PP
PPaa
aagg
ggee
ee
22
22
Part Setting the System (using Part 1)
Up to three Part Sets may be available for your system. Please refer to
the customer details at the rear of this manual for information about
Part Set zones. Part Set zones will be omitted from the system when
that particular Part Set is used. To set the system using Part 1.
1) Press Quick followed by Part
OR
Enter a valid User Code followed by Part
2) Retire to an unprotected area.
Part Setting the System (using Part2 or 3)
Two other Part Sets may be available for your system. Part 2 is a sec-
ond set of zones that may be omitted and Part 3 will combine Part 1
and Part 2. To use Part 2 or 3.
1) Press Quick followed by 2 or 3.
OR
Enter a valid User Code followed by 2 or 3.
2) Retire to an unprotected area.
Note: Pressing the Quick key during exit will shorten the exit time
to 3 seconds.
Note: To abort the exit enter a valid User Code.
