EtherWAN EX63000 Series | User manual
W70G-EX630V2Q2 Page 1
Installation Guide
EX63000 Series | Hardened Managed Switch
Copyright 2023 EtherWAN Systems, Inc. All Rights Reserved 03/06/2023
1Unpacking
Unpack the items. Your package should include:
One EX63000 Series hardened managed switch
If items are missing or damaged, notify your
EtherWAN representative. Keep
the carton and packing material.
The full product manual can be
downloaded from:
www.etherwan.com
2Equipment Needed
▪Appropriate cables for data ports
▪Personal computer or laptop
3Select a Location
▪Installation: DIN rail, wall mount, rack, or cabinet.
▪Identify a power source within 6 ft. (1.8m).
▪Choose a dry area with ambient temperature
between -10 and 60°C (14 and 140ºF).
▪Be sure there is adequate airflow.
▪Keep the switch at least 6 ft. (1.83m) away from
the nearest source of electromagnetic noise, such
as a photocopy machine.
▪Switch is designed for use in Pollution Degree 2
Environment.
4Connect to the Data Ports
Depending on the model, your switch can have the
following ports:
▪16 10/100Base-TX ports
▪0 or 2 Gigabit ports
10/100Base-TX Ports
These ports come in 10/100Base-TX interfaces. They
can connect to devices such as an IP surveillance
camera or a Voice over Internet Protocol (VoIP)
phone.
Gigabit Ports
Some switch models have 10/100/1000Base-TX
ports with no Gigabit fiber ports, or combo
10/100/1000Base-TX with 1000Base-SX/LX/BX
ports.
Combo ports on the bottom face operate in
“either/or” fashion. This means that attaching to a 1
Gbps combo port renders the equivalent partner
combo port unavailable.
5Apply Power
The switch has a 12-48VDC terminal block. Only one
power input is required to operate the switch.
However, redundant power supply functionality is
supported.
Terminal Block
The switch provides two power inputs on a 12-
48VDC terminal block. Only one power input is
required to operate the switch. The terminal block
has 5 terminal posts.
Combo Ports
W70G-EX630V2Q2 Page 2
Installation Guide
EX63000 Series | Hardened Managed Switch
Copyright 2023 EtherWAN Systems, Inc. All Rights Reserved 03/06/2023
Pin
Description
Power 2
+
12-48VDC
−
Power Ground
Power 1
+
12-48VDC
−
Power Ground
Earth Ground
Relay Output Rating
0.6A @ 30VDC
Power-Up Sequence
When you apply power, all Link/ACT LEDs will light
up, and stay lit as the device boots up. When the
boot process is finished, only LEDS next to
connected ports will stay lit.
The Power 1/2 LEDs will light up to show the
connected power inputs.
Relay Output
The switch is equipped with a 3-point relay output.
Current is 30VCD / 0.6A
Relay Status
Normally closed
Normally Open
No Power
Closed
Open
Normal
Open
Closed
Abnormal
Closed
Open
6Front Panel LEDs
LED
Color
Status
Power1
Power2
Green
ON = power on.
OFF = power off.
10/100Base-TX LEDs
Link/Act
Green
ON = valid network
connection is established.
Flashing = port sending or
receiving data.
10/100/1000Base-TX LEDs
Link/Act
Green
ON = valid network
connection is established.
Flashing = port sending or
receiving data.
1000Base-SX/LX/BXLEDs
Link/Act
Orange
ON = valid network
connection is established.
Flashing = port sending or
receiving data.
7Managing the Switch
Connect a PC to an available switch port using an
appropriate cable.
Confirm that the Link/ACT LED for the switch port
to which the PC is connected is ON. If not, choose a
different port.
Configure the PC’s TCP/IP settings to use the subnet
192.168.1.Xand subnet mask 255.255.255.0, where
Xis a number from 2 to 254 other than 10.
In a Web browser address bar, type
http://192.168.1.10 and press Enter.
Log in to the management interface. Default
username is root, no password.
Manufacturer information:
EtherWAN Systems, Inc.
33F, No. 93, Sec. 1, Xintai 5th Rd., Xizhi Dist., New
Taipei City, 221 Taiwan
The full product manual can be downloaded from:
www.etherwan.com
Other EtherWAN Switch manuals
EtherWAN
EtherWAN EX77964 User manual
EtherWAN
EtherWAN EX46900A Series User manual
EtherWAN
EtherWAN EX26262F User manual
EtherWAN
EtherWAN EX34000 User manual
EtherWAN
EtherWAN EX17162A User manual
EtherWAN
EtherWAN EX75000 User manual
EtherWAN
EtherWAN EX41941F User manual
EtherWAN
EtherWAN EX42908 series User manual
EtherWAN
EtherWAN EX78162 Series User manual
EtherWAN
EtherWAN EX17008A User manual
EtherWAN
EtherWAN EX78900 Series User manual
EtherWAN
EtherWAN EG97000 Series User manual
EtherWAN
EtherWAN EX16908 User manual
EtherWAN
EtherWAN EX19162A User manual
EtherWAN
EtherWAN EX42905 Series User manual
EtherWAN
EtherWAN EX32908 series User manual
EtherWAN
EtherWAN EX19162 User manual
EtherWAN
EtherWAN EX48000A Series User manual
EtherWAN
EtherWAN EX61000A User manual
EtherWAN
EtherWAN EX41941 User manual
