epur OAKBOT EOX 4.2 Series User manual
DOCUMENT
epur
User’s Manual
OAKBOT EOX series 4.2
Original Manual
epur | USER’S MANUAL
www.epur.io - - | 2 | - - contact@epur.io
Contents
Contents........................................................................2
After-Sales Service.........................................................3
General Conditions of use and important warnings................................4
Items Supplied..................................................................6
Clamping Module.............................................................6
Machining Module............................................................7
Control Unit................................................................8
Toolbox.....................................................................8
General Specifications.....................................................11
General Recommendations........................................................12
General....................................................................12
Handling...................................................................12
Environment................................................................13
Test Conditions............................................................14
Warning about dimensioning assemblies......................................15
Safety.....................................................................15
Instructions for use...........................................................21
#1 - Aim...................................................................21
#2 - Starting up the OAKBOT................................................21
#3 - Shutting down the machine.............................................23
#4 - Milling Tools.........................................................24
#5 - Calibration...........................................................30
#6 – Preparing the pieces of wood..........................................38
#7 – Putting the Clamping Module in place..................................39
#8 - Use...................................................................43
#9 – Using the device for prohibiting access to the machining zone.........48
#9 – Using the user interface..............................................52
#10 – Extraction unit......................................................66
#11 - Maintenance..........................................................67
#12 – Safety Pictograms....................................................71
#13 – Personal Protective Equipment........................................72
Warranty.......................................................................73
Warranty Period............................................................73
Scope of the Warranty......................................................73
Conditions of application of products......................................74
epur | USER’S MANUAL
www.epur.io - - | 3 | - - contact@epur.io
Introduction
Thank you for purchasing an EPUR OAKBOT digital milling machine.
In order to ensure use in optimum conditions, get the best results possible and
be familiar with safety measures, please familiarize yourself with this manual
from A to Z.
/!\ CAUTION /!\
Read this manual in its entirety before beginning to use the OAKBOT.
Please read the instructions for use and warnings carefully so as to use your
digital milling machine in complete safety.
After-Sales Service
You can contact the After-Sales Service:
by e-mail at the following address:
by surface mail at the following address:
EPUR SAS
Hameau de Caillens - 11140 - Rodome - France
or by telephone at: +33(0)4 68 31 29 11
The photographs in this manual are not contractually binding.
All rights reserved, in particular the right to reproduce, disseminate and translate.
Reproduction in any form whatsoever, as well as recording, processing, duplication and
dissemination hereof, even in part, by any means whatsoever are prohibited unless the EPUR SAS
Company authorizes such in writing.
epur | USER’S MANUAL
www.epur.io - - | 4 | - - contact@epur.io
General conditions of use and important
warnings
/!\ CAUTION /!\
Respecting the following precautions is essential. Failure to comply with this
may result in irreversible material damage to the product and/or its environment
and cause serious bodily injury, risk of fire and/or death. These precautions are
not exhaustive and in no way substitute the elementary rules of safety concerning
an item of professional equipment intended for machining work.
The machine has inbuilt safety systems. Do not remove them and see that they
stay in place and remain in good working order.
For your own safety, wearing personal protective equipment is mandatory. This
includes ear defenders, protective eyewear and safety footwear. Wear suitable
clothing when using the machine.
Never carry out any work on the milling machine or insert anything, when it is
powered up or operating, as this would risk causing serious injury.
Do not place anything on your milling machine, either externally or internally,
keep it clean and clear it regularly of all deposits and waste resulting from
machining operations. Do not use alcohol-based cleaning products or solvents
for cleaning your machine.
Machine just wood. Any other material machined using the OAKBOT would release
the EPUR SAS Company from all liability in the event of damage to people or
property.
epur | USER’S MANUAL
www.epur.io - - | 5 | - - contact@epur.io
Only use milling tools supplied by EPUR with the OAKBOT.
Do not cover your milling machine during operations as this might lead to
overheating.
Connect the control unit to the milling machine via the dedicated cable.
Connect your milling machine to the power supply with the cable supplied to a
suitable socket and check the status of the power supply cable. A single, direct
connection is preferable to accumulating with other plugs.
Do not use the machine in a dangerous environment, as it is an electrically-
powered system. It must be connected to the mains power supply or an electrical
generator. It runs on 220 volts. Do not use in damp places or places exposed
to rain.
Do not use or leave electrical tools near flammable liquids or in gaseous or
explosive atmospheres. The motors may generate sparks and catch fire.
When changing accessories, only use those tools that we have supplied for this
purpose.
Do not force tools or accessories if they do not work properly, as it is certain
that there is a problem. Check out what could be causing this.
It is prohibited to disassemble and/or modify your digital milling machine. Any
part that has been disassembled or modified will no longer be covered by the
manufacturer’s warranty, unless the latter expressly agrees to such.
When changing milling cutters and before using again, check that you have
removed any tool, spanner or similar items from the machine and its area of
use.
Before starting up the Oakbot, check that any object in the machining zone is
removed that might come into collision with the milling cutter and possibly
injure the operator, disrupt your machine or even seriously damage it.
Place your milling machine on stable wooden blocks that can take its weight.
Vibrations from the milling machine may unbalance any inadequate support and
cause the unit to fall over, which may result in serious injuries and damage
to machine and environment, and possibly cause fires.
Use the clamping system as recommended in this manual and do not use in any
other way. Poor clamping may lead to the machine falling over, causing serious
injuries and damage to the system and its environment.
epur | USER’S MANUAL
www.epur.io - - | 6 | - - contact@epur.io
The machine must be kept under supervision during the first few seconds of the
milling process. If clamping is not properly ensured, this often leads to
uncoupling at the beginning of the machining process.
Wait for the machine and the spindle to stop completely before handling
workpieces or the machine.
The OAKBOT which comes with its clamping system and handling trolley is a unit.
No machining must be carried out or movement made without the robot being
engaged on the clamping system and suspended on its trolley.
Items Supplied
Clamping Module
Mass: 18 kg
epur | USER’S MANUAL
www.epur.io - - | 7 | - - contact@epur.io
Machining Module
Mass: 35 kg
epur | USER’S MANUAL
www.epur.io - - | 8 | - - contact@epur.io
Control Unit
Toolbox
Systainer toolbox
Tenon milling cutter – Cylindrical mortise Ø20mm
epur | USER’S MANUAL
www.epur.io - - | 9 | - - contact@epur.io
Conical dovetail milling cutter Ø max 40 mm
ER32 spanner wrench & #32 flat spanner
ER32 collet chuck - 20 mm + nut
Table of contents
