4 NA-K 45603-52-01
1. General safety notes
The device must be used only by persons who have been instructed in its
handling and are explicitly authorized to use it. No aggressive gases may be
exhausted. Make sure that the power cable does not become damaged by being
run over, compressed, pulled, etc. The power cable must be examined regularly
for signs of damage or ageing. When replacing electrical parts and cables, only
original ESTA replacement parts must be used. Work on electrical parts,
including replacement of electrical cables, must be performed only by electrical
experts or people trained for the purpose. When operating a device, use only
original ESTA accessories. Connecting extension cords, coupling devices, etc.,
is not permitted.
Exhausting or dust removal from machines and/or workplaces that
produce aluminium or magnesium dust is not permitted.
According to work equipment user directive 2009/104/EEC, safety devices
for prevention or removal of hazards must be regularly maintained and
inspected by an expert for safe, flawless operation.
2. Preventing mechanical hazards
All movable machine parts driven by electric motors must be covered by securely
fastened protective covers that can be removed only with tools.
If a covering that can only be unfastened with tools is removed, there is risk
of injury if the machine is running.
3. Preventing electrical hazards
All electrical parts must be covered by fixed, securely fastened protective covers
that can be removed only with tools. The device complies with Protection Class I
according to EN 60 204.
Residual risk:
If a covering that can only be unfastened with a tool is removed, a hazard is
posed by electric current.
The power cable (H07RN – F5G2.5... metres long with CEE 32 A plug) must be
replaced only by an authorized electrical specialist.
The power separator (plug) must be activated only when it is shut off.
