Esky ES610 Installation and maintenance instructions

ESKY WIRELESS INC.

2013

ES610

Getting Start Manual

V1.2

22-303,328 XINGHUSTREET,SUZHOU,CHINA

sales@eddywireless.com

Catalogue

Version history..................................................................................................................................3

1. Structure Introduction ..................................................................................................................4

2. Preparation....................................................................................................................................5

3. Quick Using Steps ..........................................................................................................................6

3.1 Step 1: Insert SIM Card........................................................................................................7

3.2 Step 2: Install ES610 ............................................................................................................7

3.2.1 Connect Lines to ES610 ............................................................................................8

3.2.2 Connect ES610 to the Vehicle ..................................................................................9

3.3 Step 3: Power On.................................................................................................................9

3.4 Step 4: Set APN, Report Server IP (SMS) ...........................................................................10

3.5 Step 5: Query Current Location (SMS) ..............................................................................12

3.6 Step 6: Login Car Online Platform .....................................................................................13

3.6.1 Visit Car Online Platform........................................................................................13

3.6.2 Login Page ..............................................................................................................13

3.6.3 Register an Account................................................................................................14

3.6.4 Default Account for User ........................................................................................15

3.6.5 Start Tracking..........................................................................................................15

3.6.5 Modes Switch Page ................................................................................................16

3.7 Step 7: Set APN, Report Server IP (AT) ..............................................................................18

3.8 Step 8: Normal Function Test (AT).....................................................................................19

4. Install and Operation...................................................................................................................21

4.1 Installation Method...........................................................................................................21

4.2 Installation Site..................................................................................................................21

4.3 Installation Notes ..............................................................................................................22

5. Supplement .................................................................................................................................23

5.1 LED Indication....................................................................................................................23

5.2 Hardware Interface ...........................................................................................................23

Version history

Version Data Note

V1.0 2013-10-8 First version

V1.1 2013-10-11 Add chapter 3.6.4

Default Account for User

V1.2 2013-11-21 Modify chapter 5.2

Hardware Interface

1. Structure Introduction

①ES610 works with power line and I/O line

②USB port

③Supply power port and I/O port

④Dimension: 83mm*43.2mm*17.7mm

○

Supply power port

I/O port

2. Preparation

Make sure the equipments below are all available.

Equipment Lists:

Equipment Name Number Note

ES610 1 Necessary

GSM SIM Card 1 Necessary

power Line 1 Necessary

I/O Line 1 Necessary

Power supply (12V- 36V) 1 Necessary (Cigarette Lighter/ OBD)

Data line 1 Not Necessary (For AT command)

3. Quick Using Steps

S: Success

F: Fail

…

Fcheck, re-do

Step 1

Insert SIM Card

Step 2

Install ES610

SMS

Step 4 (SMS)

Set APN&IP

Step 5 (SMS)

Normal Function Test

Fcheck, re-do

Step 6

Step 7 (AT)

Set APN,IP

Fcheck, re-do

…

Step 8 (AT)

Normal Function Test

Fcheck, re-do

AT or SMS AT

Step 3

Power on

F check, re-do

3.1 Step 1: Insert SIM Card

Open the terminal cover, and put the metal side of SIM card face down and then fasten the card

slot co ver.

Note:

SIM Hot-Plug is forbidden for this device.

3.2 Step 2: Install ES610

The terminal is GPS positioning product, it is recommended that you follow the instructions to

install.

1. M

etal side faces

2. Fasten card slot

3.2.1 Connect Lines to ES610

First, connect power supply line to ES610.

Plug the part ②of power supply line into ES610 power supply port (chapter 1 ③)

Second, connect I/O line to ES610

①

②

③

④

Power supply line

I/O line

Plug the part ④of power supply line into ES610 power supply port (chapter 1 ③)

3.2.2 Connect ES610 to the Vehicle

Power lines, it can connect with cigarette lighter or OBD

I/O line, connects terminal with the I/O connector of wire harness.

For the detailed description, please refer to chapter 4.

3.3 Step 3: Power On

When finishing installation, as long as power supply line is connected with cigarette lighter or

OBD, ES610 is powered on and starts work.

Note: If ES610 is connected with cigarette lighter, then only the car is ignition on, cigarette lighter

will has voltage. That means, ES610 can be powered on.

(cigarette lighter)

(OBD)

Then, please check LEDs status.

When ES610 is powered on, the two LEDs –Yellow and green LEDs will light for 10 seconds; then,

only green LED will blink four times; after blinking, yellow and green LEDs will blink together. Wait

for a while, yellow LED will light without blink.

The meaning of each LED means, please refer to chapter 5.1, and hardware interface, please refer

to chapter 5.2.

If not, your situation is:

1) No LED lights

Please check the way you power on or the voltage that power supplies.

2) Only green LED lights

Please make sure that SIM card is inserted.

Please make sure that SIM card is available.

Please make sure that SIM card is not hot plug.

Note:

If you want to test all the commands via SMS, please refer to Step 3, Step 4 and Step 5.

Or if set command by USB (AT), please refer to step 7, step 8.

3.4 Step 4: Set APN, Report Server IP (SMS)

The command to re-set APN and server IP is “GPRS”. The format of “GPRS” is shown below.

For example:

The APN of China Mobile is CMNET.

Table of contents

Other esky GPS manuals

esky

esky ES310 User manual

Popular GPS manuals by other brands

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Operating instruction

Garmin

Garmin SOUNDER 125 Owner's manual & reference

Garmin

Garmin DEZL 580 owner's manual

Jigabot

Jigabot EX quick start guide

Pointer

Pointer Cellocator CelloTrack XT LTE overview

Queclink

Queclink GV55LITE user manual

Voxson

Voxson Voxtrack GPS500 Quick user guide

Garmin

Garmin ECHOMAP PLUS owner's manual

Starcom Systems

Starcom Systems Kylos Compact user guide

Garmin

Garmin 15 H Series Technical specifications

Cobra

Cobra Marine MC 600Ci owner's manual

Cellocator

Cellocator CelloTrack T installation guide

Enfora

Enfora Mini-MT GSM2228UG001 user guide

Magellan

Magellan eXplorist 100 Reference manual

LTE

LTE G50B user manual

Garmin

Garmin DEZL OTR500 owner's manual

SkyGolf

SkyGolf SkyCaddie SG1 user guide

esky ES610 Installation and maintenance instructions

Popular GPS manuals by other brands