Etac IM99999 User manual
2
3
Illustration 1 Illustration 2
Illustrations
Illustration 3 Illustration 4
2
3
3
Heading Page
1. General/Features ..................................................................................4
2. Practical handling.................................................................................5
3. Handling/Materials/Cleaning ................................................................6
4. Size/Combinations ...............................................................................7
Contents
4
5
General
Features
Autoturn is specially developed for use with car seats to
make it easy to enter and exit a vehicle.
The two nylon sides facing each other reduce friction dur-
ing turning.
The down part of the Autoturn pillow has a non-slip sur-
face, to ensure that the device rests firmly on the car seat.
Autoturn is fastened to the seat back.
Autoturn features a functional handle which a carer can
use to pull the client into place on the car seat.
Thank you for choosing an Etac product.
To avoid accidents and injury when moving and handling
the products, read the manual carefully.
The person described as "the client" in this user manual is
the person who is lying or sitting on the product. The carer
or carers are the people who manoeuvre the product.
The products comply with the standards applicable for
Class 1 products in the European Council Directive MDD
93/42/EEC on medical devices.
This symbol appears alongside the text in
the manual. It draws the reader's attention
to points at which there may be a risk to the
health and safety of the client or carer.
At Etac we strive to improve our products all the time and
therefore we reserve the right to make changes to prod-
ucts without prior warning. All measurements given on
illustrations and similar material are for guidance only and
Etac cannot be held liable for errors and defects.
The information given in this manual, including recom-
mendations, combinations and sizing, does not apply to
special orders and modifications. If the customer makes
adjustments, repairs or combinations not predetermined
by Etac, the Etac CE certification and Etac warranty will
be voided. If in doubt, please contact Etac.
Warranty: Two-year warranty on material and manufac-
turing defects, provided that the product is used correctly.
For further information on the Etac transfer range, see
www.etac.com.
The product can be scrapped in accordance with national
regulations.
Washing
Handwash
Wipe off
Tumbledry
Iron
Do not dryclean
Do not bleach
Risk of sliding down
Never leave on the floor
Warning
Read the User Manual
Batch no./Lot no.
Max. weight
The product can be
scrapped in accordance
with national regulations
Manufacturer
Class 1 - European Council
Directive MDD 93/42/EEC
on medical devices
4
5
5
Use
Positioning
Position the Autoturn centrally on the car seat.
Fit the straps, fasten and tighten securely at seat back.
Fit the functional locking system (next to the functional
handle) to the safety belt. When the client turns in the
seat, the belt will automatically glide slightly forward.
The safety belt can be secured on the opposite side using
the functional locking system (Illustration 4).
Use
The client seats him/herself on the centre of the Autoturn.
The client then raises either both legs simultaneously or one
leg at a time inside the vehicle, thus turning the body inside
the car (Autoturn is also perfect for turning the client inside
the vehicle) (Illustrations 1,2 and 3). This avoids unneces-
sary strain on the body. The carer can pull on the functional
handle to help the client glide into place.
To exit the car, the client swings the legs out of the vehicle,
preferably in stages, before raising him/herself to the stand-
ing position.
6
7
Remember to use the client's resources.
For optimal turning effect, make sure that the client is
seated in the middle of Autoturn.
Never leave an Autoturn on the floor.
To ensure that the client feels safe and that every manual
handling is smooth, always plan the manual handling in
advance.
If in any doubt - please contact Etac.
Use
Always check the product before use and after washing.
Never use a defective product. If the product shows signs
of wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual
handling.
Etac offers advice and training for carers.
For further information, contact Etac.
Always used the correct manual handling techniques.
Special features
Top side: Polyester velvet.
Inner surface: 100% nylon.
Backside: 100% non-slip.
Materials
6
7
7
The product should be checked regularly, preferably each
time it is used.
Check that seams and fabric are not damaged.
Never try to repair a product yourself. Never use
a defective product.
Washing instructions:
Can be wiped with a damp cloth.
Cleaning
Articles
Article no. Description Size (cm)
IM99999 Autoturn Ø45
This manual suits for next models
1
Other Etac Mobility Aid manuals
Etac
Etac Clean 24" User manual
Etac
Etac Molift Raiser Pro User manual
Etac
Etac Molift Partner 255 User manual
Etac
Etac Molift EvoSling Shadow User manual
Etac
Etac E-Board User manual
Etac
Etac Hi-Loo User manual
Etac
Etac 2Move User manual
Etac
Etac Raiser Pro User manual
Etac
Etac Cloo User manual
Etac
Etac immedia 4WayGlide NylonSheet User manual
Etac
Etac Clean 24" User manual
Etac
Etac Pediturn User manual
Etac
Etac IM34/8 User manual
Etac
Etac immedia IM130DR User manual
Etac
Etac Mustang R82 User manual
Etac
Etac immedia MultiGlide User manual
Etac
Etac immedia MultiGlide Single Patient Use User manual
Etac
Etac Molift RgoSling User manual
Etac
Etac molift MRS Duo Flex User manual
Etac
Etac Molift MRS Quattro User manual
Popular Mobility Aid manuals by other brands
Rhythm Healthcare
Rhythm Healthcare B3800F manual
AMF-BRUNS
AMF-BRUNS PROTEKTOR installation manual
Drive DeVilbiss Healthcare
Drive DeVilbiss Healthcare OTTER Instructions for use
Rhythm Healthcare
Rhythm Healthcare C500U Assembly and Fitting Instructions
Lumex
Lumex RJ4200A manual
Rebotec
Rebotec Jumbo user manual