launch only one Se-
quence if pressed one time.
Expression input type with only one TRS cable
- Expression pedal
- 3 momentary footswiches (preset+, preset-, active)
- Expression pedal + one momentary footswitch
(activate)
- EvenMidi Magic Switch (3 momentary footswitches +
Expression).Passive. Available soon.
Global
Expression pedal or Ricochet are always sent, even if
the preset is not loaded. It means you don’t have to
use several expression pedals for your others Even-
tide® presets.
Settings
Midi channel Sent (1-16)
Expression pedal Calibration
Expression input type
Eventide®H9/PitchFactor Settings
Features
