Erbauer ERP406IPD User manual
10.8V IMPACT DRIVER ERP406IPD
ERP406IPD
Original Instructions
(Version 3.0)
10.8V IMPACT DRIVER ERP406IPD
GUARANTEE
This product carries a 2 year guarantee. If your product develops a fault within this
period, you should in the rst instance contact the retailer where the item was purchased.
This guarantee specically excludes losses caused due to:
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items (such as batteries)
- Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods
This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.
For further technical advice, spare parts or repair service (outside of guarantee) please con-
tact the customer helpline number on 0345 607 6380.
Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This
product should give you reliable service but for your peace of mind this
power tool does carry a 2 year guarantee, the terms of which are detailed below.
If this product develops a fault within the guarantee period contact your retailer.
Please retain this handbook in case you need to refer to safety, care or guarantee
information in the future.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
10.8V IMPACT DRIVER ERP406IPD
unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power tool
while you are tired or under the inuence of drugs, alcohol
or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying power
tools with your nger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended could
result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of re when used with another battery
pack.
b) Use power tools only with specically designated battery
packs. Use of any other battery packs may create a risk of injury
and re.
c) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together
may cause burns or a re.
10.8V IMPACT DRIVER ERP406IPD
d) Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, ush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a qualied repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY RULES FOR YOUR CORDLESS IMPACT DRIVER
1. Remove the battery pack from the impact driver before carrying
out adjustments.
2. Do not expose to rain or water.
3. Do not store the battery pack in temperatures over 40oC.
4. Always charge the battery pack between temperatures 0oC to
30oC. Ideal charging temperature is 18oC to 24oC.
5. Only use the charger and the battery pack provided , no other
battery and charger are suitable.
6. Avoid short circuit of the battery pack connections (screws &
nails).
7. Do not incinerate or burn the battery pack, it may explode.
8. Do not charge a damaged battery pack.
9. Replace any damaged supply cords on your charger, this must be
carried out by a suitably qualied person.
10. Always disconnect the charger power supply before making or
breaking the connections to the battery pack.
11. Battery pack and charger will be warm during charging, this is
normal.
12. When not in use, remove a charged battery pack from the charger.
13. Always remove the battery pack from the charger immediately
after re-charging is completed.
14. Your impact driver and battery pack will be warm when working,
this is normal.
15. Do not dispose of batteries in re, or with household waste. Return
exhausted batteries to your local collection or recycling point.
16. Wear ear protection when operating cordless impact driver.
Exposure to noise can cause hearing loss.
17. Accessories and metal parts can become very hot.
18. Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and could give the
operator an electric shock.
FOR CHARGER
1. This appliance is not intended for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
2. Charger is double insulated for additional electrical safety.
3. Charger is for indoor use only.
4. If the charger supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons in
order to avoid a hazard.
5. Never charge damaged batteries as these can short circuit and
over heat.
6. When the charger is in use it MUST be supervised , if there is
any evidence of overheating then IMMEDIATELY disconnect the
charger from the power supply.
7. If gas or smoke is emitted from the battery during charging switch
off the power supply , and move to a well vented area to allow the
fumes to vent to atmosphere.
Caution is there is leaking liquid from the battery wear protective
clothing, glasses and clothes as this can be acidic.
8. Always disconnect battery charger and remove battery from
charger when the charging is complete.
9. Only use the battery charger specically stated on the base of
the battery.
10.8V IMPACT DRIVER ERP406IPD
FOR BATTERY
1. Always remove the battery pack from the charger immediately
after re-charging is completed.
2. When not in use, remove a charged battery pack from the
charger.
3. Do not charge a damaged battery pack.
4. Do not charge non-rechargeable batteries.
5. Do not install the battery backwards so the polarity is reversed.
6. Do not connect the positive terminal and negative terminal of the
battery to each other with any metal object (such as wire).
7. Do not carry or store battery together with necklaces, hairpins or
other metal objects.
8. Do not pierce the battery with nails, strike the battery with a
hammer, step on the battery or otherwise subject it to strong
impacts or shocks.
9. Do not solder directly onto the battery.
10. Do not expose battery to water or salt water, or allow the battery
to get wet.
11. Do not disassemble or modify the battery. The battery contains
safety and protection devices, which, if damaged, may cause
the battery to generate heat, explode or ignite. The protection
circuit module provided with battery packs is not to be used as a
substitute for a shut-off switch.
12. Do not place the battery in or near re, on stoves or other high
temperature locations. Do not place the battery in direct sunlight,
or use or store the battery inside cars in hot weather. Heating
the battery can damage the safety circuitry, which can cause
additional heating, rupture or ignition of the battery. Using the
battery in this manner may also result in a loss of performance
and a shortened life expectancy.
13. Do not place the battery in microwave ovens, high-pressure
containers or on induction cookware.
14. If you intend to store a battery for a period without use then store
battery at room temperature (19°C to 25°C), charged to about
30 – 50% of capacity. When storing for very long periods boost-
charge the battery once per year to prevent over discharge.
15. Always charge the battery in a temperature range of 0°C to 30°C
and discharge in a temperature range of 0°C to 75°C.
16. The battery pack and charger will be warm during charging, this
is normal.
17. Do not continue charging the battery if it does not recharge within
the specied charging time. Doing so may cause the battery to
become hot, explode or ignite. The temperature range over which
the battery can be charged is 0°C to 30°C. Charging the battery
at temperatures outside this range may cause severe damage to
the battery or reduce battery life expectancy.
18. When the battery is worn out, insulate the terminals with
adhesive tape or similar materials before disposal.
19. Do not dispose of batteries in re, or with household waste.
Return exhausted batteries to your local collection or recycling
point.
Warning: If a small amount of electrolyte should leak from
the battery pack under extremes of temperature or after
heavy use, then wash off immediately from your skin and hands
using clean water. For eye contact, rinse thoroughly with clean
water and seek medical treatment immediately.
Warning: Some dust particles created by power sanding, sawing, grinding, drill
and other construction jobs contain chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated timber.
Your risk from these exposures varies, depending upon how often you do this type of work. To
reduce your exposure to these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as those dust masks that are specially
designed to lter microscopic particles.
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to help reduce
hand arm vibration syndrome injuries to power tool users. The directive requires power tool
manufacturers and suppliers to provide indicative vibration test results to enable users to
make informed decisions as to the period of time a power tool can be used safely on a daily
basis and the choice of tool.
Further Advice can be found at www.hse.gov.uk
Table of contents
Other Erbauer Impact Driver manuals
