Epson EX7200 User manual
Setting Up the Projector 31
Connecting to a Computer
You can connect the projector to a Windows or Macintosh computer
using the projector’s TypeB USB port. This lets you carry a
lightweight cable with you when you transport the projector (see
page 31).
You can connect the projector to any computer that has a standard
video output (monitor) port, including desktop models, PC and
Macintosh computers, and hand-held devices. See page 34 for
instructions.
To play sound through the projector, connect an audio cable (see
page 41).
You may be able to use your remote control as a wireless mouse when
projecting from a computer (see page 61).
Connecting to the USB Port
You can connect a PC with a 32-bit version of Windows 7, Windows
Vista®, Windows XP, or Windows 2000 (SP4) or a Macintosh
computer with OS X 10.5.1 or 10.6.x to the projector’s TypeB
(square) USB port and project your computer’s display. A USB
2.0 connection (recommended) provides better picture quality and
response than USB 1.1.
1. Follow the instructions beginning on page 45 to turn on the
projector.
2. Make sure the USB Type B setting on the Extended menu is set
to USB Display (see page 75).
3. Turn on your computer.
note
To connect a Macintosh
that includes only a Mini
Display Port or Mini-DVI
port for video output, you
need to obtain an adapter
that allows you to connect to
the projector's VGA video
port. Contact Apple for
compatible adapter options.
32 Setting Up the Projector
4. Connect the square end of a USB cable to the projector’s TypeB
(square) USB port.
5. Connect the flat end of the cable to any available USB port on
your notebook or desktop computer.
The first time you connect a computer to the projector’s USB
port, you will need to install software from the projector on your
computer (see page 33).
6. You can connect an optional audio cable if you want to play
sound through the projector (see page 41).
When you’ve finished making connections, see Chapter 2 for
instructions on displaying and adjusting the image.
When you’re done projecting from your computer, disconnect the
USB cable.
VS200/EX3200
USB TypeB port USB TypeB port
EX5200/EX7200
Setting Up the Projector 33
Installing Software
The first time you connect a computer to the projector’s USB port,
you will need to install software from the projector on your computer.
Follow the instructions for your operating system.
Windows 7 and Windows Vista
When you see the Auto Play window, click Run EMP_UDSE.EXE.
Follow the instructions on the screen to install the Epson USB
Display software.
After the software is installed, you see your computer’s current
desktop displayed by the projector. You can switch the projector to
other image sources using the Source Search button on the remote
control or the projector.
Windows XP and Windows 2000
Follow the instructions on the screen to install the Epson USB
Display software.
After the software is installed, you see your computer’s current
desktop displayed by the projector. You can switch the projector to
other image sources using the Source Search button on the remote
control or the projector.
Macintosh
The setup folder for USB display is displayed in the Finder.
Double-click the USB Display Installer icon and follow the
on-screen instructions to install the software.
After the software is installed, you see your computer’s current
desktop displayed by the projector. You can switch the projector to
other image sources using the Source Search button on the remote
control or the projector.
note
If the software screen does
not display automatically,
double-click Computer or
My Computer, then
double-click
EPSON_PJ_UD.
note
It may take a few minutes
before the computer’s
desktop is displayed by the
projector.
34 Setting Up the Projector
Connecting to the VGA Computer Port
You can connect to the projector using the VGA computer cable that
came with it (the monitor port on your computer must be a D-sub
15-pin port).
1. Connect one end of the VGA computer cable to the projector’s
Computer (Component Video) port and the other end to your
computer’s monitor port.
2. You may need to change the Input Signal setting in the
projector’s Signal menu to RGB or Auto (see page 72).
3. You can connect an optional audio cable to play sound through
the projector (see page 41).
caution
Don’t try to force a
connector to fit a port with a
different shape or number of
pins. You may damage the
port or connector, or the
device you are trying to
connect.
VS200/EX3200
Computer (Component
Video) port
EX5200/EX7200
Computer (Component
Video) port
Setting Up the Projector 35
4. You may also be able to use the remote control as a wireless mouse
(see page 61).
When you’ve finished making connections, see page 45 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Connecting to Video Equipment
You can connect several video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
■EX5200/EX7200 only: If your video device has an HDMI
connector, see “Connecting an HDMI Video Source (EX5200/
EX7200 Only)” on page 36.
■If your video device has a yellow RCA video output connector, see
“Connecting a Composite Video Source” on page 37.
■If your video device has an S-Video connector, see “Connecting
an S-Video Source” on page 38.
■If your video device has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a
Component Video Source” on page 39.
■If your video device has an RGB video port, see “Connecting an
RGB Video Source” on page 40.
After connecting video cables, you may also want to connect an
optional audio cable to play sound through the projector; see page 41.
If you connect using an HDMI cable (EX5200/EX7200 only), the
video and sound are both transferred and you won’t need to connect
any additional cables for audio.
36 Setting Up the Projector
Connecting an HDMI Video Source (EX5200/
EX7200 Only)
For the best image and sound quality, connect your video equipment
to the HDMI (High-Definition Multimedia Interface) port, if
possible.
Connect an HDMI cable to the HDMI connector on your video
equipment and the HDMI connector on the projector.
When you’ve finished making connections, see page 45 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If an HDMI cable was not
p
rovided with your video
equipment, you can
p
urchase one from an
electronics dealer. HDMI port
Setting Up the Projector 37
Connecting a Composite Video Source
1. If your video cable has an RCA connector, connect it to the
yellow video output connector on your device and the yellow
Video port on the projector.
2. If you want to play sound through the projector, see page 41 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 45 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the video cable was not
p
rovided with your video
device, you can purchase one
f
rom an electronics dealer.
VS200/EX3200
Video port
EX5200/EX7200
Video port
38 Setting Up the Projector
Connecting an S-Video Source
1. Connect the S-Video cable to the S-Video connector on your
device and the S-Video port on the projector.
2. If you want to play sound through the projector, see page 41 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 45 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the S-Video cable was not
p
rovided with your video
device, you can purchase one
f
rom Epson; see page 18. VS200/EX3200
S-Video port
EX5200/EX7200
S-Video port
Setting Up the Projector 39
Connecting a Component Video Source
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a
component-to-VGA video cable from Epson (see page 18) or an
electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the Y/
Cb/Cr (or Y/Pb/Pr) connectors on your device.
2. Connect the other end of the cable (HD15 male) to the
Computer (Component Video) port on your projector using an
optional component-to-VGA video cable or adapter.
3. You may need to change the Input Signal setting in the
projector’s Signal menu to Auto (see page 72).
VS200/EX3200
Computer (Component
Video) port
EX5200/EX7200
Computer (Component
Video) port
40 Setting Up the Projector
4. If you want to play sound through the projector, see page 41 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 45 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Connecting an RGB Video Source
You can connect to an RGB video source using the VGA computer
cable provided with the projector.
1. Connect the cable to the RGB video port on your player and the
Computer (Component Video) port on the projector.
2. You may need to change the Input Signal setting in the
projector’s Signal menu to RGB (see page 72).
VS200/EX3200
Computer (Component
Video) port
EX5200/EX7200
Computer (Component
Video) port
Other manuals for EX7200
1
Table of contents
Other Epson Projector manuals
Epson
Epson PowerLite Home Cinema 5030UB User manual
Epson
Epson Pro L1500UH User manual
Epson
Epson 9000i - PowerLite SXGA LCD Projector User manual
Epson
Epson PowerLite 1870 User manual
Epson
Epson EX3200 Specification sheet
Epson
Epson EX100 Specification sheet
Epson
Epson EB-595Wi User manual
Epson
Epson EMP-7850 User manual
Epson
Epson EH-TW6700W User manual
Epson
Epson PowerLite 1985WU User manual
Epson
Epson PowerLite 1940W User manual
Epson
Epson EB-L735U User manual
Epson
Epson PowerLite Pro Z8000WUNL User manual
Epson
Epson EB-925 User manual
Epson
Epson 1440 Specification sheet
Epson
Epson EB-L1755U Technical manual
Epson
Epson PowerLite 505c User manual
Epson
Epson PowerLite Pro G6170 User manual
Epson
Epson BrightLink 450Wi - Interactive Projector User manual
Epson
Epson EB-PU2116B User manual
