Epson PowerLite 84 System manual

Other manuals for PowerLite 84

4

Table of contents

Other Epson Projector manuals

Epson

Epson EH-LS100 User manual

Epson

Epson PowerLite W16 Installation instructions

Epson

Epson EB-L1500U Technical manual

Epson

Epson PowerLite 503c User manual

Epson

Epson 1705C - PowerLite XGA LCD Projector Quick start guide

Epson

Epson EB-L1755U Technical manual

Epson

Epson PowerLite 8150i User manual

Epson

Epson EB-1960 User manual

Epson

Epson BrightLink 575Wi User manual

Epson

Epson EX3220 User manual

Epson

Epson PowerLite 955W User manual

Epson

Epson Home Cinema 4010 Specification sheet

Epson

Epson EB-W02 User manual

Epson

Epson EMP-S1H User manual

Epson

Epson EB-1915 User manual

Epson

Epson PowerLite 600p Specification sheet

Epson

Epson PowerLite 5510 User manual

Epson

Epson Pro L12000QNL User manual

Epson

Epson EB-S11 User manual

Epson

Epson EH-LS10000 User manual

Epson

Epson EMP-73 Instruction sheet

Epson

Epson PowerLite Home Cinema 1450 Specification sheet

Epson

Epson PowerLite Pro Z8000WUNL User manual

Epson

Epson EMP-835 User manual

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual

Asus

Asus ZenBeam Latte user manual

BOXLIGHT

BOXLIGHT CP-322i/CP-634i user manual

JVC

JVC 1108TTH-AO-AO instructions

INSTALLATIONHANDBOOK

Lamp and Status Information

Epson PowerLite 84

Replacing the Lamp

The life span of the projection lamp is about 5000 hours if

BrightnessControlin the Setting menu is set to High (default), and

6000 hours if BrightnessControlis set toLow.

It is time to replace the lamp when:

The projected image gets darker or starts to deteriorate.

The message Replace the lamp appears on the screen when the

lamp comes on and the lamp warning light ashes orange. To

maintain projector brightness and image quality, replace the lamp

as soon as possible.

The lamp warning light ashes red (the lamp is burnt out).

Contact your dealer or call Epson at 800-GO-EPSON

(800-463-7766). Request part number V13H010L50.

Replacing the Lamp

1. Turn o the projector.

2. When the Ppower light stops ashing, unplug the power cord.

3. Let the projector cool for at least an hour (if it has been on). The

lamp is extremely hot immediately after use.

4. Loosen the lamp cover screw (you can’t remove it). Then slide the

lamp cover and lift it o of the projector.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 84

5. Loosen the two screws holding the lamp in place (you can’t

remove them).

Loosen, but don’t

remove these screws

6. Hold the lamp as shown and pull it straight out.

7. Gently insert the new lamp. (If it doesn’t easily, make sure it is

facing the right way.)

8. Push down the side marked PUSH until it snaps in.

note

The lamp(s) in this

product contain mercury.

Please consult your state and

local regulations regarding

disposal or recycling. Do not

put in the trash.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 84

9. Once the lamp is fully inserted, tighten its screws.

10. Replace the lamp cover, then tighten its screw.

11. Reset the lamp timer as described page.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the

projector’s menus.

1. Press the

Menubutton on the remote control or on the

projector’s control panel. You see the main menu.

2. Use the buttons on the remote control (or the arrow buttons

on the projector) to highlight Reset, then press Enter.

You see this screen:

3. Select

Reset Lamp Hoursand press Enter.

4. When you see the prompt, select Yes and press Enter.

5. When you’re nished, press Esc or Menuto exit the Menu

system.