ERL B-PRO User manual
B-PRO
Bus Protection Relay
Model 8700/BUS
User Manual
Version 2.1 Rev 2
www . ElectricalPartManuals . com
www . ElectricalPartManuals . com
D01908R02.12 B-PRO User Manual 8700 i
Preface
Information in this document is subject to change without notice.
© 2008 ERLPhase Power Technologies Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of
ERLPhase Power Technologies Ltd. is strictly forbidden.
This manual is part of a complete set of product documentation that includes
detailed drawings and operation. Users should evaluate the information in the
context of the complete set of product documentation and their particular
applications. ERLPhase assumes no liability for any incidental, indirect, or
consequential damages arising from the use of this documentation.
While all information presented is believed to be reliable and in accordance
with accepted engineering practices, ERLPhase makes no warranties as to the
completeness of the information.
All trademarks used in association with B-PRO, F-PRO, L-PRO, ProLogic,
T-PRO, TESLA, TESLA Control Panel, RecordGraph and RecordBase are
trademarks of ERLPhase Power Technologies Ltd.
Windows®is a registered trademark of the Microsoft Corporation.
Procomm®is a registered trademark of Symantec.
HyperTerminal®is a registered trademark of Hilgraeve.
Modbus®is a registered trademark of Modicon.
Contact Information
ERLPhase Power Technologies Ltd.
Website: www.erlphase.com
Email: [email protected]
Technical Support
Email: [email protected]
Tel: 204-477-0591
www . ElectricalPartManuals . com
Preface
ii B-PRO User Manual 8700 D01908R02.12
www . ElectricalPartManuals . com
D01908R02.12 B-PRO User Manual 8700 iii
Version Compatibility and Release History
This chart indicates the versions of Offliner Settings, RecordBase View and the
User Manual which are compatible with different versions of B-PRO firm-
ware.
RecordBase View and Offliner Settings are backward compatible with all ear-
lier versions of records and setting files. You can use RecordBase View to view
records produced by any version of B-PRO firmware and Offliner Settings can
create and edit older setting file versions.
Minor releases (designated with a letter suffix - e.g. v1.1a) maintain the same
compatibility as their base version. For example. B-PRO firmware v1.1b and
Offliner Settings v1.1a are compatible.
B-PRO 8700/BUS Firmware/Software Compatibility Guide
B-PRO
Firmware
Record
Version
Setting
Version
Compatible
Offliner Settings
Compatible
RecordBase View
v2.1a 9 4 v2.1 or greater v1.5d or greater
v2.1 9 4 v2.1 or greater v1.5d or greater
v2.0 9 3 v2.0 or greater v1.5d or greater
v1.1 9 2 v1.1 or greater v1.4 or greater
v1.0 8 1 v1.0 or greater v1.1 or greater
B-PRO 8700/BUS Firmware Revision History
Date Version Changes from Previous Version
2007 Mar 14 v2.1a Improved 87B security
2006 Jun 29 v2.1 Improved 87T target on wye-connected transformers
Separated MVA settings for Bus 1 and Bus 2
Added invert switch on each digital control
Extended transformer MVA setting range
Increased external input glitch filter security
Added support for a backup DNP SCADA Master
2004 Jul 30 v2.0 Added multi bus differential zones (87B-1 and 87B-2).
Added 30 virtual inputs for SCADA controls.
Added swing recording.
Added IO and IR recording to 87T.
Extended Bus MVA setting range.
2004 May 5 v1.1c Corrected SCADA protocol errors
2004 Mar 24 v1.1b Improved the Self Check algorithm to detect DC offset faster.
Fixed reporting of time synchronization status in records.
Fixed handling of user-specified IP addresses with leading
zeros.
www . ElectricalPartManuals . com
Version Compatibility and Release History
iv B-PRO User Manual 8700 D01908R02.12
2003 Jan 17 v1.1a PT Turns Ratio on the System Parameters screen expanded
to allow a setting up to 10000:1.
2002 Aug 08 v1.1 Add CT saturation detector.
Standardized 51 IEEE parameters, user-defined directional
characteristics.
Increased 81 sensitivity for minimum time delay.
2001 Mar 07 v1.0 First release.
B-PRO 8700/BUS Offliner Settings Revision History
Date Offliner
Settings
Version
Changes from Previous Version
2006 Jun 29 v2.1 Separated MVA settings for Bus 1 and Bus 2
Added invert switch on each digital control
Extended transformer MVA setting range
2004 Jul 30 v2.0 Added multi bus differential zones (87B-1 and 87B-2).
Added 30 virtual inputs for SCADA.
Added swing recording capability.
Extended Bus MVA setting range.
2003 Jan 17 v1.1b PT Turns Ratio on the System Parameters screen expanded
to allow a setting up to 10000:1.
2002 Sep 18 v1.1a Correct an error in ProLogic input list.
2002 Aug 12 v1.1 Add CT saturation detector.
Standardized 51 IEEE parameters, user-defined directional
characteristics.
2001 Mar 07 v1.0 First release.
B-PRO 8700/BUS User Manual Revision History
Date Manual
Version
Changes from Previous Version
2008 Feb 29 v2.1 Rev 2 Branded to ERLPhase.
2007 Mar 14 v2.1 Rev 1 Update to include firmware v2.1a support
2006 Jun 29 v2.1 Update to include firmware v2.1 support
2004 Jul 30 v2.0 Rev 1 Update to include firmware v2.0 support
2004 May 5 v1.1 Rev 5 Minor consistency improvements
2004 Mar 24 v1.1 Rev 4 Update to include firmware v1.1b support.
2003 Oct 31 v1.1 Rev 3 Updated format of manual.
B-PRO 8700/BUS Firmware Revision History
www . ElectricalPartManuals . com
Version Compatibility and Release History
D01908R02.12 B-PRO User Manual 8700 v
2003 Jan 17 v1.1 Rev 2 PT Turns Ratio on the System Parameters screen expanded
to allow a setting up to 10000:1.
2002 Aug 12 v1.1 Update to include new functions.
2001 Aug 14 v1.0 Rev 2 Update Setup and Communications.
2001 Mar 07 v1.0 First release.
B-PRO 8700/BUS User Manual Revision History
www . ElectricalPartManuals . com
www . ElectricalPartManuals . com
D01908R02.12 B-PRO User Manual 8700 vii
Using This Guide
This user manual describes the installation and operation of the B-PRO bus
protection relay user interface software. It is intended to support the first time
user and clarify the details of the equipment.
The manual uses a number of conventions to denote special information:
Example Describes
Start>Settings>Control Panel Choose the Control Panel submenu in the Set-
tings submenu on the Start menu.
Right-click Click the right mouse button.
Recordings Menu items and tabs are shown in italics.
service User input or keystrokes are shown in bold.
Text boxes similar to this one Relates important notes and information.
.. Indicates more screens.
Indicates further drop-down menu, click to dis-
play list.
Indicates a warning.
www . ElectricalPartManuals . com
www . ElectricalPartManuals . com
This manual suits for next models
1
Table of contents
Other ERL Relay manuals
