evatronic ET-BH017 User manual
USER MANUAL
ET-BH017
Questions or Concerns?
True Wireless
Earbuds
FCC ID: 2A2R7ET-BH017 IC: 28432-BH017
Deutsch 17
LANGUAGES
English 01
33日本語
EN
YOUR EARBUDS
(01-02)
SETTING UP YOUR EARBUDS
(03-04)
USING YOUR EARBUDS
(04-09)
CLEANING AND MAINTENANCE
(10)
TROUBLESHOOTING
(11-13)
CONTENTS
YOUR EARBUDS
01 Evatronic BH017 02
Evatronic BH017
Accessories
8 x Ear Tips (two are equipped on the earbuds)
USER
MANUAL
QUICK
START
GUIDE
USB-C Charging Cable User Manual Quick Start
Guide
Charging Contacts
Multifunctional Touch Control
Indicator/Mic
EN EN
Status Indicator
Charging Slot
USB-C Charging Port
Charging Case
Wearing
Power ON / OFF
Charging
1. Place the earbuds into the charging case.
2. Close the case and connect to any USB charging port with the included cable.
· Please fully charge the earbuds when using them for the first time.
· When battery is low, a “Battery low” voice prompt will be heard (if you are
wearing the earbuds). Please charge in time or the earbuds will turn off
automatically after 3-4 voice prompts.
· Charge the earbuds at least once every 3 months when not using for a long time.
Charging
Breathing White
Charged
OFF
ON
Uncover the lid
to power on.
OFF
Place earbuds back and close the
case to power off.
SETTING UP YOUR EARBUDS
USING YOUR EARBUDS
Bluetooth Caution
• Place the two devices to be connected close to each other and turn off
other Bluetooth devices.
• The maximum effective Bluetooth range may vary with the environmental
circumstances. Obstacles (walls, fences, etc.) between the two devices
may shorten the effective range.
03 Evatronic BH017 04
Evatronic BH017
EN EN
Bluetooth Pairing - Binaural Mode
ON
TaoTronics A10
1. Uncover the lid to turn on the earbuds, they will connect with each other automatically.
2. Turn on the Bluetooth function on your device and search for nearby devices.
3. Find “Evatronic BH017” in the search results, tap to connect.
Pairing
Flashing Blue & White
Connected
OFF
· Each time you power on your earbuds, they will automatically connect to your
last successfully connected device if it is available within the Bluetooth range.
· When earbuds are disconnected from your device for more than 10 minutes,
they will turn off automatically.
Bluetooth Pairing - Mono Mode
• When Bluetooth connected, you can use either one of the earbuds as per
your preference.
• Take out one earbud, and make sure the other one is placed in the case with the
lid covered.
If you want to change to binaural mode, simply take out the other
earbud from the charging case, they will pair with each other automatically.
When failed to automatically pair with Bluetooth device, you can manually
pair as instructed below without clearing pairing history.
1. Wear the earbud (must have power).
2. Press and hold Multifunctional Touch Control for over 3 seconds.
Evatronic BH017
05 Evatronic BH017 06
Evatronic BH017
EN EN
MIC ID, MIC Logo,Product name, trademark and model can be found on the user manual and
product packaging.
Controls and Functions
(L / R)
x2
Voice Assistant
Play / Pause
(L / R)
2s
Single Tap Double Tap Triple Tap Hold
x1 x2 x3
(R)
x3
Next Track
Previous Track (L)
x3
Reject
Answer
Answer Hang Up (L / R)
2s
(L / R)
x1
(L / R)
2s
(R)
x1
Volume Down Volume Up
(L)
x1
Binaural
Mode (L / R)
x2
Mono
Mode
Binaural
Mode
(L / R)
2s
Mono
Mode
07 Evatronic BH017 08
Evatronic BH017
EN EN
CLEANING AND MAINTENANCE
Reset the earbuds if they cannot connect with your device properly.
Resetting Your Earbuds
ABC-
XX
X
Evatronic BH017
1
Remove "Evatronic BH017"
from the Bluetooth device list.
2
Take the earbuds out of the
charging case.
3
Press and hold Multifunctional
Touch Control on either one of the
earbuds for 10 seconds until the
indicators on the earbuds flash
blue and white alternately.
4
Re-pair with your device as
instructed.
ON
To pair with another Bluetooth device, deactivate the Bluetooth function
on the paired device or remove “Evatronic BH017” from its Bluetooth list.
Wipe only with a dry, soft cotton swab or equivalent.
Never insert anything into the nozzle.
Wipe only with a dry, soft cotton swab or equivalent.
Remove the eartips and rinse with a mild detergent
and water.
Thoroughly dry before reattaching them to your earbuds.
• Clean the earbuds and the charging case regularly.
• Keep away from sharp objects to avoid scratches.
• Place in a dry and shady place if they are not in use for a long time.
• DO NOT clean with detergent or chemicals.
09 Evatronic BH017 10
Evatronic BH017
EN EN
Sound Help
TROUBLESHOOTING
• Deactivate the Bluetooth function of previously paired
device or remove the earbuds from the Bluetooth list and
connect again.
• Place the device to be connected close to the earbuds.
Cannot find the earbuds in the Bluetooth list :
• Place the earbuds and your device close to each other.
Move both devices away from other Bluetooth devices,
microwaves, wireless routers, and other electronics.
• Make sure the Bluetooth function is activated before pairing.
• Remove the earbuds from the Bluetooth list and
connect again.
• Reset the earbuds and pair again (see “Resetting
Your Earbuds”).
Cannot connect with your device :
• Move the device closer to the earbuds.
• Remove the earbuds from the Bluetooth list and
connect again.
• Turn off other Bluetooth devices to decrease the interference.
Intermittent Bluetooth connection :
Bluetooth
Connection
• Make sure both earbuds are paired with your device first.
• Then follow the steps to pair the single (left or right)
earbud with your device.
Cannot use a single earbud :
• Make sure the earbuds are within range of each other.
• Place both earbuds back to the charging case and then
take them out.
No sound from one earbud :
• Clear any debris from the earbud nozzles.
• Place both devices close to each other or remove the
obstacles between them.
• Try with a different audio source.
Poor sound quality :
• Check that the microphone is not blocked or covered.
• Make sure the microphone is not muted on your phone.
• Remove the earbuds from the Bluetooth list and
connect again.
Microphone does not receive sound :
Check that the microphone is not blocked or covered.
Cannot hear own voice while on a phone call :
Set the volume to a higher level.
Cannot hear caller while on a phone call :
11 Evatronic BH017 12
Evatronic BH017
EN EN
IMPORTANT SAFETY INSTRUCTIONS
Please read the instructions thoroughly before using this product
and retain it for future reference.
HEARING SAFETY
• DO NOT wear earbuds with high volume for a long time to avoid
damaging your hearing.
• Set the earbuds to low volume before you put them on, then
increase the volume gradually as per your preference.
• DO NOT set volume too high to stay aware of your surroundings.
• Please refer to local laws and regulations if you want to answer
phone calls via this device during driving.
• For your safety, avoid distraction from music or phone calls when
you are driving or doing other activities with potential dangers.
CAUTION
• DO NOT expose this product to high temperatures.
• DO NOT immerse the earbuds into water or expose them to
humidity for a long time.
• DO NOT clean the product with detergent containing alcohol,
ammonia, benzene or abrasives.
• Avoid dropping.
• Place the earbuds back into the charging case when not in use and
keep it away from children and pets to avoid choking hazard.
• Unauthorized disassembly of any parts of this product is forbidden,
which may cause fire hazard, warranty voidance, and/or property loss.
• DO NOT use the product in thunderstorm to avoid malfunction
or electric shock.
• Always ask a professional technician or authorized personnel for repair.
This product contains lithium battery. Never expose it to
excessive heat such as direct sunlight or fire to
avoid explosion.
Earbuds
Battery low. Place both earbuds back into the charging
case to charge.
Earbuds do not turn on :
• Place both earbuds in the charging case properly until
they magnetically snap into place.
• Make sure the charging case is fully charged.
Failed to charge the Earbuds :
• Make sure you are touching the correct touch
control area.
• Make sure you put on the earbuds properly.
• Make sure your fingers are dry.
• Reset the earbuds and pair again (see “Resetting Your
Earbuds”).
Earbuds do not respond to touch control :
13 Evatronic BH017 14
Evatronic BH017
EN EN
Table of contents
Languages:
