Euhomy CFL-18 User manual
Email：support@euhomy.com Facebook：@Euhomy.Official
Car Refrigerator
SKU：CFL-18/CFL-25
Instruction Manual
Congratulations
Dear Customer:
Welcome to the Euhomy family. Thank you for purchasing one of our products.
Email: [email protected]
Facebook: Euhomy.Official
If you experience problems, you may refer to the Troubleshooting section. Or send an email to
Our mission:
* To be the most trusted appliance brand.
* To create practical, compact appliances that better your life.
Be sure to register at
www.euhomy.com/register
for updates, warranty, and other relevant information.
Our goal is to provide you with superior service. If there is anything missing from or wrong with
your order, or if you have any questions about using our product, PLEASE contact us.
The Euhomy team is available 24/7 to address your questions, comments, and concerns. Your
satisfaction is our ultimate goal. We want to make everything right so you'll share your positive
experience with other shoppers on Amazon.
Contents
Brief operating instructions 05-06
Precautions for use 04
01
Product function introduction 02
Product safety 03
Cleaning and maintenance 06
Error code descriptions 07
Frequently asked questions 08
Technical parameters 09
Standard packing list 09
Product Function Introduction
High-quality DC variable-frequency compressor and drive module make for a
high-efficiency, energy-saving, stable, and reliable mobile refrigeration system.
Microcomputer intelligent control system with accurate temperature control is easy to use.
Compatible with a variety of power inputs. Intelligent recognition of DC 12/24V voltage
adapts to different settings as needed: car, marine, home, or outdoor use.
Voltage-detection and low voltage-protection functions effectively prevent your car battery from
draining.
The inner compartment is made of high-grade plastic, which is safe, leakproof, and odor-resistant.
Intelligent-touch control buttons and child-lock function to prevent the danger to children.
02
03
Product Safety
Do not touch an exposed power cord with your hands.
Do not let water touch the power inlet or control panel. This may cause short circuit or danger.
When using this product during the travel, please make sure that the power supply lines and fuses
have enough carrying current.
Make sure the power connection is correct.
Do not immerse this product in water.
Do not put canned or bottled drinks into the refrigerator for low-temperature freezing.
Do not place any electrical equipment in the refrigerator.
Only professional personnel are authorized to perform maintenance or service. Or please contact
your seller.
Do not expose the product to rain or strong sunlight for a long time.
After receiving and unpacking the refrigerator, please let it stand on a flat, level surface for at least
6hours before powering it on.
04
Precautions For Use
When using the refrigerator, please place it in a well-ventilated area that is conducive
to heat dissipation. In particular, the gap between the cooling vent on the compressor side
and other objects must be greater than 3.93inch, so as to prevent heat buildup from
causing failure or impairing the refrigeration effect.
Do not keep the door open for a long time. Warm air will cause frost to form later and will impair
the refrigeration effect.
Do not clean the refrigerator by immersing it in water or pouring water over it.
Do not use the refrigerator near heat sources as these will reduce the refrigeration
performance of the refrigerator.
Do not let the refrigerator run for a long time while it is on a steep incline. To do so may affect the
service life of the refrigerator and reduce the refrigeration efficiency.
Please use the product at an air or room temperature between 32 °F and 113 °F.
Precautions for basic use:
Temperature control range: -4℉to 68℉(-20℃to 20℃)
Temperature display range: -22℉to 104℉(-30℃to 40℃)
Standard voltage input range: DC 12V/24V, maximum not exceeding DC 30V
CHILD LOCK
TEMP UP TEMP DOWN
SET ON / OFF
DISPLAY
05
Brief Operating Instructions
1. Refrigerator opening and closing:
Connect the correct DC 12/24V power supply. If the refrigerator is in standby mode, press
and hold the power button for 2 seconds to complete the startup. After startup, the display
will normally display information such as the current temperature and working mode of the
compressor. After the startup delay (1 minute preset by the factory), the refrigerator runs in
operating mode and the compressor starts refrigeration.
2. Control panel locking and unlocking:
If the control panel is locked (the Child Lock icon in the lower right corner of the display is on),
press and hold the up arrow and down arrow simultaneously for 2 seconds to release the lock. If
the Child Lock icon is not on and there is no operation for 20 seconds, the control panel will
automatically enter the locked state.
3. Refrigerator temperature setting:
When the keyboard is unlocked, press the up arrow or down arrow to adjust the temperature
of the refrigerator by 1 degree. (A group of temperature values on the display screen will flicker to
display the current setting value.) If you hold either arrow button, you can quickly set the desired
temperature value. If there is no change within 5 seconds, the set value will be saved automatically.
Press and hold the Settings button for 2 seconds. The temperature indicator will blink. You can
select the temperature unit with the up and down arrow buttons.
4. Compressor operating mode setting:
When the control panel is unlocked, press the Set button to switch the compressor working
mode between Eco and Max. If you need to quickly cool to a lower temperature, switch to the Max
mode. If you only need to refrigerate or store items that are already cool, you can set the Eco mode
to save power.
5. Low voltage-protection function setting:
This product has a low voltage-protection function. When it detects that the battery
voltage is lower than the set value, it will automatically turn off the compressor to avoid damaging
the battery or preventing the car from starting normally. At this time, the display screen will display
code E1. If the voltage returns to normal, the refrigerator will automatically enter its working state
within 1 minute. The factory default is M (medium). If you need to change it, please follow these
steps:
a. Unlock the control panel.
b. Long-press the Set button for 6 seconds. Release it after you hear a beep. Then press the Set
button for a short time. At this time, one of the battery protection-level icons (V, V=, V=) on the
display will flash. Press the up or down arrow to change the set specific value.
This manual suits for next models
1
Table of contents
Other Euhomy Refrigerator manuals
