ErgoAV ERMTM1-01B User manual
Model: ERMTM1-01B
TV Wall Mount Instruction Manual
V1.0
THANK YOU FOR CHOOSING THIS ERGOAV PRODUCT!
At ErgoAV, we want to add value to your AV experience by providing the highest
quality products and services in the industry. If you have any concerns or
comments, please contact us.
ErgoAV Customer Care
Phone (877) 419-7832 M-F 8am to 8pm CST
email: [email protected]
website: www.ergoav.com
address: 9501 Louisiana Ave N, #200 Brooklyn Park, MN 55445
English pages 02-14 French pages 15-27 Spanish pages 28-40
Minimum VESA pattern: 200mm/8 in (W)x100mm/4 in (H)
If your TV VESA is greater than 400x400 mm/16x16 in or less than VESA
200x100mm/8x4 in , this mount is NOT compatible.
MAX: 400mm/16 in
MAX: 400mm/16 in
PPLQ
PPLQ
PPLQ
’$1*(5z Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact our Technical
Support line at (877) 419-7832 or customer service at [email protected].
CAUTION: Use with products heavier than the maximum weights indicated may result in
instability causing possible injury.
• Do not use this product for any purposHWKDWLVQRWH[SOLFLWO\VSHFLHGLQWKLVPDQXDO’R
not exceed weight capacity. We are not liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
• This product is designed for use in wood stud, and solid concrete walls. -
DO NOT install
into drywall alone.
• The wall must be capable of supporting four times the weight of the TV and mount
combined.
• Use this mounting system only for its intended use as described in these instructions. Do
not use attachments not recommended by the manufacturer.
• Do not use outdoors.
• Route cords and cables properly to avoid mechanical damage.
• SAVE THESE INSTRUCTIONS
DO NOT exceed the maximum weight indicated. This mounting
system is intended for use only within the maximum weights
indicated. Use with products heavier than the maximum weights
indicated may result in failure of the mount and its accessories,
causing damage and or injury.
If your TV weighs more,
do not use this product.
115lbs/
52.16kg
WARNING
Weight Restrictions
IMPORTANT SAFETY INFORMATION
Check the VESA Pattern of Your TV before the Installation
If this mount is NOT compatible, please contact our Technical Support line at
RUFXVWRPHUVHUYLFHDWVXSSRUW#HUJRDYFRPWRQG DFRPSDWLEOHPRXQW
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
Supplied Parts and Hardware for Step 1
NOTE: The spacers are shown
in actual size.
Spacers
Washer
Verify Your Wall Construction
Supplied Parts and Hardware
Warning: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not use
damaged or defective parts. lf you require replacement parts, please contact our
Technical Support line at (877) 419-7832 or customer service at [email protected]
• Please note: Not all hardware included in this package will be used.
Solid Concrete
Wall
CAUTION
DO NOT
install into
drywall alone Wood Studs
(with Drywall)
Right TV Bracket
x1
02
Left TV Bracket
x1
03
Stud Finder Tape Measure Pencil Electric Drill Level
7/32 in (5.5mm)
Wood Drill
1/2 in (13mm)
Socket Wrench
Phillips
Screwdriver
3/8 in (10mm)
Concrete Drill Hammer
Awl
1HHGHGIRUFRQFUHWHLQVWDOOV
Tools Needed (Not lncluded)
If you are not sure of
the wall construction,
please contact our
Technical Support line
at (877) 419-7832 or
customer service at
x4
B1
M4/M5
x4
B2
M6/M8
L2.5mm
x8
F1
L10mm
x4
F2
L22mm
x4
F3
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
Bolt length: Verify adequate thread engagement with bolts or bolts/spacers
combination. We recommend thread engagement by at least 5 turns.
-Too short will not hold the TV.
-Too long will damage the TV.
Note: Please do not over tighten the TV bolts to avoid damaging your TV.
2QO\RQHEROWVL]HWV\RXU79
Step 1 Secure the TV Brackets to the TV
Select TV Bolts
M6 M8M4
Too short Correct Too long
>2QO\RQHEROWVL]HWV\RXU79@
TV Bolts
NOTE: The bolts are shown in actual size
M4
M6
M8
M4x30mm
x4
C2
M4x12mm
x4
C1
M6x15mm
x4
D1
M8x25mm
x4
E1
M8x50mm
x4
E2
M6x35mm
x4
D2
OR OR
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
03 02
CAUTION: When attach-
ing the TV brackets to the
back of the TV, ensure the
Up Arrows are pointing to the
top of the TV and are equally
centered on the back of the
TV.
PLEASE NOTE: The bolt
hole locations on your TV
may vary in accordance of
the manufacturers design
of the TV. We are only
illustrating possible
locations of the bolt holes.
Please Note: When using the spacers it is important to note that they can be used in
PXOWLOD\HUVPHDQLQJVWDFNHG,I\RXKDYHDQ\GLFXOW\XQGHUVWDQGLQJKRZWRLQVWDOO
the TV bolts or spacers, please contact our Technical Support line at (877) 419-7832
or customer service at [email protected].
Bump
See Option C Cables
See Option D Recessed Holes
See Option E
Spacers
Parts Needed if You Have a TV as Shown Below
F1+F1 F1+F2 F1+F3F1+F1+F2 F1+F1+F3 F2+F3 F1+F2+F3 F1+F1+F2+F3
Curved TV
See Option B
03
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
Option A (For Flat Back TV)
Option B (For Round Back TV)
03
02
C2/D2/E2
B1/B2
F1/F2/F3
03
02
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
Phillips Screwdriver
(Not lncluded)
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
Spacers must be tall enough so that the curve on the back of the TV will not interfere
with the mounting plate.
Refer back to spacer instruc-
tions on page 5, if needed
NOTE: The UP arrow should
point towards the top of TV.
NOTE: The UP arrow should
point towards the top of TV.
Refer back to spacer instructions
on page 5, if needed
(If needed)
C1/D1/E1
B1/B2
F1
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
02
03
Option C (For TV with A “Bump”)
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
Option D (for TV with Cable Interference)
03
C2/D2/E2
B1/B2
F1/F2/F3
Phillips Screwdriver
(Not lncluded)
Phillips Screwdriver
(Not lncluded)
F1/F2/F3 B1/B2
C2/D2/E2
Refer back to spacer instructions
on page 5, if needed
Refer back to spacer instructions
on page 5, if needed
NOTE: The UP arrow
should point towards
the top of TV.
6SDFHUVPXVWEHWDOOHQRXJKVR79EUDFNHWVDUHXVK12
GAP) on bump.
)RUFDEOHLQWHUIHUHQFHXVHVSDFHUV>)@>)@DQG>)@WR
create extra space between the TV and TV brackets.
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
Note: The lag screw is shown in actual size
x4
A1 Lag Screw
5/16X2 3/4 in
Supplied Parts and Hardware for Step 2
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
Wall Plate x1
01
Phillips Screwdriver
(Not lncluded)
Option E (For Recessed Holes
7KHVSDFHUQHHGWROOLQWKHUHFHVVHGKROHVRQWKH
basis of the TV so that the TV brackets are as close to
the TV as possible.
03
C2/D2/E2
B1/B2
F1/F2/F3
Refer back to spacer instructions
on page 5, if needed
Wall Plate Template x1
04
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
16 in (406mm)
OR
2A-1
8VHDVWXGQGHUQRWLQFOXGHGWR
locate wood studs or use an awl
(not included) to verify the edges.
Mark the edge and center locations.
Step 2A Wood Stud Option
Step 2 Attach the Wall Plate [01] to the Wall
For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B
Wall
Anchor
X
A2
x4
Wall
Anchor
10X60mm
This anchor is for concrete
walls ONLY. DO NOT use
them in drywall or wood
studs.
CAUTION!
A2
WARNING:
Ensure the wall plate is securely fastened to the wall before
continuing to the next step.
Do not use a drill for tightening the lag screws! Only use a socket wrench.
1RPLQDOZRRGVWXGVL]HFRPPRQ[LQ[PP
6WXGFHQWHUPXVWEHYHULHG
Avoid potential personal injury or property damage! DO NOT over-tighten the lag
VFUHZV>$@7LJKWHQWKHODJVFUHZV>$@RQO\XQWLOWKH\DUHSXOOHGUPO\DJDLQVW
WKHZDOOSODWH>@
DO NOT USE ANCHOR [A2] FOR THIS STEP.
Awl
(Not lncluded)
6WXGQGHU
(Not lncluded)
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
Install the wall plate using lag
VFUHZV>$@7LJKWHQWKHODJ
VFUHZV>$@LVSXOOHGUPO\
against the wall plate. DO NOT
RYHUWLJKWHQWKHODJVFUHZV>$@
2A-2
2A-3
2A-4 Note: Do not use a drill to tighten the
lag screws. Only use a socket wrench.
A1
01
Drill pilot holes using a 7/32 in
(5.5mm) diameter drill bit. Make
sure the depth is not less than
2 3/4 in (70mm).
1/2 in (13mm)
Socket Wrench
(Not Included)
Level
(Not Included)
Pencil
(Not Included)
Electric Drill
(Not Included)
LQPP
7/32 in
(5.5 mm)
Level
(Not Included)
Position the ZDOOSODWHWHPSODWH>@
at your desired height and line up
the holes with your stud center line.
Level the ZDOOSODWHWHPSODWH>@
and mark the holes.
04
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
Table of contents
Languages:
Other ErgoAV TV Mount manuals
ErgoAV
ErgoAV ERMMS1 -01 B User manual
ErgoAV
ErgoAV ERMTM2-01B User manual
ErgoAV
ErgoAV ERMTL1-01B User manual
ErgoAV
ErgoAV ERDHM1-01B User manual
ErgoAV
ErgoAV ERMTS1-01B User manual
ErgoAV
ErgoAV ERTSS2-01B User manual
ErgoAV
ErgoAV ERTSM2-01B User manual
ErgoAV
ErgoAV ERMCM1-01B User manual
ErgoAV
ErgoAV ERDHM2-01B User manual
ErgoAV
ErgoAV ERMTM2-01B User manual
