eufy Security EUFYCAM 2C User manual
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries. All other trademarks are the property of their respective owners.
51005002533 V03
QUICK
START GUIDE
EUFYCAM 2C
WIRE-FREE HD SECURITY CAMERA SET
EN 01
TABLE OF
CONTENTS
Getting started 02
Product overview 03
Connecting the homebase 2 04
Setting up the system 05
06 Mounting the camera
10 Charging eufycam2c
11 Satety statement
English 01
Deutsch 14
Español 26
Français 38
Italiano 50
Nederlands 52
Portuguese 74
Δϳ˶Α˴έ˴όϟ 86
02 EN EN 03
GETTING
STARTED
For HomeBase 2 installation
HomeBase 2
(T8010X) PowerAdapter
for HomeBase 2 Ethernet
Cable Metal Pin
for Resetting
For eufyCam 2C installation
eufyCam 2C
(T8113S) Micro-USB
Charging Cable Mounting
Bracket Mounting Screws
andAnchors
1.Camera quantity and accessories vary by bundle package.
2.HomeBase 2 power adapter varies by region.
PRODUCT
OVERVIEW
HomeBase 2
2
3
4 5 6
7
1
1.Status LED 5.Ethernet port
2.Speaker 6.SYNC/ALARM OFF button
3.Power port 7. Reset button
4.USB port
eufyCam 2C
3
21
5
4
6
10
9
8
7
1.Lens 5.Spotlight 9.Charging port
2.Light sensor 6.Status LED 10.Speaker
3.Microphone 7.SYNC button
4.Motion sensor 8.Mounting hole
04 EN EN 05
CONNECTING
THE HOMEBASE 2
Connect the HomeBase 2 to the Internet
1. Power on the HomeBase 2,then use the ethernet cable provided to
connect the HomeBase 2 to your home router.
2. The LED indicator turns blue (this may take up to 1min) when
HomeBase 2 is ready for setup.
SETTING UP
THE SYSTEM
Download the App and Set up the System
Download the Eufy Security app from theApp Store (iOS devices) or
Google Play (Android devices).
Sign up for a Eufy Security account,then follow the onscreen
instructions to complete the setup.
06 EN EN 07
MOUNTING
THE CAMERA
Find a Good Mounting Spot
8S½RHEWTSXXSQSYRXIYJ]'EQ']SYRIIHXSXIWX[MVIPIWWWMKREPWXVIRKXL
①Open the Eufy Security app,go to Camera Settings > Mounting Guide.
②To test the wireless signal strength,take your camera and phone to the
location where you want to mount the camera.
③Move the camera as close to the HomeBase 2 as possible if the
wireless.
Select Height and Location
Hang eufyCam 2C 7-10 ft (2-3 m) above the ground.This height
maximizes the detection range of the motion sensor of eufyCam 2C.
Avoid placing eufyCam 2C under direct sunlight.
Up to 30 ft (10 m)
7-10 ft
(2 - 3 m)
'EQIVE½IPH
of view
Motion
Detection
Zone
08 EN EN 09
Mount the camera
The camera can be mounted both indoors and outdoors.
1. Turn the knob of the mounting bracket clockwise to loosen and
disassemble it.
2. Drill holes with a 15/64 inch (5.95mm) drill bit,then insert the
anchors into the holes;anchors are necessary for walls that are
made out of hard materials such as concrete,brick,or stucco.
Mount the camera
3. Firmly screw the base of the mounting bracket onto the wall.Fasten
the ball knob of the bracket to the base of the bracket.
4. Tighten eufyCam 2C to the mounting bracket and adjust the viewing
angle by checking the live stream feed in the Eufy Security app.
Tips:
1. The Homebase 2 pairs up to 16 cameras, you can repeat the steps mentioned
above to add more eufyCam 2C cameras to meet different needs of use.
2. For troubleshooting,check Help on the Eufy SecurityApp.Refer toApp page for
LED indicator status.
10 EN EN 11
CHARGING
EUFYCAM2C
Charge eufyCam 2C
Method 1
Method 2
5V USB Charger
LED indication
Charging time 5 hours
Fully charged:Off
Charging:Steady blue
NOTICE
FCC Statement
This device complies with Part 15 of the FCC
Rules.Operation is subject to the following two
conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any
interference received,including interference that
may cause undesired operation.
Warning: 'LERKIWSVQSHM½GEXMSRWRSX
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
Note:This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of
the FCC Rules.These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate
radio frequency energy and,if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.However, there is no guarantee
that interference will not occur in a particular
installation.If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on,the user is encouraged
to try to correct the interference by one or
more of the following measures:(1) Reorient or
relocate the receiving antenna.(2) Increase the
separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.(4) Consult the dealer or an
experienced radio/TV technician for help.
FCC Radio Frequency Exposure
Statement
The device has been evaluated to meet general
RF exposure requirements.The device can be
YWIHMR½\IHQSFMPII\TSWYVIGSRHMXMSR8LI
min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices
must be made using shielded cables to maintain
compliance with FCC regulations.
The following importer is the responsible party:
Company Name: POWER MOBILE LIFE, LLC
Address:10900 NE 8th St, Ste 501,Bellevue
WA 98004
Telephone:1-800-988-7973
This product complies with the
radio interference requirements of the
European Community.
Declaration of Conformity
Hereby,Anker Innovations Limited declares that
this device is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU.For the declaration of
conformity,visit https://uk.eufylife.com/
This product can be used across EU member
states.
Due to the used enclosure material, the product
shall only be connected to a USB Interface
of version 2.0 or higher.The adapter shall be
installed near the equipment and shall be easily
accessible.
12 EN EN 13
Do not use the Device in the environment at
too high or too low temperature, never expose
the Device under strong sunshine or too wet
environment.
The suitable temperature for HomeBase 2 and
accessories is -10°C-45°C.
The suitable temperature for eufyCam 2C and
accessories is -20°C-50°C.
When charging, please place the device in an
environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an
environment with a temperature that ranges
from 5°C~25°C.
Please ensure to use only the charger offered by
the manufacturer. Using unauthorized charger
may cause danger and violate the authorization
of the device and the guarantee article.
This charger is for indoor use only.The charger
type is KA 2401A-1202000DE,output voltage/
current is 12Vdc/2A.The plug considered as
disconnect device of adapter.
RF exposure information:The Maximum
Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm
between the device and the human body.
To maintain compliance with RF exposure
requirement,use product that maintain a 20cm
distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECTTYPE.
DISPOSE OF USED BATTERIES ACCORDING
TOTHE INSTRUCTIONS.
SUB-1G Frequency Range (forT8010X):
866~866.8MHz;Sub-1G Max Output Power
(forT8010X): 5.24dBm (ERIP)
Wi-Fi Operating Frequency Range:
2412~2472MHz;Wi-Fi Max Output Power:
18.40dBm (ERIP forT8010X), 18.83dBm (ERIP
forT8113S)
The following importer is the responsible party
(contact for EU matters only)
Anker Innovations Deutschland GmbH I Georg-
Muche-Strasse 3, 80807 Munich,Germany
This product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should
be delivered to an appropriate collection
facility for recycling.Proper disposal and
recycling helps protect natural resources,
human health and the environment.
For more information on disposal and
recycling of this product,contact your
local municipality,disposal service, or the
shop where you bought this product.
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s).Operation is
subject to the following two conditions:
(1) this device may not cause interference,and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device."
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi,même si le
brouillage est susceptible d'en compromettre le
fonctionnement."
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product,maintain a distance of 20cm from the body to ensure compliance with RF
exposure requirements.
0SVWHIPYXMPMWEXMSRHYTVSHYMXQEMRXIRI^YRIHMWXERGIHIGQHYGSVTWE½RHIZSYWGSRJSVQIV
aux exigences en matière d'exposition RF.
This product complies with the radio interference requirements of the United Kingdom.
Declaration of Conformity
Hereby,Anker Innovations Limited declares that the product is in compliance with Radio Equipment
Regulations 2017.The full text of the UK declaration of conformity is available at the following internet
address:https://uk.eufylife.com
AnkerTechnology (UK) Ltd I Suite B,Fairgate House,205 Kings Road,Tyseley,Birmingham, B11 2AA,
United Kingdom
14 DE DE 15
IM LIEFERUMFANG
ENTHALTEN
Für die HomeBase 2-Installation
HomeBase 2
(T8010X) Netzteil für
HomeBase 2 Ethernet-
Kabel
Metallstift zum
Zurücksetzen
Fpr eufyCam 2C-Installation
eufyCam 2C.
(T8113S) Mikro-USB-
Ladekabel Montage-
halterung Befestigungsschrau-
ben und Dübel
1.Die Anzahl der Kameras und Zubehörteile variiert je nach Angebotspaket.
2.Das HomeBase 2-Netzteil ist je nach Region unterschiedlich..
INHALTSVERZEICHNIS
Im Lieferumfang enthalten 15
Produktübersicht 16
Anschliessen an HomeBase 2 17
Einrichten des Systems 18
19 Montieren der Kamera
23%Y¾EHIRHIVIYJ]'EQG
24 Hinweis
16 DE DE 17
PRODUKT-
ÜBERSICHT
HomeBase 2
2
3
4 5 6
7
1
1.Status-LED 5.Ethernet-Anschluss
2.Lautsprecher 6.SYNC/ALARMAUS-Taste
3.Stromversorgungs-Anschluss 7.Reset-Taste
4.USB-Anschluss
eufyCam 2C
3
21
5
4
6
10
9
8
7
1.Objektiv 5.Spotlight 9.Ladeanschluss
2.Lichtsensor 6.Status-LED 10.Lautsprecher
3.Mikrofon 7.SYNC-Taste
4.Bewegungssensor 8.Montagebohrung
ANSCHLIESSEN
AN HOMEBASE 2
HomeBase 2 mit dem Internet verbinden
1. Schalten Sie die HomeBase 2 ein und schließen Sie sie über das im
Lieferumfang enthaltene Ethernet-Kabel an Ihren Heimrouter an.
2. Die LED-Anzeige leuchtet blau,wenn die HomeBase 2 bereit für die
Einrichtung ist (dies kann bis zu 1 Minute dauern).
Other manuals for EUFYCAM 2C
2
Table of contents
Languages:
Other eufy Security Digital Camera manuals
eufy Security
eufy Security eufyCam 2 Pro User manual
eufy Security
eufy Security FLOODLIGHT CAM 2 PRO User manual
eufy Security
eufy Security eufyCam S330 User manual
eufy Security
eufy Security SoloCam C210 User manual
eufy Security
eufy Security T8151 User manual
eufy Security
eufy Security CAM 2C User manual
eufy Security
eufy Security T8424 User manual
eufy Security
eufy Security T8400 User manual
eufy Security
eufy Security S300 User manual
