ErGear EGCM12 User manual
Thank you for choosing this Ergear product! At Ergear we strive to
provide you with the best quality products and services in the industry.
Should you have any issues, please don't hesitate to contact at sup-
[email protected] (US/CA/DE/UK/FR/IT/ES/AU)
V3.0
Monitor Desk Mount
Instruction Manual
Model:EGCM12
IMPORTANT SAFETY INFORMATION
• Check package contents against Supplied Parts and Hardware List to assure
that all components were received undamaged. Do not use damaged or defective
parts. lf you require replacement parts, contact customer service at support@er-
gear.com
• Not all parts and hardware included will be used.
• Carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact
• This product may contain moving parts. Use with caution.
• Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We cannot be liable for damage or injury
caused by improper mounting, incorrect assembly or inappropriate use.
M10
C1(1PC)
M10
C2(1PC)
M4X12MM
A1(4PCS)
M4X16MM
A2(4PCS)
L5mm
B (4PCS)
M6X12MM
C3(1PC)
M8X10MM
D(2PCS)
M6X8MM
E(2PCS)
Large Allen Key
F1(1PC)
Small Allen Key
F2(1PC)
a(1PC) b(1PC) (1PC)
c
F (1PC)
M6X16MM
Tools Needed (Not Included)
Supplied Parts and Hardware
STEP 1 Install the Base
1
Phillips Screwdriver
F2
E
C3
D
F1
Option A：
C-Clamp Installation
2
STEP 1A Install the Base(C Clamp Mount Option)
b
C1
C2
a
b
b
Desk Thickness
2 11/64 in(55mm) - 3 5/32 in.(80mm)
Desk Thickness
1 3/16 in.(30mm) - 2 11/64 in(55mm)
Desk Thickness
3/8 in.(10mm) - 1 3/16 in.(30mm)
Option B：Grommet Installation
Phillips
Screwdriver
(Not Included)
75x75mm
100x100mm
A1
B
75x75mm
100x100mm
A2
Flat back monitor Round back monitor
STEP 2 Secure Monitor Connector to Pole Assembly
STEP 3 Attach VESA Plate to the Back of Monitor
3
c
F1
100x100mm=3 15/16x3 15/16in.
75x75mm=2 61/64x2 61/64in.
STEP 4 Hang the Monitor to the Monitor Connector
4
FF2
2X Cable tie
Height Adjustment
F1
Tilt Adjustment
STEP 5 Adjust the Tilt Angle and Manage the Cables
All of us at Ergear do appreciate your product purchase. We hope that you
are as happy with your product as we are designing and manufacturing it for
you. We strive to provide you with the best quality products and services in
the industry. If you have any questions please don't hesitate to contact us at
[email protected] (US/CA/DE/UK/FR/IT/ES/AU)
Thank you again
for choosing this Ergear product!
Other manuals for EGCM12
1
Table of contents
Other ErGear Rack & Stand manuals
ErGear
ErGear EGDS6 User manual
ErGear
ErGear EGDS2 User manual
ErGear
ErGear EGDS3 User manual
ErGear
ErGear EGSS2 User manual
ErGear
ErGear EGSS3 User manual
ErGear
ErGear EGTS5B User manual
ErGear
ErGear EGCM12 User manual
ErGear
ErGear EGDS9 User manual
ErGear
ErGear EGDS15B User manual
ErGear
ErGear EGDS7 User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
