Esco 10497 User manual

Equipment Supply Company

Instruction Manual

3 Ton Jack Stands - High Performance Style

MODEL 10497

MODEL 10498

MODEL 10499

01.01.2019 V.1

Read this manual and follow All Safety Rules and Operating Instructions before ANY use of this product.

21.800.352.9852 • [email protected] •www.esco.net

3 Ton Jack Stand “High Performance Style” - MODEL #10497, 10498, 10499

CAUTION:

READ AND FOLLOW ALL WARNINGS, CAUTIONS AND INSTRUCTIONS ASSOCIATED WITH

THE PROPER USE OF THIS PRODUCT, FAILURE TO COMPLY COULD RESULT IN DEATH,

BODILY INJURY AND/OR DAMAGE TO EQUIPMENT.

Specications

Model Capacity (Per Stand) Min. Height Max. Height Base Size

10497 3 Ton

6,000 lbs.

13.2”

335mm

21.5”

546mm

12” x12”

305mm

10498 3 Ton

6,000 lbs.

13.2”

335mm

21.5”

546mm

12” x12”

305mm

10499 3 Ton

6,000 lbs.

11”

280mm

17”

432mm

9.5” x 9.5”

241mm

Important Safety Information

Read these safety warnings before operation.

NOTE: The manufacturer is not responsible in any way for any damage that may

result to persons or objects due to improper use of these Jack Stands.

WARNING!

Failure to heed these warnings may result in loss of load, damage to jack stands, and / or jack

stand failure resulting in personal Injury or property damage.

WARNING!

Do not overload jack stands beyond rated capacity. Overloading can cause damage to or failure

of the jack stands and bodily harm. Position load on center of saddle only. Always use stands on

hard level surface capable of sustaining the load. Use of stands on anything other than a hard level

surface can result in stand instability and possible loss of load. It is recommended when lifting front

end or back end of vehicle to use a pair of matching jack stands.

3 Ton Jack Stand “High Performance Style” - MODEL #10497, 10498, 10499

1.800.352.9852 • [email protected] •www.esco.net

Maintenance & Inspection

1. Visual Inspection shall be made before each use of the stands, checking for cracks, cracked

welds and missing and / or damaged parts. Any stand that appears to be damaged in any way

should be removed from service immediately. If in doubt call ESCO - Equipment Supply Co. at

1-800-352-9852.

2. Because of the potential hazards associated with the misuse of equipment of this type, no

modications should be made of the product without consent from manufacturer.

Operation

ALWAYS chock the wheel(s) opposite where you are lifting. Use recommended (2) wheel chocks in

front and behind the wheel(s) to keep vehicle from shifting forward/backward.

• Refer to your vehicle owner’s manual for proper jacking procedures. Lift only on areas of the

vehicle specied by the vehicle manufacturer.

NOTE: If only supporting one corner of the vehicle, place jack stand under the

manufacturers recommended jacking point and adjust the height and lock in with the

pin/linchpin.

SUPPORTING FRONT/REAR END:

If supporting the front or rear end of a vehicle, ALWAYS use jack stands in a pair locked and at the

same height. DO NOT use any other materials such as wood, steel, etc. to gain extra height when

supporting vehicle.

LIFTING ENTIRE VEHICLE:

If lifting the entire vehicle, support the front end rst. Then, using a matching pair locked and set to

the same height, lift the back end of the vehicle.

• Position stands under vehicle at points specied by the vehicle manufacturer as proper load

support points.

ALWAYS inspect the vehicle load and jack stands to make sure that the jack stand(s) is/are

positioned at on the ground on all three sides and the vehicle DOES NOT shake or tilt while

supported.

NOTE: Jack stands are NOT to be used as a permanent lifting/stability solution and

are ONLY to be used during the repair of vehicle. DO NOT leave vehicle on jack

stand(s) for an extended period. This may lead to damage to jack stand(s), vehicle,

and/or worse possible harm/death.

41.800.352.9852 • [email protected] •www.esco.net

3 Ton Jack Stand “High Performance Style” - MODEL #10497, 10498, 10499

Operation (Cont.)

• To adjust stands:

1. Remove Linchpin and chained pin and adjust to the desired height.

2. Place chained pin into hole location and attach the Linchpin and lock pin in.

3. Carefully lower load onto stands.

NOTE: Only attachments and/or adapters supplied by the manufacturer shall be used with these

jack stands. please consult with manufacturer for approved accessories for these jack stands.

Axle Post for lifting

on vehicle axle.

MODEL 10497

Provided Linchpin to Secure

Post to Base using chained

pin.

Flat Removable Rubber Top.

Circular For Maximum Stability.

MODEL 10498 & 10499

Three (3) Leg Circular

Base. Ensure even

weight distribution.

LINCHPIN:

Proper Connection of the Linchpin

to the chained pin as seen above.

Please make sure when receiving

this product all parts are included.

3 Ton Jack Stand “High Performance Style” - MODEL #10497, 10498, 10499

1.800.352.9852 • [email protected] •www.esco.net

NOTES:

______________________________________________________________________________

CONTACT INFO:

www.esco.net - [email protected]

15270 Flight Path Drive

Brooksville, FL 34604

PH. 352.754.1117

Toll Free. 1.800.352.9852 (US, Canada Only)

Fax: 352.754.4508

ESCO - The Proper Tools to Keep Your Equipment Moving!

Stay Connected with ESCO...

This manual suits for next models

Table of contents

Other Esco Jack manuals

Esco

Esco YAK 22/11 User manual

Esco

Esco Pro Series User manual

Esco

Esco YAK 66/33/17 Ton Jack User manual

Esco

Esco 40802 User manual

Esco

Esco 10771 User manual

Esco

Esco 90520 User manual

Esco

Esco 10807 User manual

Esco

Esco Yellow Jackit 10450 User manual

Esco

Esco 10405 User manual

Esco

Esco Pro Series User manual

Esco

Esco 10897 User manual

Esco

Esco YAK 221/N User manual

Esco

Esco YELLOW JACKIT 10399 User manual

Esco

Esco 10493 User manual

Esco

Esco 530AD User manual

Esco

Esco 70131 Parts list manual

Esco

Esco CYCLONE X Series User manual

Esco

Esco 10435 Parts list manual

Esco

Esco YELLOW JACKIT 10812 Technical manual

Popular Jack manuals by other brands

Omega Lift Equipment

Omega Lift Equipment 18122C Operating instructions & parts manual

Pittsburgh

Pittsburgh 58816 Owner's manual & safety instructions

Unimec

Unimec TP Assembly instructions

Sonic

Sonic 4800703 instructions

BGS technic

BGS technic 70039 instruction manual

TradeQuip

TradeQuip 1128T owner's manual

VEVOR

VEVOR TJD-12000SP-F quick start guide

ULTIMATE SPEED

ULTIMATE SPEED URW 2 A1 HYDRAULIC TROLLEY JACK operating instructions

Stels

Stels 51131 user manual

Bushranger

Bushranger RJX01 instruction manual

Clarke

Clarke CTJ2500QLG Operating & maintenance instructions

Valex

Valex 1650520 Translation of the original instructions

Pfaff

Pfaff Merkur M0 Operating instruction

Beta

Beta 3050/K Operation manual and instructions

Sealey

Sealey 1050CXHV manual

Jung

Jung JH Series operating instructions

URIAH

URIAH UC200020 quick start guide

Kennedy

Kennedy KSJ010 instruction manual