EUROPRO Compact-Pro Joint 20 User manual

EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET - Tél : +33 (0)4 42 29 08 96 – Fax : +33 (0)4 42 53 44 36

SAS au capital de 400 000 € - RCS Aix-en-Provence B 394 961 510 - NAF 2892 Z - Intracom : FR 54 394 961 510

Compact-Pro Joint 20

Réf. 30830

User manual

Edition of 16/12/2021

More information on www.euromair.com

User manual - Compact-Pro Joint 20 202002-402A-ENGP2

You just acquired one of our

machines and all the team

of Europe Projection thanks

you for the condence

you have granted us.

Manufacturer of professional

equipments for paint and

llers, we have put our

know-how for 25 years

at the service of the

users of our machines.

Our technical & commercial

team is at your disposal

for any further information

you may need about the

machine you just acquired.

EUROPE PROJECTION

228, avenue Olivier Perroy

13790 ROUSSET

Tél : +33 (0)4 42 29 08 96

contact@euromair.com

SUMMARY

1. USER MANUAL............................................................. p. 3

1.1. Importance of the manual .........................................p. 3

1.2. Receivers of the manual............................................p. 3

2. WARNING .................................................................... p. 4

2.1. Safety .....................................................................p. 4

2.2. Electric connection ...................................................p. 6

2.3. End-of-life of the product ..........................................p. 6

3. YOUR MACHINE ........................................................... p. 7

3.1. Description..............................................................p. 7

3.2. Technical characteristics ...........................................p. 7

3.3. Identication of the components ................................p. 8

4. USE OF THE MACHINE ................................................. p.10

4.1. Prerequisites............................................................p.10

4.2. Starting up ..............................................................p.11

4.3. Error codes..............................................................p.11

5. CLEANING PROCEDURE ............................................... p.12

6. DEFECTS AND REMEDIES............................................. p.13

7. DECLARATION OF CONFORMITY ................................... p.15

8. WARRANTY CONDITIONS.............................................. p.16

202002-402A-ENG User manual - Compact-Pro Joint 20 P3

1. USER MANUAL

1.1. IMPORTANCE OF THE MANUAL

This manual is a key part for the use of your machine. It summarizes the procedures of starting-up, cleaning

and maintenance of the device and also the safety instructions you need to observe.

Read carefully all the working and safety instructions and the warnings included in this manual before

starting your machine.

Most of the accidents are caused by the non-compliance of the safety standards and rules.

This manual must be kept near the machine, within reach of the user and held in good condition until the

nal destruction of the machine.

In case of loss or deterioration of the manual, you can ask the machine manufacturer mentioned on page

4 for a copy at any moment.

1.2. RECEIVERS OF THE MANUAL

This manual is intended to any staff which will manipulate the machine :

- people in charge of the transport of the machine

- people in charge of the use of the machine

- people in charge of the cleaning and maintenance of the machine

- people in charge of the nal destruction of the machine

User manual - Compact-Pro Joint 20 202002-402A-ENGP4

2. WARNING

2.1. SAFETY

Using the machine in an incorrect way or in non-compliance of the safety instructions indicated in

this manual can cause death or serious injuries.

Read carefully all the working and safety instructions and the warnings contained in this manual

before starting your machine.

• Respect all the safety standards before running the equipment.

• Use the equipment only for the applications specied in the manual.

• Always remain alert when using the equipment.

• Transport the machine using the handles or the appropriate grips.

• During the breaks, disconnect electrically the machine.

• Run the equipment to its nominal voltage.

• Let at least 50 cm of free space between the equipment and any obstacle so that the air ow

is not blocked.

• Know how to quickly stop the equipment in case of necessity.

• Never use the equipment while it is running abnormally or it is defective.

• Do not direct a water jet or ammable liquid on the machine.

• Never direct an air jet or product jet on a person or an animal.

• Do not touch warm surfaces of the equipment.

• Always wear adequate body protections (glasses, gloves, overall and mask) and pay attention

to long hair.

• Never touch moving parts.

• Do not insert any object or the hands inside the protection grids to avoid any accident or

damage to the machine.

• For any outside job, only use appropriate extension cords.

• Maintain the equipment carefully and clean it properly after every use.

• Disconnect the equipment before any intervention.

• Avoid absolutely to unscrew any connection while the machine is under pressure.

• Check the damaged parts.

• Do not clean the plastic parts with solvant.

• In case of damage of the electric cable or the plug, do not run the machine and contact a

licensed After-Sale Service to put genuine parts instead of the defective ones.

• In case of needed After-Sale Service, always specify the machine model and its serial number.

• For any replacement of parts, only use genuine parts.

• Do not modify the machine.

• Do not cut or dismantle the protection grids.

• Do not open the electric box.

202002-402A-ENG User manual - Compact-Pro Joint 20 P5

IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL

MODIFICATION WITHOUT ADVANCED NOTICE.

2. WARNING (continued)

2.1. SAFETY (continued)

WORKSPACE

• Maintain the workspace clean and clear.

• Ambient operating temperature must be from 5°C and 35°C.

• Do not use the equipment in a potentially explosive area.

• Do not place any potentially inammable objects in close proximity to the machine.

• Take away every not qualied person from the working area of the machine, as well as children and

animals.

• In case of installation of the machine on scaffolding or a plan above ground level, attach the machine

to avoid any fall while operating.

• Do not install the equipment on an inclined surface to avoid the risks of unexpected moves or falls.

HOSES

• Always use hoses and connections adapted to the used product (genuine parts), do not try to x it.

• Do not walk on the hoses, do not bend them.

• Do not use the hoses to pull the machine.

STORAGE

• Keep the equipment in a clean and clear area in which the temperature does not exceed +35°C.

• After every use, necessarily grease the pump with a mixture of water + storage liquid to avoid it blocking

up. The storage of a not greased pump can damage it seriously.

User manual - Compact-Pro Joint 20 202002-402A-ENGP6

2. WARNING (continued)

2.2. ELECTRIC CONNECTION

The electric connection of the machine must be on a 16A - 230V plug with a differential circuit

breaker.

Before any intervention on the machine, make sure that every energy supply is cut (air and

electricity).

GROUND CONNECTOR

All the machines must be connected to the ground when they work to protect the operator from electric

shocks. Our machines are all equipped with standardized connection plugs.

Electric connection must be made by a qualied technician. It is fobidden to modify or dismantle the

machine, especially the electric box.

Repairs must be made by an authorized center or our After-sale Service.

During any intervention on the machine, make sure that the ground is well reconnected.

EXTENSION CORDS

During the use of an extension cord, make sure that it is not crushed or damaged and that it contains a

ground. Check that the section of the used extension cord is sufcient to support the machine when it is

working. A too thin extension cord can cause voltage drops or overheating of the machine.

In case of use of a cable reel, it is imperative to unwind it entirely, otherwise, the equipment can be

damaged. The section must be proportional to the length of the cord.

2.3. END OF LIFE OF THE PRODUCT

At its end-of-life, the machine must not be eliminated with the other household waste. The

uncontrolled elimination of waste can harm the environment or human health. Individuals are

invited to contact the distributor which sold them the product or to inquire with their city hall

to know where and how to get rid of the product so it can be recycled while respecting the

environment.

Under the regulation of Waste of Electrical and Electronic Equipments (WEEE), we undertake to

process the used EEEs according to the following provisions: applicable only to products on the

market since 08/13/05, under the brands EUROPE PROJECTION or VOLUMAIR, products of other

brands sold by our company (upon presentation of the corresponding invoices), products that

operate using electrical energy (for example, thermal washers or compressors do not fall into this

category).

Treatment modality

WEEE returns collected by our clients/distributors at their own expense to our collection points in

Antony (92) or Rousset sur Arc (13). Upon receipt, the products are sorted by our employees and

directed to the most appropriate processing channels.

For any further information, please contact our hotline +33 4 42 29 08 96 or conseil@euromair.com.

202002-402A-ENG User manual - Compact-Pro Joint 20 P7

3. YOUR MACHINE

3.1. DESCRIPTION

Special stone, brick, agstone grouting jobs machine, equipped with a stainless steel tank.

Easy and quick start-up an cleaning, due to its drain plug and quick-disassembly pump.

3.2. TECHNICAL CHARACTERISTICS

Product pressure 0 to 20 bar

Product ow-rate 0 to 20 kg/min

Motor power 1,5 kW

Power supply 230 V - 16 A - 50 & 60 Hz

Integrated compressor no

Tank capacity 100 L

Maximum grain size 3 mm

Pump MAP 6

Dimensions (L x w x h) 115 x 65 x 73 cm

Weight 105 kg

Delivered with

- a Ø25 mm x 10 m product hose

- a carry-case containing:

• an ABS contact spray-lance

• three grouting nozzles (Ø10, 12 and 14 mm)

• a cleaning balls and a tube brush

• a cleaning brush

• an unplugging brush

• a 7 mm Allen key

Do not use solvant based products, products with a grain thicker than 3 mm...

A B

E D

User manual - Compact-Pro Joint 20 202002-402A-ENGP8

3. YOUR MACHINE (continued)

3.3. IDENTIFICATION OF THE COMPONENTS

AProduct outlet

BRotor / Stator

CManometer

DLance

ENozzle

FDrain plug

GAutomatic lubricator

HControl panel (see next page)

1L1 L4

3 X2 L2L3

AU J4 5 K

202002-402A-ENG User manual - Compact-Pro Joint 20 P9

3. YOUR MACHINE (continued)

3.3. IDENTIFICATION OF THE COMPONENTS (continued)

JMotor speed display in % KNetwork voltage display

1Start / Stop L1 Power on light

2Choice of MANUAL or AUTOMATIC mode L2 MANUAL process light

3Runs the pump backwards L3 AUTOMATIC process light

4Increase the motor speed L4 Backwards running light

5Decrease the motor speed AU Emergency stop

XNot used on this model

User manual - Compact-Pro Joint 20 202002-402A-ENGP10

4. USE OF THE MACHINE

4.1. PREREQUISITES

• The electric connection has to be 230 V - 16 A - 50 or 60 Hz with a 3 x 2,5 mm² cable reel of 40m

maximum, completely unreeled.

• One push on the MANU/AUTO button (2) makes the pump start working and the (L2) light lights up.

• One push on the button REVERSE (3) makes the product pump turn in reverse mode and the light (L4)

lights up.

• In AUTO mode, the pump starts only at the opening of the lance.

• In MANU mode, the pump works continuously.

• After a prolonged standstill, it is possible that the pump might be blocked. If this is the case, alternately

turn the pump forwards and backwards for 5 second sequences. As soon as the engine starts to turn

normally, the pump is unblocked.

• Check every month that the machine’s automatic lubricator is working properly. The level of grease in the

cartridge should decrease steadily. The absence of grease can seriously damage the machine.

PRESSURE VALUES:

- Ready-to-use product: from 12 to 15 bars

- Traditional product: from 5 to 8 bars

PRESSURE CONTROL AND ADJUSTMENT: (at least once a week)

• Install the pressure controller on the machine outlet with the valve in the open position.

• Put water in the tank.

• Switch the machine on (button (1)).

• Set the machine to 100% using buttons (4) & (5).

• Press MANU/AUTO (2), the machine starts.

• Close the controller valve and read the value on the manometer (C).

• Adjust the desired value with the 3 pump screws (tighten from the external screw to the screw on the

tank side, equally).

• Adjust by closing the valve and reading the manometer (repeat the adjustment operation until the

correct pressure is obtained).

Never use petroleum-based products in the pump, as they may damage it.

Never run the pump without water or product.

It is imperative to replace the automatic motor ange lubricator (G) every 6 months.

This manual suits for next models

Table of contents

Other EUROPRO Paint Sprayer manuals

EUROPRO

EUROPRO Minijet 80 110 V User manual

EUROPRO

EUROPRO Compact-Pro 55 User manual

EUROPRO

EUROPRO JETPRO 80 User manual

EUROPRO

EUROPRO X-PRO E70 User manual

EUROPRO

EUROPRO Mini-Sandblaster 10L User manual

EUROPRO

EUROPRO MIXPRO 14 User manual

EUROPRO

EUROPRO 4P User manual

EUROPRO

EUROPRO JETPRO 100-7 User manual

EUROPRO

EUROPRO EUROHVT1 User manual

EUROPRO

EUROPRO Jetmix 100-70 User manual

EUROPRO

EUROPRO AC-65-G User manual

EUROPRO

EUROPRO COMPACT-PRO 60 User manual

EUROPRO

EUROPRO DropPro 30P User manual

EUROPRO

EUROPRO 150TH-V User manual

EUROPRO

EUROPRO Compact-Pro 30 User manual

EUROPRO

EUROPRO Compact-Pro 70 User manual

EUROPRO

EUROPRO AC-50-G User manual

EUROPRO

EUROPRO Compact-Pro 120 User manual

EUROPRO

EUROPRO Compact-Pro Joint 10 User manual

EUROPRO

EUROPRO EUROPROPULVE V5 User manual

EUROPRO

EUROPRO Eurospray S User manual

EUROPRO

EUROPRO MINIJET 80 User manual

EUROPRO

EUROPRO JETPRO 100-7 User manual

EUROPRO

EUROPRO 4P User manual

Popular Paint Sprayer manuals by other brands

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Operator's manual

Graco

Graco 246737 Repair and parts

Binks

Binks SV100 Service manual

Fimco

Fimco LG-4-3-1 owner's manual

AG SPRAY

AG SPRAY FS-ATV-25BL owner's manual

Nordson

Nordson MicroMax 2 manual

Bonide

Bonide 051 Operation and service instructions

zogics

zogics Z-DAS instruction manual

KISANKRAFT

KISANKRAFT KK-KBS-165 Operation manual

Matrix

Matrix SG 650 Translation of the original instructions

Anest Iwata

Anest Iwata SGA-3 Installation, use & maintenance instruction manual

paasche

paasche VV Instructions and parts list

Carlisle

Carlisle DeVilbiss JGA-510 Service manual

Gardena

Gardena 11120 Operator's manual

Conrad

Conrad Hobby Airbrush K3 operating instructions

wiwa

wiwa 14025 R/F operating manual

Graco

Graco EM 390 Instructions-parts list

DeVilbiss

DeVilbiss LUNA2i Operation manual